February 2010 - FreeSWITCH-users - FreeSWITCH Mailing Lists

outgoing dialplans for australia
by Brian May 22 Feb '10

22 Feb '10

Hello again! Ok, after spending several hours trying to debug why incoming calls didn't work, for two separate issues (2nd time I accidentally set "Do not disturb" on my VOIP client. Duh!), I am feeling slightly lazy... Anyone got a set of rules for outgoing calls (Australia) that they are willing to share? Even if I don't use it directly, it may help me understand this new XML based syntax (I am only really familiar with the Asterisk dialplan syntax). As a specific example of something I am unsure of, is it possible to have it try and dial using a sip provider, and if that fails try the zap port? I don't want it to fall back to the zap port though if the person doesn't answer or is engaged, only if there is a problem with the SIP connection (e.g. Internet connection down). Thanks. -- Brian May <brian(a)microcomaustralia.com.au>

2 3

list all users
by Brian May 21 Feb '10

21 Feb '10

Hello, How do I get a list of all users? Including users that are not registered yet? (note: I have already changed the domain to microcomaustralia.com.au) I have tried: freeswitch@voyage> user_exists brian(a)microcomaustralia.com.au false i believe this user should be defined in conf/directory/default/brian.xml, however it is like nothing in conf/directory/default.xml is being read. I want to prove if this is the case or not. When I try to register I get this error: 2010-02-21 13:09:02.568081 [WARNING] sofia_reg.c:1019 SIP auth failure (REGISTER) on sofia profile 'internal' for [brian(a)microcomaustralia.com.au] from ip 192.168.87.14 which I think might be because it can't find the matching user entry. Thanks -- Brian May <brian(a)microcomaustralia.com.au>

3 12

ASTPP For FreeSWITCH
by Michael Collins 21 Feb '10

21 Feb '10

Hey all, Here's a quick story <http://www.freeswitch.org/node/239> about ASTPP and FreeSWITCH. If you are using ASTPP with FreeSWITCH please let me know how it works. I didn't see any information on our wiki about ASTPP. If ASTPP is viable then we should document it as best we can. Thanks! -Michael

3 4

codec negociations
by Madovsky 21 Feb '10

21 Feb '10

Hi, is it possible for FS to take the callee codec from an interant call to external as reference ? example: userA (with only GSM) from FS calls whoeverUser@whateverdomain, this whoeverUser has only PCMU codec, so FS has a list of GSM,PCMU,PCMA and so starts to transcode from PCMU to GSM. I succeed to do the contrary (it transcodes from external to internal phone) Thanks Franck

1 0

openzap TDM400 card
by Brian May 21 Feb '10

21 Feb '10

Hello, I think I have the config correct, and not confused FXO/FXS anywhere. voyage:/opt/freeswitch/conf# ztcfg -vv Zaptel Version: 1.4.11 Echo Canceller: MG2 Configuration ====================== Channel map: Channel 01: FXO Kewlstart (Default) (Slaves: 01) Channel 02: FXO Kewlstart (Default) (Slaves: 02) Channel 03: FXS Kewlstart (Default) (Slaves: 03) Channel 04: FXS Kewlstart (Default) (Slaves: 04) 4 channels to configure. voyage:/opt/freeswitch/conf# cat openzap.conf [span zt FXO1] name => OpenZAP-FXO1 number => 1 fxo-channel => 1 [span zt FXO2] name => OpenZAP-FXO2 number => 2 fxo-channel => 2 [span zt FXS1] name => OpenZAP-FXS1 number => 3 fxs-channel => 3 [span zt FXS2] name => OpenZAP-FXS2 number => 4 fxs-channel => 4 voyage:/opt/freeswitch/conf# cat autoload_configs/openzap.conf.xml <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/>    </settings>  <analog_spans> <span id="1"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-analog-option" value="3-way"/>  </span> <span id="2"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-analog-option" value="3-way"/>  </span> <span id="3"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> <span id="4"> <param name="tonegroup" value="au"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </span> </analog_spans> </configuration> freeswitch@voyage> reload mod_openzap 2010-02-20 16:45:53.312813 [NOTICE] switch_loadable_module.c:464 Deleting Endpoint 'openzap' 2010-02-20 16:45:53.312813 [NOTICE] switch_loadable_module.c:545 Deleting Application 'disable_ec' 2010-02-20 16:45:53.312813 [NOTICE] switch_loadable_module.c:572 Deleting API Function 'oz' 2010-02-20 16:45:53.312813 [CONSOLE] switch_loadable_module.c:1277 Stopping: mod_openzap 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:1:1 fd:36 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:2:1 fd:40 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:3:1 fd:41 2010-02-20 16:45:53.312813 [INFO] zap_io.c:269 Closing channel zt:4:1 fd:42 2010-02-20 16:45:53.612813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.162813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.162813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.162813 [ERR] ozmod_analog.c:951 Failure Polling event! [no matching descriptor] 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2694 Unloading /opt/freeswitch/mod/ozmod_analog.so 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2679 Unloading IO zt 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2694 Unloading /opt/freeswitch/mod/ozmod_zt.so 2010-02-20 16:45:54.322813 [CONSOLE] switch_loadable_module.c:1297 mod_openzap unloaded. 2010-02-20 16:45:54.322813 [NOTICE] zap_io.c:2778 Modules configured: 1 2010-02-20 16:45:54.322813 [NOTICE] ozmod_zt.c:1161 Using Zaptel control device 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2579 Loading IO from /opt/freeswitch/mod/ozmod_zt.so [zt] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:556 Setting rxgain val to 0.000000 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:565 Setting txgain val to 0.000000 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2379 auto-loaded 'zt' 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 1 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:36 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 2 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 2 as OpenZAP device 2:1 fd:40 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 3 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 3 as OpenZAP device 3:1 fd:41 2010-02-20 16:45:54.322813 [WARNING] ozmod_zt.c:333 this ioctl fails on older zaptel but is harmless if you used ztcfg [device /dev/zap/channel chan 4 fd 27 (Invalid argument)] 2010-02-20 16:45:54.322813 [INFO] ozmod_zt.c:385 configuring device /dev/zap/channel channel 4 as OpenZAP device 4:1 fd:42 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2502 Configured 4 channel(s) 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2596 Loading SIG from /opt/freeswitch/mod/ozmod_analog.so 2010-02-20 16:45:54.322813 [INFO] zap_io.c:2712 auto-loaded 'analog' 2010-02-20 16:45:54.358813 [CONSOLE] switch_loadable_module.c:900 Successfully Loaded [mod_openzap] 2010-02-20 16:45:54.362813 [NOTICE] switch_loadable_module.c:144 Adding Endpoint 'openzap' 2010-02-20 16:45:54.362813 [NOTICE] switch_loadable_module.c:250 Adding Application 'disable_ec' 2010-02-20 16:45:54.362813 [NOTICE] switch_loadable_module.c:272 Adding API Function 'oz' +OK module unloaded +OK module loaded freeswitch@voyage> oz list +OK span: 1 (FXO1) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options 3way +OK span: 2 (FXO2) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options 3way +OK span: 3 (FXS1) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options none +OK span: 4 (FXS2) type: analog chan_count: 1 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options none Yet, when I lift the handset on port 1 or port 2 I don't get a dial tone :-( Instead I get this message: 2010-02-20 16:52:26.332813 [INFO] ozmod_zt.c:640 Setting echo cancel to 64 taps for 2:1 2010-02-20 16:52:26.332813 [ERR] zap_io.c:1599 I/O backend does not support command 24! Am I doing something wrong? -- Brian May <brian(a)microcomaustralia.com.au>

4 6

outbound calls
by Madovsky 21 Feb '10

21 Feb '10

Hello, I'm able to transcode a cal between 2 local legs, but when a local user call an oubound call, the call hangs up saying "not acceptable here", so it doesn't transcode. Any idea ? Thanks Franck

3 10

freeswitch.serial
by William Traenkle 21 Feb '10

21 Feb '10

A couple of quick questions: 1) what is the freeswitch.serial file under the &base_dir/conf directory? 2) can I change its location? Thanks, -Will

3 2

more than 1 profile for sofia/user ?
by Peter P GMX 21 Feb '10

21 Feb '10

Hello, in the standard setup - if a phone is registering to port 5060 - it is bound to the "internal" profile. And I can dial it via sofia/user/xxxx then. However due to NAT issues I would like to have to 2 seperate profiles for SIP phones. For example I have a "local" profile for all devices inside the LAN (e.g. Pattons und in future: local phones) and another "internal" profile which allows also external phones via external-xxx-ip. That way I would like to ensure that local phones have nothing to do with natted adresses and that external phones can register via external IPs. Question How do I manage that I can register a phone to the "local" profile and being able to dial that phone via sofia/user/xxxxx? Or do I think too complicated and there is simply nothing special to do? Best regards Peter

3 6

building for Lenny
by Brian May 21 Feb '10

21 Feb '10

Hello, What is the most recent instructions? According to <http://wiki.freeswitch.org/wiki/Installation_Guide>, I should install the freeswitch-sounds-music-8000 package, but no sounds packages are created in the build process. Thanks -- Brian May <brian(a)microcomaustralia.com.au>

6 10

LUA script providing dynamic directory information
by Maciej Bylica 20 Feb '10

20 Feb '10

Hello, I am trying to use mod_lua to provide dynamic directory information (binding in mod_lua.conf.xml) Here is my script. #!/usr/local/bin/lua -- load driver require "luasql.odbc" -- create environment object env = luasql.odbc(); -- connect to data source conn = env:connect("freeswitch","root"); -- reset our table if ( conn ~= nil ) then cur = conn:execute(string.format("SELECT email from VM where called_num='48112223344'")); if ( cur ~= nil ) then row = cur:fetch({}, "a"); if ( row ~= nil ) then freeswitch.consoleLog("info", " Email fetched from DB is = ".. row.email .."\n"); cur:close(); conn:close(); env:close(); mydialplan = [[ <?xml version="1.0" encoding="UTF-8" standalone="no"?> <document type="freeswitch/xml"> <section name="directory"> <domain name="10.10.10.1"> <user id="48112223344"> <params> <param name="vm-email-all-messages" value="true"/> <param name="vm-attach-file" value="true"/> <param name="vm-disk-quota" value="0"/> <param name="vm-email-all-messages" value="true"/> <param name="vm-mailto" value=".. row.email .."/> <param name="vm-keep-local-after-email" value="false"/> </params> </user> </domain> </section> </document> ]] XML_STRING = mydialplan end end end I've encountered a problem how to pass row.email gathered from DB directly to XML (vm-mailto). As you can see below configuration I have does not work properly. 2010-02-20 20:37:03.267071 [DEBUG] mod_voicemail.c:2358 Deliver VM to 48112223344(a)10.10.10.1 2010-02-20 20:37:03.276533 [INFO] switch_cpp.cpp:1129 Email fetched from DB is = hereis(a)MyEmaill.com 2010-02-20 20:37:03.435902 [DEBUG] switch_utils.c:631 Emailed file [/tmp/mail.1266694623f261] to [.. row.email ..] 2010-02-20 20:37:03.435902 [DEBUG] mod_voicemail.c:2526 Sending message to .. row.email .. I tried with: <param name="vm-mailto" value=.. row.email ../> <param name="vm-mailto" value="".. row.email ..""/> Both of them do not produce any "Sending message" output at all. Any thoughts? Thanks in advance. Maciej

2 2