December 2010 - FreeSWITCH-users - FreeSWITCH Mailing Lists

operator-extension in voicemail
by Madovsky 26 Dec '10

26 Dec '10

is operator-extension free to configure any extension transfer ? I'd like to us for example "9" while the voicemail is running to redirect in a conference extension Thanks Franck

1 0

condition weirdness
by Madovsky 26 Dec '10

26 Dec '10

If i call the number 000123456789@domain and in my dialplan I have something like ... <condition field="${sip_to_uri}" expression="^([1|51|758|597|868|598|58]\d{10,15})@$${domain}$"> ... in the log I can see condition passed... I'm confused

2 2

libg722_1: Cross Compilation of src/make_dct4_tables.c
by mazilo 26 Dec '10

26 Dec '10

I am facing a dilemma trying to cross-compile libg722_1 package from FreeSWITCH git version for an ARM5 platform. First of all, the compilation is fine up to a point to produce a cross-platform src/make_dct4_tables binary file. From there on, the compilation process tries to execute the newly produced (cross-compiled) src/make_dct4_tables binary file on the host to produce a src/dct4.h file that contains tables. This certainly will crash the compilation process because the src/make_dct4_tables binary file is for an ARM5 platform and not an x86 platform where the host is. I can manually compile the src/make_dct4_tables.c on the host to produce an x86 binary file and use it to manually generate the src/dct4.h file, but this poses a dilemma. Even though the src/dct4.h produced in this way will not have a problem to produce the libg722_1 codes to run/execute on an ARM5 platform, but it will probably not be able to correctly process the G722_1 audio streams. The reason is simply I suspect the src/dct4.h files generated by the src/make_dct4_tables binary file from both the x86 and ARM5 platforms are not identical. I hope experts here will be able to see this and come up with the solution. ----- don't and stop are the ONLY two 4-letter words considered offensive to men, but not when used together. -- View this message in context: http://freeswitch-users.2379917.n2.nabble.com/libg722-1-Cross-Compilation-o… Sent from the freeswitch-users mailing list archive at Nabble.com.

2 4

deactivate nibblebill in dialplan
by Madovsky 26 Dec '10

26 Dec '10

Is it possilbe to deactivate nibblebill in dialplan ? I'd like to allow the caller to reach the voice machine of the callee in case of the bridge fails and if his balance is under the nobal value in nibblebill.conf.xml <extension name="inbound"> <condition field="${sip_to_uri}" expression="^([2-9]\d{10,15})@$${domain}$"> <action application="set" data="hangup_after_bridge=true"/> <action inline="true" application="set" data="continue_on_fail=NORMAL_TEMPORARY_FAILURE,SUBSCRIBER_ABSENT,CALL_REJECTED,USER_NOT_REGISTERED,NO_ANSWER,NO_USER_RESPONSE,USER_BUSY"/> <action application="set" data="instant_ringback=true"/> <action application="ring_ready"/> <action inline="true" application="lcr" data="$1 default"/> <action inline="true" application="set" data="nibble_rate=0.01"/> <action application="export" data="originate_timeout=19"/> <action application="bridge" data="sofia/gateway/$1"/>  <action application="sleep" data="3000"/> <action application="answer"/> <action application="voicemail" data="default ${domain_name} ${dialed_extension}"/> </condition> </extension> Thanks -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

3 4

FreeSWITCH debs and rpms
by Michal Bielicki 26 Dec '10

26 Dec '10

debs and rpms are available from git builds from http://repo.freeswitch.de/ the files are kept for 14 days the centos rpms are build with sangoma libsng_isdn and libsng_ss7 as well as wanpipe. radius and openr2 are next on my list to be added. Michal Bielicki Geschäftsführer / CEO Seventh Signal Ltd. & Co. KG Weigandufer 45, Büro 115 D-12059 Berlin Voice: +49 30 60988730 Amtsgericht Berlin Charlottenburg HRA 44413 B, Ust.-ID: DE266981999 Geschäftsführer: Michal Bielicki Persönlich Haftende Gesellschafterin: Seventh Signal Ltd, 69 Great Hampton St. Birmingham, B18 6EW, GB, Company Nr.: 06889439 WWW.: http://www.seventhsignal.de

2 1

no invite send
by Sam 26 Dec '10

26 Dec '10

Hello friends, I am using the dialplan, <action application="bridge" data="sofia/external/12345(a)192.168.2.3"/> its not sending INVITE to the server 192.168.2.3 i am getting the below logs:- 2010-12-23 14:03:02.509500 [NOTICE] switch_channel.c:784 New Channel sofia/external/12345(a)192.168.2.3 [418e0dfa-0e6f-11e0-a5e1-33ac6c473a4e] 2010-12-23 14:03:02.509500 [DEBUG] mod_sofia.c:4052 (sofia/external/ 12345(a)192.168.2.3) State Change CS_NEW -> CS_INIT 2010-12-23 14:03:02.509500 [DEBUG] switch_core_session.c:1083 Send signal sofia/external/12345(a)192.168.2.3 [BREAK] 2010-12-23 14:03:02.510864 [DEBUG] switch_core_state_machine.c:320 (sofia/external/12345(a)192.168.2.3) Running State Change CS_INIT 2010-12-23 14:03:02.510864 [DEBUG] switch_core_state_machine.c:356 (sofia/external/12345(a)192.168.2.3) State INIT 2010-12-23 14:03:02.510864 [DEBUG] mod_sofia.c:86 sofia/external/ 12345(a)192.168.2.3 SOFIA INIT 2010-12-23 14:03:02.510864 [DEBUG] mod_sofia.c:126 (sofia/external/ 12345(a)192.168.2.3) State Change CS_INIT -> CS_ROUTING 2010-12-23 14:03:02.510864 [DEBUG] switch_core_session.c:1083 Send signal sofia/external/12345(a)192.168.2.3 [BREAK] 2010-12-23 14:03:02.510864 [DEBUG] switch_core_state_machine.c:356 (sofia/external/12345(a)192.168.2.3) State INIT going to sleep 2010-12-23 14:03:02.510864 [DEBUG] switch_core_state_machine.c:320 (sofia/external/12345(a)192.168.2.3) Running State Change CS_ROUTING 2010-12-23 14:03:02.510864 [DEBUG] switch_channel.c:1615 (sofia/external/ 12345(a)192.168.2.3) Callstate Change DOWN -> RINGING 2010-12-23 14:03:02.511888 [DEBUG] switch_core_state_machine.c:359 (sofia/external/12345(a)192.168.2.3) State ROUTING 2010-12-23 14:03:02.511888 [DEBUG] mod_sofia.c:149 sofia/external/ 12345(a)192.168.2.3 SOFIA ROUTING 2010-12-23 14:03:02.511888 [DEBUG] switch_ivr_originate.c:66 (sofia/external/12345(a)192.168.2.3) State Change CS_ROUTING -> CS_CONSUME_MEDIA 2010-12-23 14:03:02.511888 [DEBUG] switch_core_session.c:1083 Send signal sofia/external/12345(a)192.168.2.3 [BREAK] 2010-12-23 14:03:02.511888 [DEBUG] switch_core_state_machine.c:359 (sofia/external/12345(a)192.168.2.3) State ROUTING going to sleep 2010-12-23 14:03:02.511888 [DEBUG] switch_core_state_machine.c:320 (sofia/external/12345(a)192.168.2.3) Running State Change CS_CONSUME_MEDIA 2010-12-23 14:03:02.511888 [DEBUG] switch_core_state_machine.c:378 (sofia/external/12345(a)192.168.2.3) State CONSUME_MEDIA 2010-12-23 14:03:02.511888 [DEBUG] sofia.c:4606 Channel sofia/external/ 12345(a)192.168.2.3 entering state [calling][0] 2010-12-23 14:03:02.511888 [DEBUG] sofia.c:4606 Channel sofia/external/ 12345(a)192.168.2.3 entering state [terminated][503] 2010-12-23 14:03:02.511888 [DEBUG] switch_channel.c:2493 (sofia/external/ 12345(a)192.168.2.3) Callstate Change RINGING -> HANGUP 2010-12-23 14:03:02.511888 [NOTICE] sofia.c:5246 Hangup sofia/external/ 12345(a)192.168.2.3 [CS_CONSUME_MEDIA] [NORMAL_TEMPORARY_FAILURE] Regards Sam

4 10

hangup_after_bridge and failure_causes: what is wrong in my dialpan?
by Stephen Wilde 26 Dec '10

26 Dec '10

My dialplan is: <action application="set" data="failure_causes=NO_ROUTE_DESTINATION,NORMAL_CIRCUIT_CONGESTION,SWITCH_CONGESTION,NORMAL_TEMPORARY_FAILURE" /> <action application="set" data="hangup_after_bridge=true" /> <action application="limit_execute" data="hash outbound ${hash0} ${limit0} bridge ${dialstring0}" /> <action application="limit_execute" data="hash outbound ${hash1} ${limit1} bridge ${dialstring1}" /> <action application="limit_execute" data="hash outbound ${hash2} ${limit2} bridge ${dialstring2}" /> <action application="limit_execute" data="hash outbound ${hash3} ${limit3} bridge ${dialstring3}" /> <action application="limit_execute" data="hash outbound ${hash4} ${limit4} bridge ${dialstring4}" /> <action application="hangup" data="${bridge_hangup_cause}"/> What I expect is that the incoming call is hangup when the bridge fails for any reason except the reasons specified in "failure_causes", and in case the bridge fail for a reason specified in "failure_causes" the dialplan execution continues. My problem is that, for example, I see in my CDR that there is 1 inbound and 5 related outbound calls (one for each bridge in my dialplan) for NO_USER_RESPONSE, USER_BUSY, NORMAL_TEMPORARY_FAILURE, UNALLOCATED_NUMBER so the behaviour is different from what I expect: what is wrong in my dialplan?

1 0

Converting WAV to MP3 by LAME
by afshin afzali 26 Dec '10

26 Dec '10

Hi Guys, I want to use LAME to convert session recorded call logs to mp3 format in a Lua script. Is there a better way for this? BEST, -- afshin

3 3

Re: [Freeswitch-users] nibblebill schedule
by Madovsky 26 Dec '10

26 Dec '10

Or maybe a channel variable of cash amount of the account like nibblebill_cash before the bridge would be great ----- Original Message ----- From: Madovsky To: FreeSWITCH Users Help Sent: Saturday, December 25, 2010 12:16 PM Subject: Re: [Freeswitch-users] nibblebill schedule yes already thought also ;) and already set nibblebill hearbeat to 30s. but in fact the user is never in "trial" mode. it's in case that if he has less than nobal so he will always call for 30sec only. Or maybe make a real trial when he registers and once he bought his first prepaid I will remove it. ----- Original Message ----- From: Avi Marcus To: FreeSWITCH Users Help Sent: Saturday, December 25, 2010 11:47 AM Subject: Re: [Freeswitch-users] nibblebill schedule Hmm. Alternatively.. You could set a user-variable that shows they are on the trial. Then, before you set the price, you check for that variable and if it's true, you set, say, nibble_rate=.02 and make sure they start with a balance of .01 You probably need to change the heartbeat to 30 seconds to do that. Good luck :) On Sat, Dec 25, 2010 at 6:42 PM, Madovsky <infos(a)madovsky.org> wrote: yes I thought to this but it would be easier to do it through nibblebill ----- Original Message ----- From: Avi Marcus To: FreeSWITCH Users Help Sent: Saturday, December 25, 2010 11:30 AM Subject: Re: [Freeswitch-users] nibblebill schedule Call 30 seconds as a trial? Perhaps skip nibblebill and use: sched_hangup And count it somewhere that they used their trial period (using Mod_db with odbc or mod_odbc_query from git contrib) -Avi On Sat, Dec 25, 2010 at 6:22 PM, Madovsky <infos(a)madovsky.org> wrote: > ha ok, > the concept I thought is to let user to call 30s as a trial and > start niblebill after this time.... does it need to modify the > mod_nibblebill source code ? > > Thanks > F > > ----- Original Message ----- > From: Rupa Schomaker > To: FreeSWITCH Users Help > Sent: Saturday, December 25, 2010 8:38 AM > Subject: Re: [Freeswitch-users] nibblebill schedule > I don't see how without change. > You have no idea how fast the $$ is being nibbled away by other calls. So, > while you can account for a 30s buffer in the current call using the current > rate, the more calls that are up for that account the more "off" the 30s > estimate will be. > > On Fri, Dec 24, 2010 at 11:58 AM, Madovsky <infos(a)madovsky.org> wrote: >> >> Is it possible to schedule the transfer to nibblebill nobal_action ? >> I'd like to schedule of 30s before the call is cut and go to nobal_action >> extension >> >> thanks > > -- > -Rupa > > ________________________________ > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > ------------------------------------------------------------------------ _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ---------------------------------------------------------------------------- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

1 0

Loosing DTMF Digits in XML IVR
by afshin afzali 25 Dec '10

25 Dec '10

Hi Guys, After updating to latest freeswitch (git-34a0ca5 2010-12-22 20-38-57 -0600) , I've noticed that I'm loosing some of the dtmf digits in my IVR. Actually freeswitch looses most of them! My freeswitch hosted by ubuntu 10.04 64bit Server. Appreciate all comments, Regards, -- afshin

2 3