October 2010 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Accessing fax variables/status after rxfax/txfax
by Kristian Kielhofner 22 Oct '10

22 Oct '10

Hello everyone, Looking through the code it appears that txfax/rxfax automatically hangup channels when they're called and set a hangup cause that more or less makes sense depending on how the fax went. My question is - can I have them not hangup the channel automatically so I can continue execution somehow? Alternatively, can I somehow continue execution based on the hangup cause? I'm thinking something like api_hangup_hook that has access to the hangup/fax status. Thanks! -- Kristian Kielhofner http://www.astlinux.org http://blog.krisk.org http://www.star2star.com http://www.submityoursip.com http://www.voalte.com

3 3

FS disk thrashing after 1440 Auto-Adding Alias + segmentation fault
by Mario 22 Oct '10

22 Oct '10

Starting last night at 2am (it had been up for 10 hours) FS issued: 1440 Auto-Adding Alias [208.2.3.4] for profile [internal]. Now, when I start FS I get the message right away and heavy disk thrashing. For the last couple of weeks while working on FS this messages never came up (that I noticed). The machine goes to 100 percent processor and the disk thrashes. I removed all external SIP accounts and the ip-v6 profile to test and it still happens. This came out of the blue and stopped everything I was working on. Looking into this all I could find was it may be related to UPnP which the router has. Had been working fine until now. Any help greatly appreciated. Mario When I issue the shutdown command FS end with an error: 2010-10-05 10:22:44.889143 [CONSOLE] switch_loadable_module.c:1401 mod_siren has no shutdown routine 2010-10-05 10:22:44.889167 [NOTICE] switch_loadable_module.c:518 Deleting Codec SPEEX 99 Speex 32000hz 20ms 2010-10-05 10:22:44.889213 [NOTICE] switch_loadable_module.c:518 Deleting Codec SPEEX 99 Speex 16000hz 20ms 2010-10-05 10:22:44.889257 [NOTICE] switch_loadable_module.c:518 Deleting Codec SPEEX 99 Speex 8000hz 20ms 2010-10-05 10:22:44.889330 [CONSOLE] switch_loadable_module.c:1401 mod_speex has no shutdown routine Segmentation fault (core dumped) Name Type Data State ================================================================================================= 210.17.234.127 alias internal ALIASED internal profile sip:mod_sofia@100.24.1.37:5060 RUNNING (0) external profile sip:mod_sofia@100.24.1.37:5080 RUNNING (0) 100.24.1.37 alias internal ALIASED ================================================================================================= 2 profiles 2 aliases

5 5

extension in use
by covici＠ccs.covici.com 22 Oct '10

22 Oct '10

Is there any variable or function so I can see if an extension is in use before dialing? What I want to do is implement call waiting control or maybe other things. Thanks. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici(a)ccs.covici.com

3 3

unable to compile fscomm
by Juan Backson 22 Oct '10

22 Oct '10

Hello I am having difficulty compiling fscomm. Can someone please help me out? How can I resolve these compilation errors? Makefile:682: warning: ignoring old commands for target `debugtools/moc_statedebugdialog.cpp' g++ -c -pipe -Wall -W -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m64 -mtune=generic -DQT_NO_DEBUG -DQT_SHARED -DQT_THREAD_SUPPORT -I/usr/lib64/qt-3.3/mkspecs/default -I. -I../src/include -I../libs/apr/include -I../libs/libteletone/src -I/usr/lib64/qt-3.3/include -o main.o main.cpp main.cpp:30:30: error: QtGui/QApplication: No such file or directory main.cpp:31:25: error: QSplashScreen: No such file or directory In file included from main.cpp:32: mainwindow.h:34:23: error: QMainWindow: No such file or directory mainwindow.h:35:28: error: QTableWidgetItem: No such file or directory mainwindow.h:36:25: error: QSignalMapper: No such file or directory mainwindow.h:37:27: error: QSystemTrayIcon: No such file or directory In file included from mainwindow.h:39, from main.cpp:32: ./fshost.h:32:19: error: QThread: No such file or directory ./fshost.h:33:18: error: QColor: No such file or directory ./fshost.h:34:17: error: QHash: No such file or directory ./fshost.h:35:26: error: QSharedPointer: No such file or directory In file included from ./fshost.h:37, from mainwindow.h:39, from main.cpp:32: ./call.h:32:18: error: QtCore: No such file or directory ./call.h:33:19: error: QString: No such file or directory In file included from ./fscomm.h:5, from ./fshost.h:40, from mainwindow.h:39, from main.cpp:32: ./isettings.h:4:19: error: QObject: No such file or directory ./isettings.h:5:17: error: QtXml: No such file or directory In file included from mainwindow.h:42, from main.cpp:32: preferences/prefdialog.h:4:19: error: QDialog: No such file or directory preferences/prefdialog.h:5:24: error: QDomDocument: No such file or directory In file included from mainwindow.h:43, from main.cpp:32: debugtools/consolewindow.h:4:17: error: QtGui: No such file or directory In file included from debugtools/consolewindow.h:6, from mainwindow.h:43, from main.cpp:32: debugtools/sortfilterproxymodel.h:41:33: error: QSortFilterProxyModel: No such file or directory debugtools/sortfilterproxymodel.h:42:31: error: QAbstractTableModel: No such file or directory debugtools/sortfilterproxymodel.h:43:19: error: QVector: No such file or directory debugtools/sortfilterproxymodel.h:44:17: error: QList: No such file or directory ../src/include/switch_utils.h:379: warning: unused parameter ‘number’ ./channel.h:10: error: expected `)' before ‘uuid’ ./channel.h:11: error: ‘QString’ does not name a type ./channel.h:12: error: ‘QString’ has not been declared ./channel.h:13: error: ‘QString’ does not name a type ./channel.h:14: error: ‘QString’ has not been declared ./channel.h:15: error: ‘QString’ does not name a type ./channel.h:16: error: ‘QString’ has not been declared ./channel.h:17: error: ‘QString’ does not name a type ./channel.h:22: error: ‘qulonglong’ has not been declared ./channel.h:23: error: ‘qulonglong’ does not name a type ./channel.h:24: error: ‘qulonglong’ has not been declared ./channel.h:25: error: ‘qulonglong’ does not name a type ./channel.h:26: error: ‘qulonglong’ has not been declared ./channel.h:27: error: ‘qulonglong’ does not name a type ./channel.h:30: error: ‘QString’ does not name a type ./channel.h:31: error: ‘QString’ does not name a type ./channel.h:32: error: ‘QString’ does not name a type ./channel.h:33: error: ‘QString’ does not name a type ./channel.h:35: error: ‘qulonglong’ does not name a type ./channel.h:36: error: ‘qulonglong’ does not name a type ./channel.h:37: error: ‘qulonglong’ does not name a type ./channel.h: In member function ‘void Channel::setCidName(int)’: ./channel.h:12: error: ‘_cidName’ was not declared in this scope ./channel.h: In member function ‘void Channel::setCidNumber(int)’: ./channel.h:14: error: ‘_cidNumber’ was not declared in this scope ./channel.h: In member function ‘void Channel::setDestinatinonNumber(int)’: ./channel.h:16: error: ‘_destinationNumber’ was not declared in this scope ./channel.h: In member function ‘void Channel::setProgressEpoch(int)’: ./channel.h:22: error: ‘_progressEpoch’ was not declared in this scope ./channel.h: In member function ‘void Channel::setProgressMediaEpoch(int)’: ./channel.h:24: error: ‘_progressMediaEpoch’ was not declared in this scope ./channel.h: In member function ‘void Channel::setCreatedEpoch(int)’: ./channel.h:26: error: ‘_createdEpoch’ was not declared in this scope ./call.h: At global scope: ./call.h:37: error: expected constructor, destructor, or type conversion before ‘typedef’ ./call.h:43: error: expected constructor, destructor, or type conversion before ‘;’ token ./call.h:54: error: ‘QString’ does not name a type ./call.h:55: error: ‘QString’ does not name a type ./call.h:56: error: ‘QString’ does not name a type ./call.h:58: error: ‘QSharedPointer’ has not been declared ./call.h:58: error: expected ‘,’ or ‘...’ before ‘<’ token ./call.h:59: error: ISO C++ forbids declaration of ‘QSharedPointer’ with no type ./call.h:59: error: expected ‘;’ before ‘<’ token ./call.h:60: error: expected `;' before ‘void’ ./call.h:60: error: ‘QSharedPointer’ has not been declared ./call.h:60: error: expected ‘,’ or ‘...’ before ‘<’ token ./call.h:61: error: ISO C++ forbids declaration of ‘QSharedPointer’ with no type ./call.h:61: error: expected ‘;’ before ‘<’ token ./call.h:63: error: expected `;' before ‘QString’ ./call.h:63: error: ‘QString’ does not name a type ./call.h:64: error: ‘QString’ does not name a type ./call.h:68: error: ‘fscomm_call_state_t’ does not name a type ./call.h:69: error: ‘fscomm_call_state_t’ has not been declared ./call.h:70: error: ‘QString’ has not been declared ./call.h:71: error: ‘QString’ does not name a type ./call.h:76: error: ‘QString’ has not been declared ./call.h:77: error: ‘qulonglong’ has not been declared ./call.h:78: error: ‘QTime’ does not name a type ./call.h:83: error: ISO C++ forbids declaration of ‘QSharedPointer’ with no type ./call.h:83: error: expected ‘;’ before ‘<’ token ./call.h:84: error: ISO C++ forbids declaration of ‘QSharedPointer’ with no type ./call.h:84: error: expected ‘;’ before ‘<’ token ./call.h:86: error: ‘QString’ does not name a type ./call.h:90: error: ‘QString’ does not name a type ./call.h:91: error: ‘fscomm_call_state_t’ does not name a type ./call.h:92: error: ‘qulonglong’ does not name a type ./call.h: In member function ‘void Call::setChannel(int)’: ./call.h:58: error: ‘_channel’ was not declared in this scope ./call.h:58: error: ‘channel’ was not declared in this scope ./call.h: In member function ‘void Call::setOtherLegChannel(int)’: ./call.h:60: error: ‘_otherLegChannel’ was not declared in this scope ./call.h:60: error: ‘channel’ was not declared in this scope ./call.h: In member function ‘int Call::getCallID()’: ./call.h:66: error: ‘_channel’ was not declared in this scope ./call.h: In member function ‘void Call::setState(int)’: ./call.h:69: error: ‘_state’ was not declared in this scope ./call.h: In member function ‘void Call::setCause(int)’: ./call.h:70: error: ‘_cause’ was not declared in this scope ./call.h:70: error: ‘qDebug’ was not declared in this scope ./call.h: In member function ‘void Call::setAnsweredEpoch(int)’: ./call.h:77: error: ‘_answeredEpoch’ was not declared in this scope ./account.h: At global scope: ./account.h:7: error: expected constructor, destructor, or type conversion before ‘class’ make: *** [main.o] Error 1

3 2

record_session with fifo stops after transfer
by Yuriy Ivzhenko 22 Oct '10

22 Oct '10

I route incoming calls to fifo. And i want to record all conversation of incoming caller. I call record_session just before fifo. All works, but if the fifo agent transfer the call to another extension, record stops in a transfer point. uuid_record give the same results. If i call record_session after transfer (on A-leg) - nothing recordings, If i call record_session after transfer (on B-leg) - recording works, but this is not-so-good decision. I want to record all A-leg conversation. Is this possible, or i do not understand something? <extension name="ffCallCenter"> <condition field="destination_number" expression="^ffCallCenter$"/> <condition field="${fifo(list)}" expression='<fifo name="fifo_CallCenter_WP@default[\s\S]*<member[\s\S] */fifo>[\s\S]*<fifo name="manual_calls'> <action application="answer"/> <action application="record_session" data="$${base_dir}/recordings/${strftime(%Y-%m-%d-%H-%M-%S)}_${destination _number}_${caller_id_number}.wav"/>  <action application="set" data="fifo_orbit_exten=ffGirls:17"/> <action application="set" data="fifo_orbit_dialplan=XML"/> <action application="set" data="fifo_orbit_context=default"/> <action application="set" data="fifo_caller_exit_key=#"/> <action application="set" data="fifo_caller_exit_to_orbit=true"/> <action application="fifo" data="fifo_CallCenter_WP@default in undef local_stream://moh"/> </condition> </extension>

1 0

Binding to external IP address during system boot
by Jason White 22 Oct '10

22 Oct '10

I am running FreeSWITCH under Debian, with ppp0 (an ADSL connection) as the external interface. Often, FreeSWITCH successfully starts and binds to the (dynamically assigned) external IPv4 address during the system boot process. Sometimes, however, this fails and I get (from sofia status profile external): sip:mod_sofia@127.0.0.1:5080 Clearly, it has bound to the loopback interface. Restarting the sip profile doesn't fix it, but restarting FreeSWITCH does. Is there a command that I can place in a networking script that will force the binding to be dropped and a new binding to be created, without restarting FreeSWITCH entirely?

3 4

Simultaneous calls / sound / resources
by Malay Thakershi 22 Oct '10

22 Oct '10

Hello all, I have few questions about resources when there are multiple in / out calls going on in FS. 1. I use Cepstral. If I have 20 calls at the same time, does playing media (from FS) suffer performance issues due to Cepstral licensing. I just have 1 server Cepstral license. 2. There is no sound card on my server (Windows 2008 Standard). Does functioning of FS media modules / Cepstral suffer because of lack of sound card? If I install high quality sound device, is it going to make the voice quality better? 3. How do I make sure FS process has enough resources (processor / memory) when other taxing tasks are going on the server (e.g. backup)? I have noticed voice getting broken when someone calls when backup is going on. Thank you so much for guidance / help.

5 9

mod_dingaling node error
by budi wibowo 21 Oct '10

21 Oct '10

dear all i try to install mod_dingaling following the wiki guide. client.xml <profile type="client"> <param name="name" value="gmail.com"/> <param name="login" value="xxx(a)gmail.com/gtalk"/> <param name="password" value="xxxpass"/> <param name="server" value="talk.google.com"/> <param name="dialplan" value="XML"/> <param name="message" value="FreeSwitch (The Future of Telephony)"/> <param name="rtp-ip" value="auto"/>  <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> <param name="auto-login" value="true"/> <param name="auto-reply" value="Press *Call* to join my conference"/> <param name="sasl" value="plain"/> <param name="tls" value="true"/> <param name="use-rtp-timer" value="true"/> <param name="exten" value="1000"/> </profile> in dialplan i add <extension name="gmail.com"> <condition field="destination_number" expression="^50(1\d{10})$"> <action application="set" data="hangup_after_bridge=true"/> <action application="bridge" data="dingaling/ gmail.com/+$1@voice.google.com"/> </condition> </extension> </include> after i load mod_dingaling i got this error 2010-10-22 07:21:45.483898 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:45.720897 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:45.956898 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:47.427901 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:50.147899 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:52.861897 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:53.097897 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:53.333896 [ERR] libdingaling.c:1205 NODE ERROR! 2010-10-22 07:21:53.560897 [ERR] libdingaling.c:1205 NODE ERROR! have been trying to google but no luck related with that error. any help is appreciated, and i use the git version regards budi

1 0

problem in default dialplan extension 869
by covici＠ccs.covici.com 21 Oct '10

21 Oct '10

Maybe I am not understanding this, but if I look at the extension for call return, it has the following: <action application="transfer" data="${hash(select/${domain_name}-call_return/${caller_id_number})}"/> whereas the insert statement when the extension is called has /${dialed_extension} after the call-return. So what can I put in the select to retrieve the correct number? Thanks for any suggestion. -- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici(a)ccs.covici.com

2 2

G.729 & Windows
by Thomas Mueller 21 Oct '10

21 Oct '10

hi I'm reading "Mac OSX and Windows systems will be supported soon" in blog post "G.729 Codec Licenses Now Available For FreeSWITCH!" (http://freeswitch.org/node/249) from 04/01/2010 - 23:34. Searching/googling about G.729 and freeswitch did not reveal any news about G.729 on Windows. Is there any estimate about when it will be available for Windows? - Thomas -- müller it gmbh, kanzleistrasse 126, 8004 zürich

7 10