August 2009 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Language of the speech
by Rudolf Denert 03 Aug '09

03 Aug '09

Hi again, does anybody know why my freeswitch doesn't play German speech-files? Here is my construct: I'm generating a random number in my lua script: rand = math.random(11, 1000); The I want that the freeswitch says the "random number": session:execute("say", "de name_spelled iterated " ..test_nummer); It works fine in English but I don't bring the freeswitch to say the number in german. I installed the freeswitch-lang-de_1.0.3-1_i386.deb, change the line in freeswitch.xml: <section name="phrases" description="Speech Phrase Management"> <macros> <X-PRE-PROCESS cmd="include" data="lang/de/*.xml"/> </macros> </section> Here is an extraction from the fs_cli: 2009-07-31 16:23:47 [DEBUG] switch_core_state_machine.c:152 switch_core_standard_on_execute() sofia/external/anonymous(a)anonymous.invalid Execute set(default_language=de) 2009-07-31 16:23:47 [DEBUG] mod_dptools.c:711 set_function() sofia/external/anonymous(a)anonymous.invalid SET [default_language]=[de] But I don't here any German speech only the English on Does anybody of you have an idea? Thanks a lot again. Best regards -- -- Rudolf Denert, Technical Support TNG AG, NGN Projensdorfer Str. 324, D-24106 Kiel, Germany phone: +49 431 7097-10, fax: +49 431 7097-555 mailto: rdenert(a)tng.de http://www.tng.de - Register: Amtsgericht Kiel, HRB 6596 KI Supervisory board (Aufsichtsrat): Stefan Scheuermann (Vorsitz) Executive board (Vorstand): Dr. Sven Willert (Vorsitz), Dr. Thomas Rohwer, Sven Schade, Carsten Tolkmit, Dr.-Ing. Volkmar Hausberg Tax-Id (Steuernr.): 1929112637, VAT-Id (USt-Id): DE225201428 - This e-mail may contain confidential and/or privileged information. If you are not the intended recipient (or have received this e-mail in error) please notify the sender immediately and destroy this e-mail. Any unauthorized copying, disclosure or distribution of the material in this e-mail is strictly forbidden. Diese E-Mail enthält vertrauliche und/oder rechtlich geschuetzte Informationen. Wenn Sie nicht der richtige Adressat sind oder diese E-Mail irrtümlich erhalten haben, informieren Sie bitte sofort den Absender und vernichten Sie diese Mail. Das unerlaubte Kopieren sowie die unbefugte Weitergabe dieser Mail ist nicht gestattet.

3 4

Re: [Freeswitch-users] Outbound Proxy
by Darren Williams 02 Aug '09

02 Aug '09

and/or outbound proxy, I do not seem to be able to find this parameter. It is probably my terminology which is confusing too and what exactly I want to do. All I know is that on my Thomson ST2030. If I enter: Registrar Server Address: bmnha-01.bt.com Proxy Server Address: bmnha-01.bt.com Outbound Proxy Server:www.bbvservice-560129.bt.com Everything works fine, I would just like to be able to transfer this config to freeswitch. From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West Sent: 02 August 2009 09:34 To: freeswitch-users(a)lists.freeswitch.org Subject: Re: [Freeswitch-users] Outbound Proxy Fill out proxy... with the fake hostname... then fill out register-proxy and/or outbound-proxy. /b On Aug 1, 2009, at 1:57 PM, Darin Weeks wrote: Have you looked over various example configurations on the wiki? see: SIP Provider Examples I'm a bit confused by your questions... to make voip calls work, you basically need to register/authenticate with proxies/gateways to send and receive calls through them. Sounds like you need to find out from your provider's documentation as to how they expect you to connect with them. Why are you trying to connect to the host behind the proxy rather than the proxy? On Sat, Aug 1, 2009 at 3:53 AM, Darren Williams <darren(a)dmmhosting.co.uk> wrote: I am considering using freeswitch and would like to know if this is possible. The provider I use has a host that sits behind an OpenSER proxy. The hostname cannot get resolved by DNS on the internet. Using freeswitch, at the moment, I am getting a DNS failure message for the host. Is there a way of registering to this host and making calls through it by making all traffic go through the outbound proxy? TIA __________ Information from ESET NOD32 Antivirus, version of virus signature database 4297 (20090801) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 4297 (20090801) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

2 1

Configuring Sangoma U100
by Merul Patel 02 Aug '09

02 Aug '09

I'm new to FS, and experimenting with it on a constrained environment (PCEngines ALIX board running Voyage Linux 0.62). So far, FS has compiled fine, and I can register multiple softphones and make calls between them, but I'm lost at how to configure a Sangoma U100 so I can make and receive calls over an analogue line. I've installed the wanpipe drivers (3.5.4) from Sangoma, and the wanrouter utility detects the USB device, and I've compiled it to support the TDM API. FS was compiled with the Openzap module - as best as I can tell. I thought that I would be able to use the wancfg_tdmapi utility to configure the /etc/wanpipe/wanpipe1.conf and then use the generated configuration file as the basis for configuring autoload_configs/ openzap.conf.xml. However, the wancfg utility doesn't generate the wanpipe1.conf, and I'm stumped. Any pointers would be much appreciated. Best regards, Merul

2 1

Bridging a call to an extension on another PBX.
by Adam Wilt 02 Aug '09

02 Aug '09

Hello, I'm trying to conference-in a call from FreeSWITCH to an extension on another PBX using sip. According to the documentation, I think it should look like this: conference abc@default dial {sip_auth_username=myuser,sip_auth_password=mypassword}sofia/external/ 101(a)1.2.3.4 where 1.2.3.4 is the ip address of the remote pbx, and 101 is the extension. I've tried adding a gateway for it in the sip profiles, and then doing this: conference abc@default dial sofia/mygateway/701 Both of these methods give me a result of: Call Requested: result: [DESTINATION_OUT_OF_ORDER] I set-up my soft phone to register to the same ip address with the same credentials, and it allows me to call the extension properly. Can somebody please tell me what I'm doing wrong? Thanks, Adam

2 1

H248 support
by mark morreny 02 Aug '09

02 Aug '09

Hi, Someone told me to check here. I am looking for a H248 supported gateway. Does freeswitch support H248 or is there anyway to make it supportable in freeSWITCH? Thanks, Mark

2 1

Outbound Proxy
by Darren Williams 02 Aug '09

02 Aug '09

I am considering using freeswitch and would like to know if this is possible. The provider I use has a host that sits behind an OpenSER proxy. The hostname cannot get resolved by DNS on the internet. Using freeswitch, at the moment, I am getting a DNS failure message for the host. Is there a way of registering to this host and making calls through it by making all traffic go through the outbound proxy? TIA __________ Information from ESET NOD32 Antivirus, version of virus signature database 4292 (20090730) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com

3 2

LUA: Independent control of each call leg.
by peely 01 Aug '09

01 Aug '09

Hi, I'm trying to develop an application using lua and need to control the inbound and outbound legs independently, even when they are switched together. I can initiate the outbound session but I can't seem to bridge without losing control of the script. For example, if I use: local api = freeswitch.API(); inSession = session; inSession:answer(); inSession:setAutoHangup(false); egSession = freeswitch.Session("sofia/default/mynum(a)mydomain.com"); egSession:setAutoHangup(false); if egSession:ready() then api:execute("uuid_bridge",inSession.uuid .. " " .. egSession.uuid); end while egSession:ready() do inSession:sleep(1000); end Then I lose the script entirely, and if I use: inSession:execute("bridge", "sofia/default/mynum(a)mydomain.com") Then I lose the ability to control the call whilst the outbound is in progress. Does anyone know a way I can allow ingress to egress calling whilst still maintaining script control mid-call? I also need to ingress to hear provisional speech during outbound connect. I've looked at conferencing but there seems to be quite a lot of automated messaging. Thanks, Neil. -- View this message in context: http://www.nabble.com/LUA%3A-Independent-control-of-each-call-leg.-tp247440… Sent from the Freeswitch-users mailing list archive at Nabble.com.

4 4

if using centos you should read this
by Saji Honey 01 Aug '09

01 Aug '09

If you are using centOS for your Freeswitch installation, you should probable read the article on planet.centos.org and the www.centos.org <http://www.centos.org/> the open letter to "Lance Davis" one of the founders of centOS. CONFIDENTIAL NOTICE : If you have received this email in error, please immediately notify the sender by email at the address shown above. This email may contain confidential or legally privileged information that is intended only for the use of the individual or entity named in this email. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or reliance upon the contents of this email is strictly prohibited. Please delete from your files if you are not the intended recipient. Thank you for your compliance.

5 6

Connect to PostgreSQL database
by Thangappan.M 01 Aug '09

01 Aug '09

Dear all, I installed postgresql database in my machine. So now I need to connect the database from freeswitch.When I searched about the site.They told , to load the mod_lcr module. I followed the following steps. * Edit the modules.conf file and uncommented the applications/mod_lcr line * make mod_lcr-install * edit /usr/local/freeswitch/conf/autoload_configs/modules.conf.xml and uncomment the mod_lcr line. * Reload the freeswitch Where I made a mistake? Tell the steps to connect the postreSQL database. -- Regards, Thangappan.M

3 3

ODBC problem
by Thangappan.M 01 Aug '09

01 Aug '09

While installing mod_lcr I got the following problem. freeswitch@debian> load mod_lcr API CALL [load(mod_lcr)] output: -ERR [module load file routine returned an error] freeswitch@debian> 2009-08-01 18:12:15 [INFO] mod_lcr.c:522 lcr_load_config() odbc_dsn is 192.168.1.222:freeswitch:freeswitch 2009-08-01 18:12:15 [INFO] mod_lcr.c:536 lcr_load_config() dsn is "192.168.1.222", user is "freeswitch", and password is "freeswitch" 2009-08-01 18:12:15 [ERR] switch_odbc.c:164 switch_odbc_handle_connect() STATE: IM002 CODE 0 ERROR: [unixODBC][Driver Manager]Data source name not found, and no default driver specified 2009-08-01 18:12:15 [CRIT] mod_lcr.c:546 lcr_load_config() Cannot Open ODBC Database! 2009-08-01 18:12:15 [ERR] mod_lcr.c:985 mod_lcr_load() Unable to load lcr config file 2009-08-01 18:12:15 [CRIT] switch_loadable_module.c:839 switch_loadable_module_load_file() Error Loading module /usr/local/freeswitch/mod/mod_lcr.so **Module load routine returned an error** What could the error? How can I resolve it? -- Regards, Thangappan.M

2 1