January 2009 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Re: [Freeswitch-users] Can I have FS send a 503?
by Anthony Minessale 26 Jan '09

26 Jan '09

We use the standard rfc q.850 to sip cause code map so you can set continue_on_fail=true and hangup with the q.850 that maps to 503 (I forgot what it is atm) On Jan 25, 2009 12:09 PM, "Ron McCarthy" <ronmccar(a)gmail.com> wrote: Hi, Is it possible to have FS send a 503 / no route found error back? I have looked and have not seen a place where you can add a custom sip response code like this. I want to return a 503 if they can't call that destination, instead of a 404 basically. Any help would be great, thanks! _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

6 7

PortAudio not closing audio device properly after hangup?
by Jason White 26 Jan '09

26 Jan '09

Under revision 11484, if I make a call using PortAudio: pa call <extension> then hang up the call: pa hangup and after that, try to access the same audio device with other software, I get a "device or resource busy" error. This is using Alsa under Debian Sid, kernel 2.6.26. Shutting down FreeSWITCH fixes this. This is also a regression compared with the earlier version of FreeSWITCH that I was running before doing the latest build. It seems to me that the device isn't being closed as it should be when the last call hangs up.

3 6

Can I have FS send a 503?
by Ron McCarthy 25 Jan '09

25 Jan '09

Hi, Is it possible to have FS send a 503 / no route found error back? I have looked and have not seen a place where you can add a custom sip response code like this. I want to return a 503 if they can't call that destination, instead of a 404 basically. Any help would be great, thanks!

1 0

OBDC.numRows() always returning -1 when records returned from db.
by mszlazak＠aol.com 25 Jan '09

25 Jan '09

I haven't seen obdc.numRows() come up in this list but I can't get anything but -1 even though I get records from the database.

1 0

Gateway Ping
by Laurent Fabre 24 Jan '09

24 Jan '09

Hi, I activated the ping option on one of my gateway and I receive that kind of message : nta: sent OPTIONS (110269468) to udp/91.121.129.17:5060 nta: received 501 Not Implemented for OPTIONS (110269468) Does that mean the ping is working ? :) Regards, -- Laurent FABRE Directeur général 10, rue d'Aumale 75009 Paris Tel: +33.(0)1.42.81.28.20<sip:+33142812820> Mob: +33.(0)6.75.75.02.96<sip:+33675750296> Fax: +33.(0)1.70.24.74.61<+33170247461> laurent.fabre(a)kirranet.com

2 1

My fs_cli stopped working, can you help me please?
by Milena 24 Jan '09

24 Jan '09

Hi, thanks for the reply, I tried it both with fs down and it didn't work, also when it was turned on, no results either. Any other ideas please? i really wanna fix it without having to start from zero. thank you very much On the Freeswitch console i keep getting the message: 2009-01-24 10:03:23 [DEBUG] mod_event_socket.c:1791 listener_run() Connection Open from 127.0.0.1:54741 2009-01-24 10:03:23 [DEBUG] mod_event_socket.c:1914 listener_run() Session complete, waiting for children 2009-01-24 10:03:23 [DEBUG] mod_event_socket.c:1938 listener_run() Connection Closed This is what i did in the other console: -bash-3.2# cd /usr/src/freeswitch-1.0.2/libs/esl/ -bash-3.2# make clean rm -f *.o src/*.o testclient testserver fs_cli libesl.a *~ src/*~ src/include/*~ -bash-3.2# make cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl.c -o src/esl.o cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl_event.c -o src/esl_event.o cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl_threadmutex.c -o src/esl_threadmutex.o cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes -c src/esl_config.c -o src/esl_config.o ar rcs libesl.a src/esl.o src/esl_event.o src/esl_threadmutex.o src/esl_config.o ranlib libesl.a cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes fs_cli.c -o fs_cli -L. -L../../libs/libedit/src/.libs -lncurses -lpthread -lesl -ledit cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes testclient.c -o testclient -L. -lncurses -lpthread -lesl cc -Isrc/include -DHAVE_EDITLINE -g -ggdb -I../../libs/libedit/src/ -O2 -ffast-math -Wall -Werror -Wunused-variable -Wwrite-strings -Wstrict-prototypes -Wmissing-prototypes testserver.c -o testserver -L. -lncurses -lpthread -lesl -bash-3.2# ./fs_cli -bash-3.2#

2 1

Auto dialing ...
by Shelby Ramsey 24 Jan '09

24 Jan '09

OK ... Here goes another I'm doing this with AST ... but I want to move it to FS. Searched via google site:lists.freeswitch.org auto dialer and others ... nothing useful. Today I have a platform for auto dialing with AST (centrally managed ... about 10 machines) and we do this: -- Remote machines query central DB for numbers to call based on certain configs -- Use AMI to generate the call -- If call gets answered, extension info queried via rta (central db again) The nice thing about all of this is it's relatively easy to manage (through one central web interface we built) and it works ... the bad part is reporting ... as anyone knows on this list that has used AST for auto dialing in this way (via .call or AMI) every call looks like it fails instead of showing a real cause code. So ... conceptually I'm trying to accomplish the same thing ... Today we use FS a lot for termination of VoIP traffic ... all done via XML_CURL ... which is awesome! Would like to do something like: -- originate request -- on answer XML_CURL posts info

6 6

Re: [Freeswitch-users] My fs_cli stopped working, can you help me please?
by Milena 24 Jan '09

24 Jan '09

Well, telnet works, what else could it be? another thing i remember doing before the fs_cli stopped working was installing TCAPI and getting it to work, but i didn't change any config files or anything other than what it says in the instalation instructions; I don't mind so much about replicating the issue and figuring out how did it get damaged, what I really want to know now is how to make it work again cause even reconfiguring/installing fs doesn't fix it and the truth is, the fs_cli is comfortable; any idea on how to fix it other than starting a fresh install of fs from a new os instalation? Thank you! My telnet output: -bash-3.2# telnet localhost 8021 Trying 127.0.0.1... Connected to localhost.localdomain (127.0.0.1). Escape character is '^]'. Content-Type: auth/request auth <my password> Content-Type: command/reply Reply-Text: +OK accepted exit Content-Type: command/reply Reply-Text: +OK bye Content-Type: text/disconnect-notice Content-Length: 70 Disconnected, goodbye! See you at ClueCon http://www.cluecon.com/ !!! Connection closed by foreign host. ------- *Michael Collins wrote:* just for kicks, can you try a raw telnet session, just to make sure the the event socket is working properly? telnet localhost 8021 auth ClueCon (press enter twice) If you get something like this: h-3.2# telnet localhost 8021 Trying ::1... telnet: connect to address ::1: Connection refused Trying fe80::1... telnet: connect to address fe80::1: Connection refused Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. Content-Type: auth/request auth ClueCon Content-Type: command/reply Reply-Text: +OK accepted Then the event socket stuff is working. To exit out, type "exit" then enter twice. Let us know what happens. -MC On Fri, Jan 23, 2009 at 2:14 PM, Milena <testeador01 at gmail.com <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users>> wrote: >* *>* I use the stable version of fs 1.0.2 testing out different options of *>* configuration; *>* Last thing I was doing was trying to fix some issues with dingaling-google *>* talk cause i hear no audio at all from an external ip, and i still didnt get *>* it to work; *>* *>* so i tried deleting the sofia_* files on the folder db/ as suggested on *>* another thread about nat related issues (oops?), and then restarting fs. *>* After this, trying to execute bin/fs_cli doesn't work anymore; it tries to *>* connect cause i get the output on the box: *>* 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1791 listener_run() *>* Connection Open from 127.0.0.1:33055 *>* 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1914 listener_run() Session *>* complete, waiting for children *>* 2009-01-23 16:23:59 [DEBUG] mod_event_socket.c:1938 listener_run() *>* Connection Closed *>* *>* but on the console where im trying to run the cli nothing happens, *>* I tried rebooting the machine; i tried with freeswitch make current, it *>* didn't fix it; i tried all the way from configure to make and make install *>* and it didn't fix my problem either. *>* *>* What should i run or change on the configurations to fix this? *>* *>* Thank you very much. *>* *>* _______________________________________________ *>* Freeswitch-users mailing list *>* Freeswitch-users at lists.freeswitch.org <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> *>* http://lists.freeswitch.org/mailman/listinfo/freeswitch-users *>* UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users *>* http://www.freeswitch.org *>* *>* *

2 1

How to bridge without Answer?
by shehzad p 24 Jan '09

24 Jan '09

Hi all, When I dial a number from Originator Gateway, It will route to Freeswitch Server and then FS will bridge the call to Terminator Gateway as below. Terminator Answer the call (and runs playback, and look for DTMF). |Originator Gateway|---------------> |FreeSwitch |------------------> |Terminator Gateway| I used bridge application to route call to Terminator. But my requirement is that when Terminator answer the call (Respnd with 200OK) , Freeswitch should NOT Answer call for A leg (Originater Gateway). How can be this done? Thanks in advance. msp. -- View this message in context: http://www.nabble.com/How-to-bridge-without-Answer--tp21583334p21583334.html Sent from the Freeswitch-users mailing list archive at Nabble.com.

3 6

Freeswitch latest revision ODBC crashed
by Laurent Fabre 24 Jan '09

24 Jan '09

Hi, I'm experiencing a few « random » segfaults ever since I enabled core ODBC support. They usually happen during startup or quickly after...or not at all as long as I do not restart freeswitch. The backend is a postgresql 7.4, every module has a distinct database (LATIN9, with OIDS). I'm having a few issues with presence & call routing which tend to break from time to time. The freeswitch box is hosted and I've got several phones with STUN enabled behind a NAT firewall (namely pfSense). I'm not sure how those things might relate but maybe it's worth mentionning. I've decided to update a few hours ago but still crashing. I was about to test mod_easyroute when I decided to run gdb and look into it : http://pastebin.freeswitch.org/6830 Could someone please help me pointing the issue? :) Thanks in advance, -- Laurent FABRE Directeur général 10, rue d'Aumale 75009 Paris Tel: +33.(0)1.42.81.28.20<sip:+33142812820> Mob: +33.(0)6.75.75.02.96<sip:+33675750296> Fax: +33.(0)1.70.24.74.61<+33170247461> laurent.fabre(a)kirranet.com

6 11