January 2009 - FreeSWITCH-users - FreeSWITCH Mailing Lists

OpenZAP parse error [-3012] [Q931E_INVALID_CRV]
by Peter P GMX 19 Jan '09

19 Jan '09

After a time I receive the following error when a call comes in on our OpenZap span 2: parse error [-3012] [Q931E_INVALID_CRV] Here's the log 2009-01-14 13:14:11 [DEBUG] ozmod_isdn.c:320 zap_isdn_931_34() Yay I got an event! Type:[4d] Size:[103] CRV: 23 (0x17, CTX: Originator) 2009-01-14 13:14:11 [DEBUG] ozmod_isdn.c:352 zap_isdn_931_34() zchan 0 (-1:-1) source isdn_data->channels_remote_crv[0x17] 2009-01-14 13:14:11 [CRIT] ozmod_isdn.c:446 zap_isdn_931_34() Received Release with no matching channel 0 2009-01-14 13:14:11 [DEBUG] ozmod_isdn.c:781 zap_isdn_921_23() 931 parse error [-3012] [Q931E_INVALID_CRV] 2009-01-14 13:14:15 [DEBUG] ozmod_isdn.c:777 zap_isdn_921_23() READ 5 -------------------------------------------------------------------------------- When freeswitch is restarted or mod_openzap is reloaded, the error is gone away. Any idea what this can be? Best regards Peter

4 12

OpenZap detect tones question
by Scott Ellis 19 Jan '09

19 Jan '09

Quick question, when specifying a "detect-busy" tone in the tones.conf file - is the cadence used? (The US examples to not have cadence) In the tests I have does it does not seem to be. This is a problem in Australia, as we have managed to have our busy tone 425Hz, 375ms on 375ms off, also in our dial tone 400+425+450. So when I go to dial a call, I often get the Zap channel hanging up again as it thinks the line is busy. Scott

2 3

[FS-es] Spanish Freeswitch community
by Andrés Martín - martyn 19 Jan '09

19 Jan '09

Hi. I think that is a good idea expan the freeswitch project arround the wolrd, btw this site is specially to hispan community [1], and the irc channel is #freeswitch-es :D. [1] http://www.freeswitch.es Regards. -- Andrés Martín Ochoa; passport: andresmartin(a)linuxmail.org; Linux Registered User #436420; Asterisk User Number: 1000; PBX: (57) 1 578 20 30; Ext: 106

2 1

Problem with digium te220p
by Krzysztof Zimnicki 19 Jan '09

19 Jan '09

Hi, We would like to configure our digium te220p card with freeswitch. Configured OpenZap and install zaptel drivers, but card doesn't work with our freeswitch. When freeswitch start put error on console: 2009-01-17 19:41:06 [NOTICE] zap_io.c:2517 zap_global_init() Modules configured: 1 2009-01-17 19:41:06 [INFO] zap_io.c:2341 zap_load_module() Loading IO from /usr/local/freeswitch/mod/ozmod_zt.so 2009-01-17 19:41:06 [INFO] zap_io.c:2127 load_config() auto-loaded 'zt' 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:38 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 2 as OpenZAP device 1:2 fd:39 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 3 as OpenZAP device 1:3 fd:40 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 1:4 fd:41 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 5 as OpenZAP device 1:5 fd:42 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 6 as OpenZAP device 1:6 fd:43 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 7 as OpenZAP device 1:7 fd:44 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 8 as OpenZAP device 1:8 fd:45 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 9 as OpenZAP device 1:9 fd:46 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 10 as OpenZAP device 1:10 fd:47 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 11 as OpenZAP device 1:11 fd:48 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 12 as OpenZAP device 1:12 fd:49 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 13 as OpenZAP device 1:13 fd:50 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 14 as OpenZAP device 1:14 fd:51 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 15 as OpenZAP device 1:15 fd:52 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 16 as OpenZAP device 1:16 fd:53 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 17 as OpenZAP device 1:17 fd:54 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 18 as OpenZAP device 1:18 fd:55 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 19 as OpenZAP device 1:19 fd:56 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 20 as OpenZAP device 1:20 fd:57 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 21 as OpenZAP device 1:21 fd:58 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 22 as OpenZAP device 1:22 fd:59 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 23 as OpenZAP device 1:23 fd:60 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 24 as OpenZAP device 1:24 fd:61 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 25 as OpenZAP device 1:25 fd:62 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 26 as OpenZAP device 1:26 fd:63 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 27 as OpenZAP device 1:27 fd:64 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 28 as OpenZAP device 1:28 fd:65 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 29 as OpenZAP device 1:29 fd:66 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 30 as OpenZAP device 1:30 fd:67 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 31 as OpenZAP device 1:31 fd:68 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 32 as OpenZAP device 2:1 fd:69 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 33 as OpenZAP device 2:2 fd:70 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 34 as OpenZAP device 2:3 fd:71 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 35 as OpenZAP device 2:4 fd:72 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 36 as OpenZAP device 2:5 fd:73 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 37 as OpenZAP device 2:6 fd:74 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 38 as OpenZAP device 2:7 fd:75 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 39 as OpenZAP device 2:8 fd:76 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 40 as OpenZAP device 2:9 fd:77 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 41 as OpenZAP device 2:10 fd:78 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 42 as OpenZAP device 2:11 fd:79 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 43 as OpenZAP device 2:12 fd:80 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 44 as OpenZAP device 2:13 fd:81 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 45 as OpenZAP device 2:14 fd:82 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 46 as OpenZAP device 2:15 fd:83 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 47 as OpenZAP device 2:16 fd:84 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 48 as OpenZAP device 2:17 fd:85 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 49 as OpenZAP device 2:18 fd:86 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 50 as OpenZAP device 2:19 fd:87 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 51 as OpenZAP device 2:20 fd:88 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 52 as OpenZAP device 2:21 fd:89 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 53 as OpenZAP device 2:22 fd:90 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 54 as OpenZAP device 2:23 fd:91 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 55 as OpenZAP device 2:24 fd:92 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 56 as OpenZAP device 2:25 fd:93 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 57 as OpenZAP device 2:26 fd:94 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 58 as OpenZAP device 2:27 fd:95 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 59 as OpenZAP device 2:28 fd:96 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 60 as OpenZAP device 2:29 fd:97 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 61 as OpenZAP device 2:30 fd:98 2009-01-17 19:41:06 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 62 as OpenZAP device 2:31 fd:99 2009-01-17 19:41:06 [INFO] zap_io.c:2265 load_config() Configured 62 channel(s) 2009-01-17 19:41:06 [INFO] zap_io.c:2358 zap_load_module() Loading SIG from /usr/local/freeswitch/mod/ozmod_analog.so 2009-01-17 19:41:06 [INFO] zap_io.c:2474 zap_configure_span() auto-loaded 'analog' 2009-01-17 19:41:06 [ERR] mod_openzap.c:1895 load_config() Error finding OpenZAP span id: name:PRI_1 2009-01-17 19:41:06 [ERR] mod_openzap.c:1895 load_config() Error finding OpenZAP span id: name:PRI_2 2009-01-17 19:41:06 [CONSOLE] switch_loadable_module.c:857 switch_loadable_module_load_file() Successfully Loaded [mod_openzap] 2009-01-17 19:41:06 [NOTICE] switch_loadable_module.c:141 switch_loadable_module_process() Adding Endpoint 'openzap' openzap.conf.xml: <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/>    </settings> <pri_spans>  <param name="q921loglevel" value="alert"/> <param name="q931loglevel" value="alert"/> <param name="mode" value="user"/> <param name="dialect" value="dms"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="q921loglevel" value="alert"/> <param name="q931loglevel" value="alert"/> <param name="mode" value="user"/> <param name="dialect" value="national"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> </pri_spans>  <analog_spans>    <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="enable-callerid" value="true"/>     </analog_spans> </configuration> zaptel.conf: span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 span = 2,0,0,ccs,hdb3,crc4 bchan = 32-46,48-62 dchan = 47 loadzone = ru defaultzone=ru freeswitch.log: 2009-01-17 18:26:57 [DEBUG] zap_config.c:56 zap_config_open_file() Configuration file is /usr/local/freeswitch/conf/modules.conf. 2009-01-17 18:26:57 [NOTICE] zap_io.c:2517 zap_global_init() Modules configured: 1 2009-01-17 18:26:57 [DEBUG] zap_config.c:56 zap_config_open_file() Configuration file is /usr/local/freeswitch/conf/openzap.conf. 2009-01-17 18:26:57 [DEBUG] zap_io.c:2110 load_config() found config for span 2009-01-17 18:26:57 [INFO] zap_io.c:2341 zap_load_module() Loading IO from /usr/local/freeswitch/mod/ozmod_wanpipe.so 2009-01-17 18:26:57 [DEBUG] zap_config.c:56 zap_config_open_file() Configuration file is /usr/local/freeswitch/conf/wanpipe.conf. 2009-01-17 18:26:57 [INFO] zap_io.c:2127 load_config() auto-loaded 'wanpipe' 2009-01-17 18:26:57 [DEBUG] zap_io.c:2163 load_config() created span 1 (span1) of type wanpipe 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 1 [name]=[OpenZAP] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 1 [number]=[1] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 1 [fxs-channel]=[1:3-4] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2216 load_config() setting trunk type to 'FXS' start(KEWL) 2009-01-17 18:26:57 [ERR] ozmod_wanpipe.c:440 wp_open_range() failure configuring device s1c3 2009-01-17 18:26:57 [ERR] ozmod_wanpipe.c:440 wp_open_range() failure configuring device s1c4 2009-01-17 18:26:57 [DEBUG] zap_io.c:2110 load_config() found config for span 2009-01-17 18:26:57 [DEBUG] zap_io.c:2163 load_config() created span 2 (span2) of type wanpipe 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 2 [fxo-channel]=[1:1-2] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2205 load_config() setting trunk type to 'FXO' start(KEWL) 2009-01-17 18:26:57 [ERR] ozmod_wanpipe.c:440 wp_open_range() failure configuring device s1c1 2009-01-17 18:26:57 [ERR] ozmod_wanpipe.c:440 wp_open_range() failure configuring device s1c2 2009-01-17 18:26:57 [DEBUG] zap_io.c:2110 load_config() found config for span 2009-01-17 18:26:57 [INFO] zap_io.c:2341 zap_load_module() Loading IO from /usr/local/freeswitch/mod/ozmod_zt.so 2009-01-17 18:26:57 [DEBUG] zap_config.c:56 zap_config_open_file() Configuration file is /usr/local/freeswitch/conf/zt.conf. 2009-01-17 18:26:57 [INFO] zap_io.c:2127 load_config() auto-loaded 'zt' 2009-01-17 18:26:57 [DEBUG] zap_io.c:2163 load_config() created span 3 (span3) of type zt 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 3 [name]=[OpenZAP] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 3 [number]=[2] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 3 [fxs-channel]=[1] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2216 load_config() setting trunk type to 'FXS' start(KEWL) 2009-01-17 18:26:57 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 3:1 fd:40 2009-01-17 18:26:57 [DEBUG] zap_io.c:2110 load_config() found config for span 2009-01-17 18:26:57 [DEBUG] zap_io.c:2163 load_config() created span 4 (span4) of type zt 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 4 [name]=[OpenZAP] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 4 [number]=[2] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2176 load_config() span 4 [fxo-channel]=[3] 2009-01-17 18:26:57 [DEBUG] zap_io.c:2205 load_config() setting trunk type to 'FXO' start(KEWL) 2009-01-17 18:26:57 [INFO] ozmod_zt.c:186 zt_open_range() configuring device /dev/zap/channel channel 3 as OpenZAP device 4:1 fd:41 2009-01-17 18:26:57 [INFO] zap_io.c:2265 load_config() Configured 2 channel(s) 2009-01-17 18:26:57 [INFO] zap_io.c:2358 zap_load_module() Loading SIG from /usr/local/freeswitch/mod/ozmod_analog.so 2009-01-17 18:26:57 [INFO] zap_io.c:2474 zap_configure_span() auto-loaded 'analog' 2009-01-17 18:26:57 [DEBUG] zap_config.c:56 zap_config_open_file() Configuration file is /usr/local/freeswitch/conf/tones.conf. 2009-01-17 18:26:57 [DEBUG] zap_io.c:411 zap_span_load_tones() added tone generation [dial] = [v=-7;%(1000,0,350,440)] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [dial] = [350,440] 2009-01-17 18:26:57 [DEBUG] zap_io.c:411 zap_span_load_tones() added tone generation [ring] = [v=-7;%(2000,4000,440,480)] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [ring] = [440,480] 2009-01-17 18:26:57 [DEBUG] zap_io.c:411 zap_span_load_tones() added tone generation [busy] = [v=-7;%(500,500,480,620)] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [busy] = [480,620] 2009-01-17 18:26:57 [DEBUG] zap_io.c:411 zap_span_load_tones() added tone generation [attn] = [v=0;%(100,100,1400,2060,2450,2600)] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [attn] = [1400,2060,2450,2600] 2009-01-17 18:26:57 [DEBUG] zap_io.c:411 zap_span_load_tones() added tone generation [callwaiting-sas] = [v=0;%(300,0,440)] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [callwaiting-sas] = [440] 2009-01-17 18:26:57 [DEBUG] zap_io.c:411 zap_span_load_tones() added tone generation [callwaiting-cas] = [v=0;%(80,0,2750,2130)] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [callwaiting-cas] = [2750,2130] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [fail1] = [913.8] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [fail2] = [1370.6] 2009-01-17 18:26:57 [DEBUG] zap_io.c:409 zap_span_load_tones() added tone detect [fail3] = [776.7] 2009-01-17 18:26:57 [ERR] mod_openzap.c:1895 load_config() Error finding OpenZAP span id: name:PRI_1 2009-01-17 18:26:57 [ERR] mod_openzap.c:1895 load_config() Error finding OpenZAP span id: name:PRI_2 2009-01-17 18:26:57 [NOTICE] switch_loadable_module.c:141 switch_loadable_module_process() Adding Endpoint 'openzap' 2009-01-17 18:26:57 [NOTICE] switch_loadable_module.c:239 switch_loadable_module_process() Adding Application 'disable_ec' 2009-01-17 18:26:57 [NOTICE] switch_loadable_module.c:259 switch_loadable_module_process() Adding API Function 'oz' 2009-01-17 18:26:57 [DEBUG] ozmod_analog.c:875 zap_analog_run() ANALOG thread starting. freeswitch command line: freeswitch@voipgw> oz list API CALL [oz(list)] output: +OK span: 1 (span1) type: analog chan_count: 31 dialplan: XML context: default dial_regex: fail_dial_regex: hold_music: analog_options none freeswitch@voipgw> oz dump 1 1 API CALL [oz(dump 1 1)] output: span_id: 1 chan_id: 1 physical_span_id: 1 physical_chan_id: 1 type: B state: DOWN last_state: DOWN cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE Any idee where is the problem ?

2 1

strange 503 error thrown by freeswitch
by Juan Backson 19 Jan '09

19 Jan '09

Hi, I am running a test for a set of 290 calls to be fired to freeswitch once every second. The console logs show the following for one of those 290 calls. Could someone please help me out to fix this problem? What could be causing this? I recalled being able to run thousands of calls without any error with an older release. 2009-01-19 13:07:19 [DEBUG] switch_ivr_play_say.c:1222 switch_ivr_play_file() done playing file 2009-01-19 13:07:19 [DEBUG] switch_core_state_machine.c:152 switch_core_standard_on_execute() sofia/internal/10286@192.168.1.122:7001Execute hangup() 2009-01-19 13:07:19 [NOTICE] mod_dptools.c:566 hangup_function() Hangup sofia/internal/10286@192.168.1.122:7001 [CS_EXECUTE] [NORMAL_CLEARING] 2009-01-19 13:07:19 [DEBUG] switch_channel.c:1494 switch_channel_perform_hangup() Send signal sofia/internal/ 10286@192.168.1.122:7001 [KILL] 2009-01-19 13:07:19 [DEBUG] switch_core_session.c:806 switch_core_session_signal_state_change() Send signal sofia/internal/ 10286@192.168.1.122:7001 [BREAK] 2009-01-19 13:07:19 [DEBUG] switch_core_state_machine.c:442 switch_core_session_run() (sofia/internal/10286@192.168.1.122:7001) State EXECUTE going to sleep 2009-01-19 13:07:19 [DEBUG] switch_core_state_machine.c:369 switch_core_session_run() (sofia/internal/10286@192.168.1.122:7001) Running State Change CS_HANGUP 2009-01-19 13:07:19 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (sofia/internal/10286@192.168.1.122:7001) State HANGUP 2009-01-19 13:07:19 [DEBUG] mod_sofia.c:253 sofia_on_hangup() sofia/internal/10286@192.168.1.122:7001 Overriding SIP cause 480 with 503 from the other leg 2009-01-19 13:07:19 [DEBUG] mod_sofia.c:287 sofia_on_hangup() Channel sofia/internal/10286@192.168.1.122:7001 hanging up, cause: NORMAL_CLEARING 2009-01-19 13:07:19 [DEBUG] mod_sofia.c:361 sofia_on_hangup() Responding to INVITE with: 503 2009-01-19 13:07:20 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() sofia/internal/10286@192.168.1.122:7001Standard HANGUP, cause: NORMAL_CLEARING 2009-01-19 13:07:20 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (sofia/internal/10286@192.168.1.122:7001) State HANGUP going to sleep 2009-01-19 13:07:20 [DEBUG] switch_core_session.c:938 switch_core_session_thread() Session 575 (sofia/internal/ 10286@192.168.1.122:7001) Locked, Waiting on external entities 2009-01-19 13:07:20 [NOTICE] switch_core_session.c:956 switch_core_session_thread() Session 575 (sofia/internal/ 10286@192.168.1.122:7001) Ended 2009-01-19 13:07:20 [NOTICE] switch_core_session.c:958 switch_core_session_thread() Close Channel sofia/internal/ 10286@192.168.1.122:7001 [CS_HANGUP] freeswitch returns 503 U 192.168.1.116:5070 -> 192.168.1.122:5060 SIP/2.0 503 Service Unavailable. Via: SIP/2.0/UDP 192.168.1.122;branch=z9hG4bK27f5.22865cc6.0. Via: SIP/2.0/UDP 192.168.1.103:7001. From: 10286 <sip:10286@192.168.1.122:7001>;tag=287. To: 0010286 <sip:0010286@192.168.1.122 <sip%3A0010286(a)192.168.1.122> >;tag=pSHaHm69m41Xa. Call-ID: 287-23175(a)192.168.1.103. CSeq: 2 INVITE. User-Agent: YHT Media Gateway. Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, PRACK, MESSAGE, SUBSCRIBE, NOTIFY, REFER, UPDATE, REGISTER, INFO, PUBLISH. Supported: timer, precondition, path, replaces. Allow-Events: talk, presence, dialog, call-info, sla, include-session-description, presence.winfo, message-summary, refer. Reason: Q.850;cause=16;text="NORMAL_CLEARING". Content-Length: 0.

2 4

Dialling from a conferance
by Sias Mey 19 Jan '09

19 Jan '09

Hi, I am building a call handleing framework that uses freeswitch for CRM like activities. To this end I an actually trying to use conferances for meeting points between diffirent parties. I would like to be able to add/drop poeple from the calls at will and with great flexibility (hence freeswitch). I have only one question whith implemeting all this (and that is a huge up to the FS dev for keeping the API constant accross seperate interfaces) Is it possible to play ringing into the conferance while using the conferance dial command to make a new call? I was thinking that I would like the one party to be ready and waiting in the conferance and then dial out from there. However by default it seems that there would be almost no feedback to the party in the conferance about what is happening. It has been a while since I last tested this, but I am busy doing an svn up in the background as I type this (South African bandwidth makes it take a while) and I havent seen anything that could be related in any of the documentation I have read. Thanks in advance.

2 2

enforcing codec in gateway (or call) level
by Apostolos Pantsiopoulos 19 Jan '09

19 Jan '09

I am using xml_curl to create my dialplans on the fly. I want to be able to use deferent codec preferences on each call (depending on various conditions i.e. gateway,destination etc.) I understand that I have to set inbound-late-negotiation=true in my profile in order for the dialplan to be processed before the codec negotiation. The only thing that I cannot figure out is how to "tell" FS to use a specific codec (or series of codecs) before bridging a call. Which app do I use or which variable do I set (without of course changing any global variable or profile's "codec-prefs" variable)? -- ------------------------------------------- Apostolos Pantsiopoulos Kinetix Tele.com R & D email: regs(a)kinetix.gr -------------------------------------------

1 1

Re: [Freeswitch-users] mod_opal first unsuccessful test
by Apostolos Pantsiopoulos 19 Jan '09

19 Jan '09

Sorry. I am attaching it know Robert Jongbloed wrote: > > Um, there is nothing attached .... > > > > Robert Jongbloed > > OPAL/OpenH323/PTLib Architect and Co-founder. > > > > *From:* Apostolos Pantsiopoulos [mailto:regs@kinetix.gr] > *Sent:* Friday, 16 January 2009 9:33 PM > *To:* Robert Jongbloed; freeswitch-users(a)lists.freeswitch.org > *Subject:* Re: [Freeswitch-users] mod_opal first unsuccessful test > > > > Any news regarding this issue? > > Apostolos Pantsiopoulos wrote: > > I am attaching the wireshark capture. Openphone is on xxx.xxx.xxx.202 and > FS is on xxx.xxx.xxx.212 > > Robert Jongbloed wrote: > > Can you send me a WireShark capture? > > > > Robert Jongbloed > > OPAL/OpenH323/PTLib Architect and Co-founder. > > > > *From:* Apostolos Pantsiopoulos [mailto:regs@kinetix.gr] > *Sent:* Tuesday, 13 January 2009 11:05 PM > *To:* freeswitch-users(a)lists.freeswitch.org > <mailto:freeswitch-users@lists.freeswitch.org> > *Cc:* Robert Jongbloed > *Subject:* Re: [Freeswitch-users] mod_opal first unsuccessful test > > > > I also tried using Ekiga - which is OPAL based - and got the same > behavior. No audio - although I can see RTP packets. > > Apostolos Pantsiopoulos wrote: > > Hi, > > Yes, openPhone is working with my soundcard. I am using it > every day for testing purposes. I use the 1.8.1 version. Is there a newer > version that uses OPAL? I didn't know that. Where can I get it from? > > Robert Jongbloed wrote: > > Hi guys, > > > > I was using the OpenPhone that you build with OPAL for my testing. So > that is identical (I think) to you. > > > > I have not (yet) do any third party client testing. > > > > Two ALERTING messages are fine, perfectly legal and OPAL can handle it. > > > > You say you can see the RTP packets flowing so that implies that the > mod_opal is actually working, so let's look somewhere else. Have you > confirmed that OpenPhone is using the sound card correctly? Made a > call between two machines JUST using OpenPhone for example? > > > > > > Robert Jongbloed > > OPAL/OpenH323/PTLib Architect and Co-founder. > > > > *From:* Anthony Minessale [mailto:anthony.minessale@gmail.com] > *Sent:* Tuesday, 13 January 2009 6:20 AM > *To:* Robert Jongbloed > *Subject:* Fwd: [Freeswitch-users] mod_opal first unsuccessful test > > > > Heh, > what client are you using in your tests that are working? > > > > ---------- Forwarded message ---------- > From: *Apostolos Pantsiopoulos* <regs(a)kinetix.gr <mailto:regs@kinetix.gr>> > Date: Mon, Jan 12, 2009 at 9:51 AM > Subject: [Freeswitch-users] mod_opal first unsuccessful test > To: freeswitch-users(a)lists.freeswitch.org > <mailto:freeswitch-users@lists.freeswitch.org> > > > Hi, > > I successfully compiled mod_opal using the latest svn for both opal > and ptlib as Brian suggested. > > When I try to establish a call using h323 from my openphone client > I get no audio although I can see RTP packets in both directions when I am > doing a capture. Some details : > > I am using the 11094 revision of the FS trunk. > I am using the PCMU codec. > I tried dialing the default IVR (5000) and other testing extensions > (freeswitch conference, echo test etc.) > I tried using fast start on and off , h245 tunneling on and off, h245 in > SETUP on and off. > > In my captures I have also noticed a strange behavior : FS sends to > my client 2 "alerting" packets > for no apparent reason. Could this be a cause of the problem? > > Had anyone any success with mod_opal lately? If yes, could you > please reply quoting your config > options (both on FS and on your client)? > > > -- > ------------------------------------------- > Apostolos Pantsiopoulos > Kinetix Tele.com R & D > email: regs(a)kinetix.gr <mailto:regs@kinetix.gr> > ------------------------------------------- > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > <mailto:Freeswitch-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > > -- > Anthony Minessale II > > FreeSWITCH http://www.freeswitch.org/ > ClueCon http://www.cluecon.com/ > > AIM: anthm > MSN:anthony_minessale@hotmail.com > <mailto:MSN%3Aanthony_minessale@hotmail.com> > GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com > <mailto:PAYPAL%3Aanthony.minessale@gmail.com> > IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch > > FreeSWITCH Developer Conference > sip:888@conference.freeswitch.org > <mailto:sip%3A888@conference.freeswitch.org> > iax:guest@conference.freeswitch.org/888 > <http://iax:guest@conference.freeswitch.org/888> > googletalk:conf+888@conference.freeswitch.org > <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> > pstn:213-799-1400 > > > > > > -- > ------------------------------------------- > Apostolos Pantsiopoulos > Kinetix Tele.com R & D > email: regs(a)kinetix.gr <mailto:regs@kinetix.gr> > ------------------------------------------- > > ------------------------------------------------------------------------ > > > > > > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org <mailto:Freeswitch-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > > > > -- > ------------------------------------------- > Apostolos Pantsiopoulos > Kinetix Tele.com R & D > email: regs(a)kinetix.gr <mailto:regs@kinetix.gr> > ------------------------------------------- > > > > > -- > ------------------------------------------- > Apostolos Pantsiopoulos > Kinetix Tele.com R & D > email: regs(a)kinetix.gr <mailto:regs@kinetix.gr> > ------------------------------------------- > > > > > -- > ------------------------------------------- > Apostolos Pantsiopoulos > Kinetix Tele.com R & D > email: regs(a)kinetix.gr <mailto:regs@kinetix.gr> > ------------------------------------------- -- ------------------------------------------- Apostolos Pantsiopoulos Kinetix Tele.com R & D email: regs(a)kinetix.gr -------------------------------------------

2 1

Outbound call - choose profile
by Apostolos Pantsiopoulos 19 Jan '09

19 Jan '09

When I am using the following method to place a call from the dialplan : sofia/gateway/<gateway>/<number_to_dial> how do I tell FS which profile to use (as in the sofia/<profile>/<extension> method?) I am asking that because all my calls to my declared <gateways> use the 5080 port, and I want them to use the 5060 port. Is there a way to configure a <gateway> to use a specific profile when making outbound calls? -- ------------------------------------------- Apostolos Pantsiopoulos Kinetix Tele.com R & D email: regs(a)kinetix.gr -------------------------------------------

4 6

Re: [Freeswitch-users] Dialing Out Problem via Gateway
by Alberto Ceccarelli 19 Jan '09

19 Jan '09

Hi, I've the same problem. I've create the log with only the problem (the log is in attach). One gateway (messagenet.it) and two internal account (1002 and 1008). My dialplan: <include> <extension name="messagenet.it"> <condition field="destination_number" expression="^(5300000)$"> <action application="set" data="domain_name=$${domain}"/> <action application="transfer" data="1008 XML default"/> </condition> </extension> </include> My Sip Profile: <include> <gateway name="messagenet.it"> <param name="username" value="5300000"/> <param name="realm" value="sip.messagenet.it"/> <param name="from-domain" value="sip.messagenet.it"/> <param name="password" value="password"/> <param name="register" value="true"/> <param name="retry-seconds" value="30"/> </gateway> </include> My freeswith is runnig on Windows Server 2003 with 2 NIC (1 interna 192.168.0.15 and 1 external 10.0.3.6 (212.001.001.001)) For privacy I've change my IP and my phone number. -- Alby

2 2