July 2008 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Periodic FXO hangup failures
by John Wehle 03 Jul '08

03 Jul '08

We recently purchased a Sangoma A200DX with 2 FXO modules which we are using with freeswitch running on FreeBSD 6.3. Every so often at the end of a call freeswitch reports that it has hung up the line, however the PBX still reports the line off-hook. The PBX still reports the line off-hook even after rebooting the PC. If I connect an analog telephone to the line from the PBX, pick up the phone, and hang it up then the PBX will report that the line is back on hook. It's as if freeswitch and / or the A200DX forgets to signal the hangup to the PBX. I've emailed Sangoma however thought to post it here in case it rings a bell. -- John ------------------------------------------------------------------------- | Feith Systems | Voice: 1-215-646-8000 | Email: john(a)feith.com | | John Wehle | Fax: 1-215-540-5495 | | -------------------------------------------------------------------------

1 0

Re: [Freeswitch-users] Problems with Nokia E51 registration (Alex Kinch)
by Steven Brown 03 Jul '08

03 Jul '08

I've posted some settings for the N95 on the wiki http://wiki.freeswitch.org/wiki/Nokia_N95_Settings Steve ________________________________ From: freeswitch-users-bounces(a)lists.freeswitch.org on behalf of freeswitch-users-request(a)lists.freeswitch.org Sent: Thu 03/07/2008 17:00 To: freeswitch-users(a)lists.freeswitch.org Subject: Freeswitch-users Digest, Vol 25, Issue 11 Send Freeswitch-users mailing list submissions to freeswitch-users(a)lists.freeswitch.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-users or, via email, send a message with subject or body 'help' to freeswitch-users-request(a)lists.freeswitch.org You can reach the person managing the list at freeswitch-users-owner(a)lists.freeswitch.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeswitch-users digest..." Today's Topics: 1. Re: Problems with Nokia E51 registration (Alex Kinch) ---------------------------------------------------------------------- Message: 1 Date: Thu, 3 Jul 2008 16:59:16 +0100 From: Alex Kinch <alex(a)alexkinch.com> Subject: Re: [Freeswitch-users] Problems with Nokia E51 registration To: freeswitch-users(a)lists.freeswitch.org Message-ID: <138E2558-1839-44BC-88DA-25947634F44A(a)alexkinch.com> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Not wishing to do the AOL-style 'me too' waving hand thing, but I'd be interested in hearing from someone who's managed this. My N95 steadfastly refuses to play ball with FS. Alex On 3 Jul 2008, at 11:23, jussi.salonen(a)huittislainen.com wrote: > > Hey, > I can't register my Nokia E51 with FS. I have default settings after > installing > FS (username:1000 passw:1234). I have x-lite on my laptop and it > works just > fine over my wlan with FS. > E51 is in same wlan and I can use that normally for web browsing > etc. so I > really think there is something wrong in my settings. > If some of you have same phone or same kind of problems please let > me know? > > > ---------------------------------------------------------------- > This mail sent through L-secure: http://www.l-secure.net/ > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org <http://www.freeswitch.org/> ------------------------------ _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org <http://www.freeswitch.org/> End of Freeswitch-users Digest, Vol 25, Issue 11 ************************************************

1 0

Re: [Freeswitch-users] openzap / dialplan / Sangoma A204 questions
by John Wehle 03 Jul '08

03 Jul '08

> Can you open an Jira on this so we don't loose track of > it.. http://jira.freeswitch.org I took a look, however I don't see openzap listed there ... do you want filed under endpoint modules? BTW: Here's the build error: src/zap_ss7_boost.c: In function `zap_ss7_boost_run': src/zap_ss7_boost.c:849: error: syntax error before "rfds" src/zap_ss7_boost.c:864: warning: implicit declaration of function `FD_ZERO' src/zap_ss7_boost.c:864: error: `rfds' undeclared (first use in this function) src/zap_ss7_boost.c:864: error: (Each undeclared identifier is reported only once src/zap_ss7_boost.c:864: error: for each function it appears in.) src/zap_ss7_boost.c:865: error: `efds' undeclared (first use in this function) src/zap_ss7_boost.c:866: warning: implicit declaration of function `FD_SET' src/zap_ss7_boost.c:873: warning: implicit declaration of function `select' src/zap_ss7_boost.c:878: warning: implicit declaration of function `FD_ISSET' make: *** [src/zap_ss7_boost.o] Error 1 -- John ------------------------------------------------------------------------- | Feith Systems | Voice: 1-215-646-8000 | Email: john(a)feith.com | | John Wehle | Fax: 1-215-540-5495 | | -------------------------------------------------------------------------

2 1

Re: [Freeswitch-users] Problems with Nokia E51 registration (Alex Kinch)
by Steven Brown 03 Jul '08

03 Jul '08

It does work I have used an N95 with FS via WLAN previously without any problems (other than shocking battery life on the N95 ! ), I'm out the office for a day or so but once I get back will grab hold of the phone and confirm the settings used, I'll try and pop them on the wiki over the weekend Steve -----Original Message----- From: freeswitch-users-bounces(a)lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of freeswitch-users-request(a)lists.freeswitch.org Sent: 03 July 2008 17:00 To: freeswitch-users(a)lists.freeswitch.org Subject: Freeswitch-users Digest, Vol 25, Issue 11 Send Freeswitch-users mailing list submissions to freeswitch-users(a)lists.freeswitch.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.freeswitch.org/mailman/listinfo/freeswitch-users or, via email, send a message with subject or body 'help' to freeswitch-users-request(a)lists.freeswitch.org You can reach the person managing the list at freeswitch-users-owner(a)lists.freeswitch.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeswitch-users digest..." Today's Topics: 1. Re: Problems with Nokia E51 registration (Alex Kinch) ---------------------------------------------------------------------- Message: 1 Date: Thu, 3 Jul 2008 16:59:16 +0100 From: Alex Kinch <alex(a)alexkinch.com> Subject: Re: [Freeswitch-users] Problems with Nokia E51 registration To: freeswitch-users(a)lists.freeswitch.org Message-ID: <138E2558-1839-44BC-88DA-25947634F44A(a)alexkinch.com> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes Not wishing to do the AOL-style 'me too' waving hand thing, but I'd be interested in hearing from someone who's managed this. My N95 steadfastly refuses to play ball with FS. Alex On 3 Jul 2008, at 11:23, jussi.salonen(a)huittislainen.com wrote: > > Hey, > I can't register my Nokia E51 with FS. I have default settings after > installing FS (username:1000 passw:1234). I have x-lite on my laptop > and it works just fine over my wlan with FS. > E51 is in same wlan and I can use that normally for web browsing etc. > so I really think there is something wrong in my settings. > If some of you have same phone or same kind of problems please let me > know? > > > ---------------------------------------------------------------- > This mail sent through L-secure: http://www.l-secure.net/ > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use > rs > http://www.freeswitch.org ------------------------------ _______________________________________________ Freeswitch-users mailing list Freeswitch-users(a)lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org End of Freeswitch-users Digest, Vol 25, Issue 11 ************************************************

1 0

Erlang?
by Krešimir Tonković 03 Jul '08

03 Jul '08

Hi! I myself have bumbed into performance problems with heavy-weight languages like python and javascript, and the recommendation was to use lua because it is the simplest and most lightweight. I have not yet given lua a shot, but I have no reason to doubt the recommendation. If I read Brians answer to me a while ago correctly, a big reason for the performance problems is thread contention. If so, lua will reach it's limits a little bit above python and javascript's level, but will not truly scale either. Erlang was specifically designed to run ericsson's switches. It is immune to the kind of thread contention issues mentioned above and I think it would scale much better than any other procedural language. What do you think? -- Krešimir Tonković -- kresho

2 1

Reloading - restarting FS ?
by Henk Oegema 03 Jul '08

03 Jul '08

When I make a change in a XML file, must I reload (how?) or stop and start FS ? Or don't I need to do anything ? (wait for a while ?) Rgds Henk

7 12

Re: [Freeswitch-users] Compiled freeswitch for Windows Vista, any beginner's DOC avaialble?
by Kin Quek 03 Jul '08

03 Jul '08

Thanks Jeff. The problem was Visual Studio 2005 + Windows SDK Platform was not supported on Vista. I installed Visual Studio 2008 and ignored the error messages and FS built OK. Thanks for the help. Can you please point me to how to test out the new built FS? Is there any beginner's DOC available? Thanks, Kin > > From: "jeff sacksteder" <jsacksteder(a)gmail.com> > To: freeswitch-users(a)lists.freeswitch.org > Date: Wed, 2 Jul 2008 12:02:38 -0400 > Subject: Re: [Freeswitch-users] Compile freeswitch > for Windows Vista > > You can disregard those 'solution folder' messages. > The source > includes accommodations for building on linux, > vs2005 and vs2008 in > one location. > > In VS you can either build in release mode or debug > mode by setting a > build variable. > > On Wed, Jul 2, 2008 at 5:56 AM, Kin Quek > <kin_quek(a)yahoo.com> wrote: > > Hi All, > > > > I am new to FS and I tried to compile FS for > Windows Vista and I will > > appreciate help if anyone has this experience. > > > > I have installed VS 2005 Express Edition and > Platform SDK in Vista. I > > downloaded the FS source and unzip it to > freeswitch directory. I found > > Freeswitch.2008.sln and Freeswich.sln. I tried to > start Freeswitch.sln and > > got many error messages. > > > > Any suggestions? > > > > Thanks, > > > > Kin > >

1 0

Meeting at 5PM
by Brian West 02 Jul '08

02 Jul '08

Don't forget. Brian West sip:brian@freeswitch.org

1 0

Re: [Freeswitch-users] How to Configure SIP DID to IVR (Maybe fixed)
by Hristo Benev 02 Jul '08

02 Jul '08

Strange I changed regex to <DID> not ^<DID> and it worked?! >-------- Оригинално писмо -------- >От: Hristo Benev >Относно: Re: [Freeswitch-users] How to Configure SIP DID to IVR >До: freeswitch-users(a)lists.freeswitch.org >Изпратено на: Сряда, 2008, Юли 2 21:00:59 EEST >Here is the output: >--------------------------------------- >2008-07-02 13:48:47 [NOTICE] switch_channel.c:533 switch_channel_set_name() New Channel sofia/cisco/@ [c0d8586f-f6b9-4108-8676-c49e66f32e6d] >2008-07-02 13:48:47 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing ->@cisco >2008-07-02 13:49:12 [ERR] sofia_glue.c:450 sofia_glue_ext_address_lookup() Stun Failed! stun.freeswitch.org:3478 [Timeout] >2008-07-02 13:49:12 [NOTICE] mod_sofia.c:386 sofia_answer_channel() Hangup sofia/cisco/@ [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] >2008-07-02 13:49:12 [NOTICE] switch_core_session.c:753 switch_core_session_thread() Session 1 (sofia/cisco/@) Ended >2008-07-02 13:49:12 [NOTICE] switch_core_session.c:755 switch_core_session_thread() Close Channel sofia/cisco/@ [CS_HANGUP] >--------------------------------------- >CallinfNumber is the number I call from >CiscoIP is IP of Cisco AS >DIDNumber is DID I have > >Thanks > >I'm doing something wrong, but what? >Again Here are the files >/conf/sip_profiles/cisco.xml (just copied external.xml and changed sip port) >----------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >---------------------------------------------------------- >/conf/dialpaln/cisco.xml >--------------------------------------------------------- > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >---------------------------------------------- >Sensitive data is obfuscated > > > > >-------- Оригинално писмо -------- > >От: Michael Jerris > >Относно: Re: [Freeswitch-users] How to Configure SIP DID to IVR > >До: freeswitch-users(a)lists.freeswitch.org > >Изпратено на: Сряда, 2008, Юли 2 20:22:31 EEST > > >Most likely its not actually matching the extension or it runs out of > >actions to perform, can you post the full debug logs from the console? > > > >Mike > > > >On Jul 2, 2008, at 1:14 PM, Hristo Benev wrote: > > > >>> -------- Оригинално писмо -------- > >>> От: Michael Jerris > >>> Относно: Re: [Freeswitch-users] How to Configure SIP DID to IVR > >>> До: freeswitch-users(a)lists.freeswitch.org > >>> Изпратено на: Сряда, 2008, Юли 2 19:24:22 EEST > >> > >>> "^" seems like an invalid regex. is that literally what > >>> you have there or you have some number? > >>> > >>> Mike > >>> > >>> On Jul 2, 2008, at 12:16 PM, Hristo Benev wrote: > >>> > >>>> Hi, > >>>> > >>>> I'm new to FS and trying to configure DID only configuration. > >>>> > >>>> Here is the setup: > >>>> PSTN Cisco AS(realIP/maybe multiple ones in production) > >>>> FS(realIP) > >>>> > >>>> Cisco box is configured to send SIP to IP (real IP nor 192.168.x.x > >>>> type) and I do not have much control over it. No authentication is > >>>> needed. > >>>> > >>>> I'm using FS 1.0.0 > >>>> > >>>> What I need to configure to send incoming PSTN calls to demo IVR > >>>> What I've changed? > >>>> Created cisco.xml file in /conf/directory/default > >>>> ---------------- > >>>> > >>>> > >>>> "/> > >>>> "/> > >>>> "/> > >>>> > >>>> > >>>> ------------------ > >>>> Added to /conf/dialplan/default.xml > >>>> ----------------------------- > >>>> > >>>> > >>>> "> > >>>> > >>>> > >>>> > >>>> > >>>> > >>>> ------------------------------ > >>>> When I call DID it just rings. > >>>> If I connect to FS with SoftPhone on extension and I dial DID. > >>>> > >>>> I was able to get this configuration working with Asterisk(but had > >>>> some sound quality issues and wanted to try something else) so there > >>>> is no HW problem. > >>>> > >>>> Where is my misconfiguration(hopefully just this)? > >>>> > >>>> Thanks > >>>> > >>>> _______________________________________________ > >>>> Freeswitch-users mailing list > >>>> Freeswitch-users(a)lists.freeswitch.org > >>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >>>> http://www.freeswitch.org > >>> > >>> > >>> _______________________________________________ > >>> Freeswitch-users mailing list > >>> Freeswitch-users(a)lists.freeswitch.org > >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >>> http://www.freeswitch.org > >> > >> > >> Yes there is an actual number that I do not wanted to disclose. > >> > >> I have some progress now call are accepted by FS, but something is > >> wrong after dialplan_hunt() is executed it hangs up. > >> > >> Thanks > >> > >> _______________________________________________ > >> Freeswitch-users mailing list > >> Freeswitch-users(a)lists.freeswitch.org > >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> http://www.freeswitch.org > > > > > >_______________________________________________ > >Freeswitch-users mailing list > >Freeswitch-users(a)lists.freeswitch.org > >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >http://www.freeswitch.org > > > >_______________________________________________ >Freeswitch-users mailing list >Freeswitch-users(a)lists.freeswitch.org >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >http://www.freeswitch.org >

2 1

Re: [Freeswitch-users] How to Configure SIP DID to IVR
by Hristo Benev 02 Jul '08

02 Jul '08

Here is the output: --------------------------------------- 2008-07-02 13:48:47 [NOTICE] switch_channel.c:533 switch_channel_set_name() New Channel sofia/cisco/<CallingNumber>@<CIscoIP> [c0d8586f-f6b9-4108-8676-c49e66f32e6d] 2008-07-02 13:48:47 [INFO] mod_dialplan_xml.c:222 dialplan_hunt() Processing <CAllingNumber>-><DIDNumber>@cisco 2008-07-02 13:49:12 [ERR] sofia_glue.c:450 sofia_glue_ext_address_lookup() Stun Failed! stun.freeswitch.org:3478 [Timeout] 2008-07-02 13:49:12 [NOTICE] mod_sofia.c:386 sofia_answer_channel() Hangup sofia/cisco/<CallingNumber>@<CiscoIP> [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-07-02 13:49:12 [NOTICE] switch_core_session.c:753 switch_core_session_thread() Session 1 (sofia/cisco/<CallingNumber>@<CicoIP>) Ended 2008-07-02 13:49:12 [NOTICE] switch_core_session.c:755 switch_core_session_thread() Close Channel sofia/cisco/<CallingNumber>@<CiscoIP> [CS_HANGUP] --------------------------------------- CallinfNumber is the number I call from CiscoIP is IP of Cisco AS DIDNumber is DID I have Thanks I'm doing something wrong, but what? Again Here are the files /conf/sip_profiles/cisco.xml (just copied external.xml and changed sip port) -----------------------------------  <profile name="cisco">  <gateways> <X-PRE-PROCESS cmd="include" data="cisco/*.xml"/> </gateways> <aliases> <alias name="cisco"/> </aliases> <domains> <domain name="$${domain}" parse="true"/> </domains> <settings> <param name="debug" value="5"/> <param name="sip-trace" value="no"/> <param name="rfc2833-pt" value="101"/> <param name="sip-port" value="5060"/> <param name="dialplan" value="XML"/> <param name="context" value="cisco"/> <param name="dtmf-duration" value="100"/> <param name="codec-prefs" value="$${outbound_codec_prefs}"/> <param name="hold-music" value="$${hold_music}"/> <param name="use-rtp-timer" value="true"/> <param name="rtp-timer-name" value="soft"/> <param name="manage-presence" value="false"/> <param name="aggressive-nat-detection" value="true"/> <param name="inbound-codec-negotiation" value="generous"/> <param name="nonce-ttl" value="60"/> <param name="auth-calls" value="false"/> <param name="rtp-timeout-sec" value="1800"/> <param name="rtp-ip" value="$${local_ip_v4}"/> <param name="sip-ip" value="$${local_ip_v4}"/> <param name="ext-rtp-ip" value="$${external_rtp_ip}"/> <param name="ext-sip-ip" value="$${external_sip_ip}"/> <param name="rtp-timeout-sec" value="300"/> <param name="rtp-hold-timeout-sec" value="1800"/> </settings> </profile> ---------------------------------------------------------- /conf/dialpaln/cisco.xml ---------------------------------------------------------  <include> <context name="cisco"> <extension name="cisco1"> <condition field="network_addr" expression="^xxx\.xxx\.xxx\.xxx$"/> <condition field="destination_number" expression="^xxxxxxxxxxxx$"> <action application="answer"/> <action application="sleep" data="2000"/> <action application="ivr" data="demo_ivr"/> </condition> </extension> <extension name="cisco2"> <condition field="network_addr" expression="^xxx\.xxx\.xxx\.xxx$"/> <condition field="destination_number" expression="^xxxxxxxxxxxx$"> <action application="answer"/> <action application="sleep" data="2000"/> <action application="ivr" data="demo_ivr"/> </condition> </extension> <extension name="cisco3"> <condition field="network_addr" expression="^xxx\.xxx\.xxx\.xxx$"/> <condition field="destination_number" expression="^xxxxxxxxxxx$"> <action application="answer"/> <action application="sleep" data="2000"/> <action application="ivr" data="demo_ivr"/> </condition> </extension> <extension name="cisco4"> <condition field="network_addr" expression="^xxx\.xxx\.xxx\.xxx$"/> <condition field="destination_number" expression="^xxxxxxxxxxx$"> <action application="answer"/> <action application="sleep" data="2000"/> <action application="ivr" data="demo_ivr"/> </condition> </extension> </context> </include> ---------------------------------------------- Sensitive data is obfuscated >-------- Оригинално писмо -------- >От: Michael Jerris >Относно: Re: [Freeswitch-users] How to Configure SIP DID to IVR >До: freeswitch-users(a)lists.freeswitch.org >Изпратено на: Сряда, 2008, Юли 2 20:22:31 EEST >Most likely its not actually matching the extension or it runs out of >actions to perform, can you post the full debug logs from the console? > >Mike > >On Jul 2, 2008, at 1:14 PM, Hristo Benev wrote: > >>> -------- Оригинално писмо -------- >>> От: Michael Jerris >>> Относно: Re: [Freeswitch-users] How to Configure SIP DID to IVR >>> До: freeswitch-users(a)lists.freeswitch.org >>> Изпратено на: Сряда, 2008, Юли 2 19:24:22 EEST >> >>> "^" seems like an invalid regex. is that literally what >>> you have there or you have some number? >>> >>> Mike >>> >>> On Jul 2, 2008, at 12:16 PM, Hristo Benev wrote: >>> >>>> Hi, >>>> >>>> I'm new to FS and trying to configure DID only configuration. >>>> >>>> Here is the setup: >>>> PSTN Cisco AS(realIP/maybe multiple ones in production) >>>> FS(realIP) >>>> >>>> Cisco box is configured to send SIP to IP (real IP nor 192.168.x.x >>>> type) and I do not have much control over it. No authentication is >>>> needed. >>>> >>>> I'm using FS 1.0.0 >>>> >>>> What I need to configure to send incoming PSTN calls to demo IVR >>>> What I've changed? >>>> Created cisco.xml file in /conf/directory/default >>>> ---------------- >>>> >>>> >>>> "/> >>>> "/> >>>> "/> >>>> >>>> >>>> ------------------ >>>> Added to /conf/dialplan/default.xml >>>> ----------------------------- >>>> >>>> >>>> "> >>>> >>>> >>>> >>>> >>>> >>>> ------------------------------ >>>> When I call DID it just rings. >>>> If I connect to FS with SoftPhone on extension and I dial DID. >>>> >>>> I was able to get this configuration working with Asterisk(but had >>>> some sound quality issues and wanted to try something else) so there >>>> is no HW problem. >>>> >>>> Where is my misconfiguration(hopefully just this)? >>>> >>>> Thanks >>>> >>>> _______________________________________________ >>>> Freeswitch-users mailing list >>>> Freeswitch-users(a)lists.freeswitch.org >>>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>>> http://www.freeswitch.org >>> >>> >>> _______________________________________________ >>> Freeswitch-users mailing list >>> Freeswitch-users(a)lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >> >> >> Yes there is an actual number that I do not wanted to disclose. >> >> I have some progress now call are accepted by FS, but something is >> wrong after dialplan_hunt() is executed it hangs up. >> >> Thanks >> >> _______________________________________________ >> Freeswitch-users mailing list >> Freeswitch-users(a)lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > >_______________________________________________ >Freeswitch-users mailing list >Freeswitch-users(a)lists.freeswitch.org >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >http://www.freeswitch.org >

1 0