April 2008 - FreeSWITCH-users - FreeSWITCH Mailing Lists

Switching from digest to basic authentication
by Maxim Karp 30 Apr '08

30 Apr '08

Hello, I am using a WM6 mobile client to connect to FS that doesn't seem to like digest authentication. How can I disable digest and enable basic authentication? Thanks, Maxim.

2 1

Weekly Wiki Cram Sessions proposal!
by Brian West 29 Apr '08

29 Apr '08

We are working on setting up a weekly or two time weekly hour long wiki cram session where we do documentation on the wiki about various features sets... Guess you could call it whack a mole for docs. The proposal is this: 1PM CST, Recorded session podcast for everyone to follow up with that couldn't make it. As we go along we can have everyone ask questions and we'll get answers to all the questions that can then be input into the wiki by people asking the questions and filling in the holes in the documentation. I feel that doing this is key. If you think this is a good idea please let me know... What days do you propose we do these calls on? You can also call me at the address below or via freenum at 1000*543 (its in the default config) The conferences would be held via SIP or PSTN http://conference.freeswitch.org EVERYONE is welcome even if you're not a developer because everyone can help out in one way or another and we welcome it. Brian West sip:brian@freeswitch.org PS: the time is not set in stone but anything close to that would be good.

6 9

getting started help
by Larry Edelstein 29 Apr '08

29 Apr '08

Hi all - I installed Freeswitch a few weeks ago and was never quite able to connect to it via Gizmo or IPKall. I can't seem to configure the directory correctly and get my Gizmo phone to register; my IPKall phone doesn't seem to get anywhere either. I'm a little fuzzy on the exact error messages I got, and before I go run my head into that wall again I figured I'd post for help. I'm pretty sure that the software failed to find the user...extension...in the FS directory. So I couldn't register the...phone. Or something. I'm new to SIP. My main goal is to enable some dial-in and dial-out services from POTS and wireless phones, but getting SIP phones to work would be a start. Although I'm a hugely experienced software guy, I haven't worked with SIP or telephony before. So I am playing catchup. If someone could give me some tips on which files I need to modify to support this scenario, that would be great: - I have an IPKall number, and when I call it, I get to a Freeswitch service. - I have a Gizmo phone, and when I call it, I get to a Freeswitch service. - I can call out from Freeswitch to a SIP phone. - (lower priority) I can call out from Freeswitch to any phone. Thanks Larry Edelstein Now Answers LLC

2 1

uuid_record overlaps channels
by Jonathan Palley 29 Apr '08

29 Apr '08

Hello all - I'm using uuid_record to record calls. We are encountering a problem where the voice for either channels starts overlapping and not being in sync as it is in the actual call. I'm guessing perhaps I'm missing a settings to make sure the calls are mixed in realtime and recorded as they actually sound on the server? Anyone know? I can provide example recording privately. Thanks - Jonathan

2 1

Multiple FS servers sharing registration data
by Mikael A. Bjerkeland 28 Apr '08

28 Apr '08

Hi, is it possible to have one FS server acting as a registrar and several other FS servers using the same registration data for authenticating calls? If so, what are the options? I saw some notions of ODBC support, but no documentation on the tables which must be created. Is ODBC the approach? Regards, Mikael

2 1

Remote SIP extension deployment
by Chris Chen 27 Apr '08

27 Apr '08

Could any of you share your experience with remote SIP extensions behind another NAT? Basically my setup whould be like this: [ Remote SIP extensions]------>(private IP@) NAT Router B---(public IP @B)-------(Internet Cloud)-----------(public IP @A) NAT Router A---(private IP @A)------(private IP@C)[Freeswitch] I have the domain registered as "sip.mydomain.com" let's see, I am trying to config the remote SIP extension as 1018 using port 5080 hitting the public context, but I got the error on the freeswitch console "user 1018(a)sip.mydomain.com not found" Could you guys guide me to the right direction for remote SIP extensions' deploymen? Your helps are appreciate. Thanks, Chris

2 3

Sending Out Event from JS
by Pete Kay 27 Apr '08

27 Apr '08

Hi, I am trying to get events to be fired out using the following codes in JS: e = new Event("custom", "message"); var txt = "main menu==========="; e.addBody(txt); session.sendEvent(e); Within my client, I sent "Plain event all" to listen to all events. Then, I filtered on all the events, but I can't find anything that has the text "main", "menu", "custom" or "message". I am wondering if my code has bug or I was not looking at the right place in my event log. Could someone please give me some suggestion? Any help will be greatly appreciated. Thanks, Pete

1 0

Call For Open Source Awards 2008 Nominations
by Brian West 26 Apr '08

26 Apr '08

http://radar.oreilly.com/archives/2008/04/open-source-award-nominations.html you know what to do! /b

2 1

eavesdrop dtmf commands
by Tamas Cseke 26 Apr '08

26 Apr '08

Hello, Could you please tell me the documented behaviour is correct on this page: http://wiki.freeswitch.org/wiki/Misc._Dialplan_Tools_eavesdrop When I eavesdrop an uuid without any dtmf command: The other half is deaf, and I can talk with uuid, and we are hear the other half. 0 and 1 dtmfs seems to be inefficient, nothing change, the behaviour is the same as above. But when i try with dtmf 2, 3 or three_way app. the uuid hear a terrible noise. I tried this with svn trunk r8193 both on windows xp and ubuntu linux. I would like to make somehow a three way call. And somehow uuid should talk with the other half during spy, could you tell me if is it possible? Thanks any help, Tamas

2 2

Having problem sending and receiving faxes
by Pete Kay 26 Apr '08

26 Apr '08

Hi, I am unable to get FS to send and receive faxes and I hope someone can give me a hand. When sending the fax, I get the following error from sock2me: Sending Fax filename: [/home/anne/abcd.tiff] from 127.0.0.1:9015 -> 127.0.0.1:9016 Phase B handler on session 0 - (0x80) DIS Phase E handler on session 0 - (14) TIFF/F file cannot be opened Phase E: bit rate 9600 Phase E: ECM on Phase E: pages transferred 0 Phase E: image size 0 x 0 Phase E: image resolution 0 x 0 Phase E: bad rows 0 Phase E: longest bad row run 0 Phase E: coding method ??? Phase E: image size 0 bytes Phase E: local ident 'Socket 2 ME' Phase E: remote ident '' Phase E: Remote was made in 'Japan' Phase E: Remote was made by 'Sharp/Olivetti' Done There should not be problem with permission, as I can do the following: ser:/usr/local/freeswitch# ls -al /home/anne/abc.tiff -rw-r--r-- 1 anne anne 15344 2008-04-26 22:06 /home/anne/abc.tiff When attempting to send from FS, there is no response from sock2me. In the console, I get the following: 2008-04-27 08:41:30 [INFO] mod_dialplan_xml.c:223 dialplan_hunt() Processing 1006->fax@all 2008-04-27 08:41:30 [DEBUG] mod_dialplan_xml.c:107 parse_exten() test conditions destination_number(fax) =~ /^fax$/ 2008-04-27 08:41:30 [DEBUG] switch_core_state_machine.c:96 switch_core_standard_on_ring() sofia/default/1006@192.168.1.104:5060 State Change CS_RING -> CS_EXECUTE 2008-04-27 08:41:30 [DEBUG] switch_core_session.c:670 switch_core_session_signal_state_change() Kill sofia/default/ 1006@192.168.1.104:5060 [BREAK] 2008-04-27 08:41:30 [DEBUG] switch_core_state_machine.c:460 switch_core_session_run() (sofia/default/1006@192.168.1.104:5060) State RING going to sleep 2008-04-27 08:41:30 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() sofia/default/1006@192.168.1.104:5060 Running State Change CS_EXECUTE 2008-04-27 08:41:30 [DEBUG] switch_core_state_machine.c:470 switch_core_session_run() (sofia/default/1006@192.168.1.104:5060) State EXECUTE 2008-04-27 08:41:30 [DEBUG] mod_sofia.c:156 sofia_on_execute() sofia/default/1006@192.168.1.104:5060 SOFIA EXECUTE 2008-04-27 08:41:30 [DEBUG] switch_core_state_machine.c:129 switch_core_standard_on_execute() Standard EXECUTE 2008-04-27 08:41:30 [DEBUG] switch_core_state_machine.c:142 switch_core_standard_on_execute() sofia/default/1006@192.168.1.104:5060Execute answer() 2008-04-27 08:41:30 [DEBUG] switch_core_state_machine.c:142 switch_core_standard_on_execute() sofia/default/1006@192.168.1.104:5060Execute echo(get a fax=======================>) 2008-04-27 08:41:30 [DEBUG] switch_core_io.c:347 switch_core_session_read_frame() Engaging Read Buffer at 480 bytes 2008-04-27 08:41:58 [DEBUG] sofia.c:219 sofia_event_callback() event [nua_i_outbound] status [102][NAT binding changed] session: n/a 2008-04-27 08:41:58 [DEBUG] sofia.c:345 sofia_event_callback() nua_i_outbound: unknown event 8: 102 NAT binding changed 2008-04-27 08:41:58 [DEBUG] sofia_reg.c:87 sofia_reg_check_gateway() registered callwithus 2008-04-27 08:42:01 [DEBUG] sofia.c:1565 sofia_handle_sip_i_state() Channel sofia/default/1006@192.168.1.104:5060 entering state [terminated] 2008-04-27 08:42:01 [NOTICE] sofia.c:1962 sofia_handle_sip_i_state() Hangup sofia/default/1006@192.168.1.104:5060 [CS_EXECUTE] [NORMAL_CLEARING] 2008-04-27 08:42:01 [DEBUG] switch_channel.c:1355 switch_channel_perform_hangup() Kill sofia/default/1006@192.168.1.104:5060[KILL] 2008-04-27 08:42:01 [DEBUG] switch_core_session.c:670 switch_core_session_signal_state_change() Kill sofia/default/ 1006@192.168.1.104:5060 [BREAK] 2008-04-27 08:42:01 [DEBUG] switch_core_state_machine.c:470 switch_core_session_run() (sofia/default/1006@192.168.1.104:5060) State EXECUTE going to sleep 2008-04-27 08:42:01 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() sofia/default/1006@192.168.1.104:5060 Running State Change CS_HANGUP 2008-04-27 08:42:01 [DEBUG] switch_core_state_machine.c:434 switch_core_session_run() (sofia/default/1006@192.168.1.104:5060) State HANGUP 2008-04-27 08:42:01 [DEBUG] mod_sofia.c:255 sofia_on_hangup() Channel sofia/default/1006@192.168.1.104:5060 hanging up, cause: NORMAL_CLEARING 2008-04-27 08:42:01 [DEBUG] switch_core_state_machine.c:46 switch_core_standard_on_hangup() Standard HANGUP sofia/default/ 1006@192.168.1.104:5060, cause: NORMAL_CLEARING 2008-04-27 08:42:01 [DEBUG] switch_core_state_machine.c:434 switch_core_session_run() (sofia/default/1006@192.168.1.104:5060) State HANGUP going to sleep 2008-04-27 08:42:01 [DEBUG] switch_core_session.c:730 switch_core_session_thread() Session 160 (sofia/default/ 1006@192.168.1.104:5060) Locked, Waiting on external entities 2008-04-27 08:42:01 [NOTICE] switch_core_session.c:748 switch_core_session_thread() Session 160 (sofia/default/ 1006@192.168.1.104:5060) Ended 2008-04-27 08:42:01 [NOTICE] switch_core_session.c:750 switch_core_session_thread() Close Channel sofia/default/ 1006@192.168.1.104:5060 [CS_HANGUP] 2008-04-27 08:42:01 [DEBUG] switch_core_media_bug.c:284 switch_core_media_bug_remove_all() Removing BUG from sofia/default/ 1006@192.168.1.104:5060 Can someone please kindly tell me what the problem could be and how can I fix it? Thanks alot for all you kind input. Best Regards, Pete

1 0