July 2007 - FreeSWITCH-users - FreeSWITCH Mailing Lists

FreeSwitch and T.38
by Helmut Kuper 19 Jul '07

19 Jul '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, has someone successfully used freeswitch for T.38 fax? If so, can you explain to me how to set freeswitch up? First call setup was successful, but then fax target sent a re-INVITE and freeswitch terminated the call because of a codec error (see attached log sequence). regards Helmut - --Console LOG-- nta: sent 200 OK for INVITE (118) nua(0x809fec8): event i_invite 200 OK nua(0x809fec8): ready call updated: completed received offer, sent answer soa_get_remote_sdp(static::0x80a4970, [0x413fedd8], [0x413fedd4], [(nil)]) called soa_get_local_sdp(static::0x80a4970, [0x413fedd0], [0x413fedcc], [(nil)]) called soa_get_params(static::0x80a4970, ...) called nua(0x809fec8): event i_state 200 OK nua: nua_event: entering nua: nua_event: entering 2007-07-17 11:12:08 [DEBUG] sofia.c:1028 sofia_handle_sip_i_state() Channel sofia/sip0.en.ewetel.de/044180002799(a)sip01.voice.ewetel.de entering state [completed] 2007-07-17 11:12:08 [DEBUG] sofia.c:1032 sofia_handle_sip_i_state() Remote SDP: v=0 o=bell 1216809 1216810 IN IP4 213.168.198.84 s=- c=IN IP4 213.168.198.84 t=0 0 m=image 10844 UDPTL t38 a=T38FaxVersion:0 a=T38MaxBitRate:14400 a=T38FaxRateManagement:transferredTCF a=T38FaxMaxBuffer:336 a=T38FaxMaxDatagram:176 a=T38FaxUdpEC:t38UDPRedundancy 2007-07-17 11:12:08 [ERR] sofia.c:1218 sofia_handle_sip_i_state() Reinvite Codec Error! -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (MingW32) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFGnIxp4tZeNddg3dwRAt9EAJ0QpFyIrHjaFIxS46n2Px9SHHbKjwCfa2H9 ezoC6omq/XE1gw6alnGxn1Y= =EiNE -----END PGP SIGNATURE-----

2 4

Remove JIRA Account
by Esben Stien 19 Jul '07

19 Jul '07

Somehow I signed up to the bug tracker, JIRA, before I knew it was proprietary software. I can't find any way to remove my account. My account name is: b0ef Any pointers as to what I can try?. -- Esben Stien is b0ef@e s a http://www. s t n m irc://irc. b - i . e/%23contact sip:b0ef@ e e jid:b0ef@ n n

2 3

sip registration
by cake918＠126.com 19 Jul '07

19 Jul '07

hello, when i use the <registration>...</registration> to configure my freeswitch to register a sip caller,the debug shows "the <registrations> syntax has been discontinued,please see the new syntax in the default configuratin examples". my configuration file is as follow: <registrations> <registration name="1000"> <param name="register-scheme" value="Digest"/> <param name="register-realm" value="mydomain"/> <param name="register-username" value="1000"/> <param name="register-password" value="1111"/> <param name="register-from" value="sip:1000@mydomain:5060"/> <param name="regtiste-to" value="sip:mydomain"/> <param name="register-proxy" value="sip:mydomain"/> <param name="register-frequency" value="20"/> </registration> </registrations> * in the above file ,the mydomain is replaced by the ip address of my freeswitch server. why the registration syntax is dicontinued, and who can give me an example on the true configuration ? thang you very much ! iPod、万点巨额点卡、奖学金……海量奖品，想拿就拿！

2 1

auto dialer
by Abraham Korah 17 Jul '07

17 Jul '07

I am trying to port an application that dial a set of numbers to play an announcement. That is, the when they take the phone, they will hear the announcement. The application will dial the numbers Any idea how I can do this using Freeswitch. at present we are using a commercial VOIP SIP engine to do this We would like to port the application to Freeswitch. Thanks Abe

2 2

Dial from inside application
by Abraham Korah 17 Jul '07

17 Jul '07

Hi Anthony I a looking for a way to port an application from Asterisk to Freeswitch. Our application will dial a number (pstn) and when the party picks up the phone, will play a sound file. How I can do this using freeswitch. I am using SIP. I saw your reply for a "Dial from inside application". How many calls I can generate using Freeswitch, at a time ? Anticipating your help in this regard. Thanks Abraham

1 0

how to connect UA to the freeswitch
by cake918＠126.com 16 Jul '07

16 Jul '07

hello, i just began study the freeswitch,and i want to get a UA connect to the freeswitch ,which i have already run on my VMware. who can give me an example on how to configure the *.xml file ? Thanks a lot! 一起来，150 万人同时在玩的梦幻西游

3 2

voice recording
by Tamas Cseke 12 Jul '07

12 Jul '07

Hello, I would interest in voicerecording a bit deeper, that i found in documentation. Could you please answer the following questions? Sometimes i answer my questions, in this case please confirm me :) How can i influence the sample rate of the file? I think the sample rate of the codec used in the actual channel is used. Is it possible to set explicit the rample rate independently from the codec? or is it no sense... How can i set the number of channels? I guess the case is the same as in sample rate, the codec tells it. Can i choose to set mono or stereo recording? Is it possible when i record a stereo file, that the caller and called is recorded in a separate channel? Is the recording buffered? I know it use media bug, and i guess it is buffered. Is it possible to boost while recording? Thanks in advance, Tamas

1 0

Problem with running application
by Andrzej Smyk 12 Jul '07

12 Jul '07

Hello I've got one problem with this software. During start app freezes at 2007-07-12 09:52:07 [DEBUG] mod_sofia.c:1491 mod_sofia_load() Waiting for profiles to start I think, it's problem with linuxthreads under Freebsd, but i'm not sure.. Without sofia everyting is ok., but in my case (gateway between jingle and sip) totally unusable. Cheers Andrew

1 0

Re: [Freeswitch-users] freeSwitch - Windows Vista - Build errors
by Shiladitya Sircar 11 Jul '07

11 Jul '07

Seems like you your linker is not configured to build win32 libs and is missing dependencies. First configure your win32 environment includes and libs. If you are using express edition then you have to do additional configuration of include paths as detailed in ms vc++ express edition install guides. On 7/10/07, Bharath B. Reddy Bynagari <bynagari(a)pranetinc.com> wrote: > > Hi, > > I am trying to build the code in Microfost VC++. I am getting these erros. > Can somebody help me? Its been 6 years since I coded in VC++. > > 1>------ Build started: Project: libapr, Configuration: Debug Win32 ------ > > 2>------ Build started: Project: libpcre Generate pcre_chartables.c, > Configuration: Debug Win32 ------ > > 2>Compiling... > > 1>Performing Pre-Build Event... > > 1>0 File(s) copied > > 1>Linking... > > 2>dftables.c > > 2>Linking... > > 2>Embedding manifest... > > 1> Creating library .\Debug/libapr-1.lib and object .\Debug/libapr-1.exp > > 2>Performing Post-Build Event... > > 1>filestat.obj : error LNK2019: unresolved external symbol > __imp__AllocateAndInitializeSid@44 referenced in function _resolve_prot > > 1>filestat.obj : error LNK2019: unresolved external symbol > __imp__FreeSid@4 referenced in function _free_world > > 1>rand.obj : error LNK2019: unresolved external symbol > __imp__CryptReleaseContext@8 referenced in function > _apr_generate_random_bytes@8 > > 1>rand.obj : error LNK2019: unresolved external symbol > __imp__CryptGenRandom@12 referenced in function _apr_generate_random_bytes@8 > > 1>rand.obj : error LNK2019: unresolved external symbol > __imp__CryptAcquireContextA@20 referenced in function > _apr_generate_random_bytes@8 > > 1>proc.obj : error LNK2019: unresolved external symbol > __imp__SetSecurityDescriptorDacl@16 referenced in function > _apr_procattr_user_set@12 > > 1>proc.obj : error LNK2019: unresolved external symbol > __imp__InitializeSecurityDescriptor@8 referenced in function > _apr_procattr_user_set@12 > > 1>proc.obj : error LNK2019: unresolved external symbol > __imp__DuplicateTokenEx@24 referenced in function _apr_procattr_user_set@12 > > 1>proc.obj : error LNK2019: unresolved external symbol > __imp__LogonUserW@24 referenced in function _apr_procattr_user_set@12 > > 1>proc.obj : error LNK2019: unresolved external symbol > __imp__RevertToSelf@0 referenced in function _apr_proc_create@24 > > 1>proc.obj : error LNK2019: unresolved external symbol > __imp__CreateProcessAsUserW@44 referenced in function _apr_proc_create@24 > > 1>proc.obj : error LNK2019: unresolved external symbol > __imp__ImpersonateLoggedOnUser@4 referenced in function _apr_proc_create@24 > > 1>groupinfo.obj : error LNK2019: unresolved external symbol > __imp__LookupAccountNameA@28 referenced in function _apr_gid_get@12 > > 1>userinfo.obj : error LNK2001: unresolved external symbol > __imp__LookupAccountNameA@28 > > 1>groupinfo.obj : error LNK2019: unresolved external symbol > __imp__LookupAccountSidA@28 referenced in function _apr_gid_name_get@12 > > 1>userinfo.obj : error LNK2001: unresolved external symbol > __imp__LookupAccountSidA@28 > > 1>groupinfo.obj : error LNK2019: unresolved external symbol > __imp__EqualSid@8 referenced in function _apr_gid_compare@8 > > 1>userinfo.obj : error LNK2001: unresolved external symbol > __imp__EqualSid@8 > > 1>groupinfo.obj : error LNK2019: unresolved external symbol > __imp__IsValidSid@4 referenced in function _apr_gid_compare@8 > > 1>userinfo.obj : error LNK2001: unresolved external symbol > __imp__IsValidSid@4 > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__GetSidSubAuthority@8 referenced in function _get_sid_string > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__GetSidSubAuthorityCount@4 referenced in function _get_sid_string > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__GetSidIdentifierAuthority@4 referenced in function _get_sid_string > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__RegQueryValueExA@24 referenced in function _apr_uid_homepath_get@12 > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__RegCloseKey@4 referenced in function _apr_uid_homepath_get@12 > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__RegQueryValueExW@24 referenced in function _apr_uid_homepath_get@12 > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__RegOpenKeyExA@20 referenced in function _apr_uid_homepath_get@12 > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__GetTokenInformation@20 referenced in function _apr_uid_current@12 > > 1>userinfo.obj : error LNK2019: unresolved external symbol > __imp__OpenProcessToken@12 referenced in function _apr_uid_current@12 > > 1>C:\freeSwitch\Source\freeswitch_snapshot\Debug\libapr.dll : fatal error > LNK1120: 25 unresolved externals > > 1>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\apr\Debug\BuildLog.htm" > > 1>libapr - 30 error(s), 0 warning(s) > > 3>------ Build started: Project: libapriconv, Configuration: Debug Win32 > ------ > > 3>Performing Pre-Build Event... > > 3>0 File(s) copied > > 3>Linking... > > 2>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\pcre\Debug\BuildLog.htm" > > 2>libpcre Generate pcre_chartables.c - 0 error(s), 0 warning(s) > > 3> Creating library .\Debug/libapriconv-1.lib and object > .\Debug/libapriconv-1.exp > > 4>------ Build started: Project: libpcre, Configuration: Debug Win32 > ------ > > 4>libpcre : warning PRJ0009 : Build log could not be opened for writing. > > 4>Make sure that the file is not open by another process and is not > write-protected. > > 4>Compiling... > > 3>Embedding manifest... > > 4>pcre_chartables.c > > 4>Creating library... > > 4>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\pcre\Debug\BuildLog.htm" > > 4>libpcre - 0 error(s), 1 warning(s) > > 3>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\apr-iconv\Debug\BuildLog.htm" > > 3>libapriconv - 0 error(s), 0 warning(s) > > 5>------ Build started: Project: libaprutil, Configuration: Debug Win32 > ------ > > 5>Performing Pre-Build Event... > > 6>------ Build started: Project: js, Configuration: Debug Win32 ------ > > 6>Performing Pre-Build Event... > > 5>0 File(s) copied > > 6>Embedding manifest... > > 5>Compiling... > > 5>xlate.c > > 6>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\js\Debug\BuildLog.htm" > > 6>js - 0 error(s), 0 warning(s) > > 5>apr_uri.c > > 7>------ Build started: Project: libetpan, Configuration: Debug Win32 > ------ > > 7>Embedding manifest... > > 5>apr_strmatch.c > > 7>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\etpan\Debug\BuildLog.htm" > > 7>libetpan - 0 error(s), 0 warning(s) > > 5>sdbm_pair.c > > 5>sdbm_lock.c > > 5>sdbm_hash.c > > 5>sdbm.c > > 5>apr_rmm.c > > 5>apr_reslist.c > > 5>apr_queue.c > > 5>apr_date.c > > 5>apr_ldap_url.c > > 5>apr_ldap_option.c > > 5>apr_ldap_init.c > > 5>apr_hooks.c > > 5>apr_base64.c > > 5>apr_dbm_sdbm.c > > 5>apr_dbm_gdbm.c > > 5>apr_dbm_berkeleydb.c > > 5>apr_dbm.c > > 5>Generating Code... > > 5>Compiling... > > 5>apr_dbd_sqlite3.c > > 5>apr_dbd_sqlite2.c > > 5>apr_dbd_pgsql.c > > 5>apr_dbd.c > > 5>uuid.c > > 5>getuuid.c > > 5>apr_sha1.c > > 5>apr_md5.c > > 5>apr_md4.c > > 5>apr_buckets_socket.c > > 5>apr_buckets_simple.c > > 5>apr_buckets_refcount.c > > 5>apr_buckets_pool.c > > 5>apr_buckets_pipe.c > > 5>apr_buckets_mmap.c > > 5>apr_buckets_heap.c > > 5>apr_buckets_flush.c > > 5>apr_buckets_file.c > > 5>apr_buckets_eos.c > > 5>apr_buckets_alloc.c > > 5>Generating Code... > > 5>Compiling... > > 5>apr_buckets.c > > 5>apr_brigade.c > > 5>Generating Code... > > 5>Linking... > > 5> Creating library .\Debug/libaprutil-1.lib and object > .\Debug/libaprutil-1.exp > > 5>Embedding manifest... > > 5>Performing Post-Build Event... > > 5>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\apr-util\Debug\BuildLog.htm" > > 5>libaprutil - 0 error(s), 0 warning(s) > > 8>------ Build started: Project: FreeSwitchCoreLib, Configuration: Debug > Win32 ------ > > 8>Compiling... > > 8>switch_ivr_play_say.c > > 8>..\..\src\switch_ivr_play_say.c(945) : error C2220: warning treated as > error - no 'object' file generated > > 8>..\..\src\switch_ivr_play_say.c(945) : warning C4244: '=' : conversion > from 'switch_size_t' to 'uint32_t', possible loss of data > > 8>..\..\src\switch_ivr_play_say.c(948) : warning C4244: '=' : conversion > from 'switch_size_t' to 'uint32_t', possible loss of data > > 8>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\w32\Library\Debug\BuildLog > FreeSwitchCoreLib.htm" > > 8>FreeSwitchCoreLib - 1 error(s), 2 warning(s) > > 9>------ Build started: Project: mod_spidermonkey, Configuration: Debug > Win32 ------ > > 10>------ Build started: Project: mod_sofia, Configuration: Debug Win32 > ------ > > 9>Linking... > > 10>Linking... > > 9>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 9>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey\Debug\BuildLog.htm" > > 9>mod_spidermonkey - 1 error(s), 0 warning(s) > > 10>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 10>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_sofia\Debug\BuildLog.htm" > > 10>mod_sofia - 1 error(s), 0 warning(s) > > 11>------ Build started: Project: mod_g726, Configuration: Debug Win32 > ------ > > 11>Linking... > > 11>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 11>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g726\Debug\BuildLog.htm" > > 11>mod_g726 - 1 error(s), 0 warning(s) > > 12>------ Build started: Project: mod_xml_curl, Configuration: Debug Win32 > ------ > > 12>Linking... > > 12>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 13>------ Build started: Project: mod_g722, Configuration: Debug Win32 > ------ > > 13>Linking... > > 12>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\xml_int\mod_xml_curl\Debug\BuildLog.htm" > > 12>mod_xml_curl - 1 error(s), 0 warning(s) > > 13>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 13>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g722\Debug\BuildLog.htm" > > 13>mod_g722 - 1 error(s), 0 warning(s) > > 14>------ Build started: Project: mod_spidermonkey_odbc, Configuration: > Debug Win32 ------ > > 14>Linking... > > 14>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 14>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_odbc\Debug\BuildLog.htm" > > 14>mod_spidermonkey_odbc - 1 error(s), 0 warning(s) > > 15>------ Build started: Project: mod_say_en, Configuration: Debug Win32 > ------ > > 15>Linking... > > 15>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 15>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\say\mod_say_en\Debug\BuildLog.htm" > > 15>mod_say_en - 1 error(s), 0 warning(s) > > 16>------ Build started: Project: mod_spidermonkey_etpan, Configuration: > Debug Win32 ------ > > 17>------ Build started: Project: mod_xml_cdr, Configuration: Debug Win32 > ------ > > 16>Linking... > > 17>Linking... > > 16>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 17>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 17>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\xml_int\mod_xml_cdr\Debug\BuildLog.htm" > > 17>mod_xml_cdr - 1 error(s), 0 warning(s) > > 16>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_etpan\Debug\BuildLog.htm" > > 16>mod_spidermonkey_etpan - 1 error(s), 0 warning(s) > > 18>------ Build started: Project: mod_g723_1, Configuration: Debug > Passthrough Win32 ------ > > 18>Linking... > > 18>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 19>------ Build started: Project: mod_amr, Configuration: Debug > Passthrough Win32 ------ > > 19>Linking... > > 18>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g723_1\Debug > Passthrough\BuildLog.htm" > > 18>mod_g723_1 - 1 error(s), 0 warning(s) > > 19>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 20>------ Build started: Project: mod_native_file, Configuration: Debug > Win32 ------ > > 19>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_amr\Debug > Passthrough\BuildLog.htm" > > 19>mod_amr - 1 error(s), 0 warning(s) > > 20>Linking... > > 20>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 20>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\formats\mod_native_file\Debug\BuildLog.htm" > > 20>mod_native_file - 1 error(s), 0 warning(s) > > 21>------ Build started: Project: mod_h26x, Configuration: Debug Win32 > ------ > > 21>Linking... > > 22>------ Build started: Project: mod_local_stream, Configuration: Debug > Win32 ------ > > 22>Linking... > > 21>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 21>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_h26x\Debug\BuildLog.htm" > > 21>mod_h26x - 1 error(s), 0 warning(s) > > 22>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 22>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\formats\mod_local_stream\Debug\BuildLog.htm" > > 22>mod_local_stream - 1 error(s), 0 warning(s) > > 23>------ Build started: Project: mod_spidermonkey_core_db, Configuration: > Debug Win32 ------ > > 23>Linking... > > 24>------ Build started: Project: mod_spidermonkey_teletone, > Configuration: Debug Win32 ------ > > 23>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 24>Linking... > > 23>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_core_db\Debug\BuildLog.htm" > > 23>mod_spidermonkey_core_db - 1 error(s), 0 warning(s) > > 25>------ Build started: Project: mod_cdr, Configuration: Debug Win32 > ------ > > 24>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 25>Linking... > > 24>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_teletone\Debug\BuildLog.htm" > > 24>mod_spidermonkey_teletone - 1 error(s), 0 warning(s) > > 25>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 25>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_cdr\Debug\BuildLog.htm" > > 25>mod_cdr - 1 error(s), 0 warning(s) > > 26>------ Build started: Project: mod_event_socket, Configuration: Debug > Win32 ------ > > 26>Linking... > > 27>------ Build started: Project: mod_dptools, Configuration: Debug Win32 > ------ > > 27>Linking... > > 26>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 26>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_event_socket\Debug\BuildLog.htm" > > 26>mod_event_socket - 1 error(s), 0 warning(s) > > 27>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 27>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_dptools\Debug\BuildLog.htm" > > 27>mod_dptools - 1 error(s), 0 warning(s) > > 28>------ Build started: Project: mod_conference, Configuration: Debug > Win32 ------ > > 28>Linking... > > 29>------ Build started: Project: mod_rss, Configuration: Debug Win32 > ------ > > 28>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 29>Linking... > > 28>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_conference\Debug\BuildLog.htm" > > 28>mod_conference - 1 error(s), 0 warning(s) > > 29>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 29>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_rss\Debug\BuildLog.htm" > > 29>mod_rss - 1 error(s), 0 warning(s) > > 30>------ Build started: Project: mod_xml_rpc, Configuration: Debug Win32 > ------ > > 30>Linking... > > 30>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 31>------ Build started: Project: mod_console, Configuration: Debug Win32 > ------ > > 31>Linking... > > 30>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\xml_int\mod_xml_rpc\Debug\BuildLog.htm" > > 30>mod_xml_rpc - 1 error(s), 0 warning(s) > > 32>------ Build started: Project: mod_commands, Configuration: Debug Win32 > ------ > > 31>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 32>Linking... > > 31>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\loggers\mod_console\Debug\BuildLog.htm" > > 31>mod_console - 1 error(s), 0 warning(s) > > 32>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 32>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_commands\Debug\BuildLog.htm" > > 32>mod_commands - 1 error(s), 0 warning(s) > > 33>------ Build started: Project: mod_dingaling, Configuration: Debug > Win32 ------ > > 33>Linking... > > 34>------ Build started: Project: mod_ilbc, Configuration: Debug Win32 > ------ > > 34>Linking... > > 33>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 34>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 33>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_dingaling\Debug\BuildLog.htm" > > 33>mod_dingaling - 1 error(s), 0 warning(s) > > 34>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_ilbc\Debug\BuildLog.htm" > > 34>mod_ilbc - 1 error(s), 0 warning(s) > > 35>------ Skipped Build: Project: mod_perl, Configuration: Debug Win32 > ------ > > 35>Project not selected to build for this solution configuration > > 36>------ Skipped Build: Project: fs_perl, Configuration: Debug Win32 > ------ > > 36>Project not selected to build for this solution configuration > > 37>------ Skipped Build: Project: mod_cepstral, Configuration: Debug Win32 > ------ > > 37>Project not selected to build for this solution configuration > > 38>------ Build started: Project: mod_esf, Configuration: Debug Win32 > ------ > > 39>------ Build started: Project: mod_event_multicast, Configuration: > Debug Win32 ------ > > 38>Linking... > > 39>Linking... > > 38>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 39>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 38>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_esf\Debug\BuildLog.htm" > > 38>mod_esf - 1 error(s), 0 warning(s) > > 39>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_event_multicast\Debug\BuildLog.htm" > > 39>mod_event_multicast - 1 error(s), 0 warning(s) > > 40>------ Build started: Project: mod_zeroconf, Configuration: Debug Win32 > ------ > > 41>------ Build started: Project: mod_dialplan_directory, Configuration: > Debug Win32 ------ > > 40>Linking... > > 41>Linking... > > 40>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 41>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 41>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\dialplans\mod_dialplan_directory\Debug\BuildLog.htm" > > 41>mod_dialplan_directory - 1 error(s), 0 warning(s) > > 40>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_zeroconf\Debug\BuildLog.htm" > > 40>mod_zeroconf - 1 error(s), 0 warning(s) > > 42>------ Build started: Project: mod_ldap, Configuration: Debug MS-LDAP > Win32 ------ > > 43>------ Build started: Project: mod_dialplan_xml, Configuration: Debug > Win32 ------ > > 42>Linking... > > 43>Linking... > > 42>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 43>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 42>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\directories\mod_ldap\Debug > MS-LDAP\BuildLog.htm" > > 42>mod_ldap - 1 error(s), 0 warning(s) > > 43>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\dialplans\mod_dialplan_xml\Debug\BuildLog.htm" > > 43>mod_dialplan_xml - 1 error(s), 0 warning(s) > > 44>------ Build started: Project: mod_woomera, Configuration: Debug Win32 > ------ > > 44>Linking... > > 45>------ Build started: Project: mod_speex, Configuration: Debug Win32 > ------ > > 44>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 45>Linking... > > 44>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_woomera\Debug\BuildLog.htm" > > 44>mod_woomera - 1 error(s), 0 warning(s) > > 45>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 45>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_speex\Debug\BuildLog.htm" > > 45>mod_speex - 1 error(s), 0 warning(s) > > 46>------ Build started: Project: mod_softtimer, Configuration: Debug > Win32 ------ > > 46>Linking... > > 47>------ Build started: Project: mod_l16, Configuration: Debug Win32 > ------ > > 46>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 47>Linking... > > 46>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\timers\mod_softtimer\Debug\BuildLog.htm" > > 46>mod_softtimer - 1 error(s), 0 warning(s) > > 48>------ Build started: Project: mod_PortAudio, Configuration: Debug > Win32 ------ > > 47>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 48>Linking... > > 47>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_l16\Debug\BuildLog.htm" > > 47>mod_l16 - 1 error(s), 0 warning(s) > > 49>------ Build started: Project: mod_iax, Configuration: Debug Win32 > ------ > > 48>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 49>Linking... > > 48>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_portaudio\Debug\BuildLog.htm" > > 48>mod_PortAudio - 1 error(s), 0 warning(s) > > 50>------ Build started: Project: mod_g711, Configuration: Debug Win32 > ------ > > 50>Linking... > > 49>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 50>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 49>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_iax\Debug\BuildLog.htm" > > 49>mod_iax - 1 error(s), 0 warning(s) > > 50>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g711\Debug\BuildLog.htm" > > 50>mod_g711 - 1 error(s), 0 warning(s) > > 51>------ Build started: Project: mod_event_test, Configuration: Debug > Win32 ------ > > 51>Linking... > > 51>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 52>------ Build started: Project: mod_sndfile, Configuration: Debug Win32 > ------ > > 51>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_event_test\Debug\BuildLog.htm" > > 51>mod_event_test - 1 error(s), 0 warning(s) > > 52>Linking... > > 52>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 52>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\formats\mod_sndfile\Debug\BuildLog.htm" > > 52>mod_sndfile - 1 error(s), 0 warning(s) > > 53>------ Build started: Project: mod_xmpp_event, Configuration: Debug > Win32 ------ > > 53>Linking... > > 53>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 53>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_xmpp_event\Debug\BuildLog.htm" > > 53>mod_xmpp_event - 1 error(s), 0 warning(s) > > 54>------ Build started: Project: mod_gsm, Configuration: Debug Win32 > ------ > > 54>Linking... > > 54>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 54>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_gsm\Debug\BuildLog.htm" > > 54>mod_gsm - 1 error(s), 0 warning(s) > > 55>------ Build started: Project: mod_g729, Configuration: Debug > Passthrough Win32 ------ > > 55>Linking... > > 55>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 56>------ Build started: Project: mod_enum, Configuration: Debug Win32 > ------ > > 55>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g729\Debug > Passthrough\BuildLog.htm" > > 55>mod_g729 - 1 error(s), 0 warning(s) > > 56>Linking... > > 56>LINK : fatal error LNK1181: cannot open input file > '..\..\..\..\w32\library\debug\freeswitchcore.lib' > > 56>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_enum\Debug\BuildLog.htm" > > 56>mod_enum - 1 error(s), 0 warning(s) > > 57>------ Build started: Project: FreeSwitchConsole, Configuration: Debug > Win32 ------ > > 57>Linking... > > 57>LINK : fatal error LNK1181: cannot open input file > '..\library\debug\freeswitchcore.lib' > > 57>Build log was saved at > "file://c:\freeSwitch\Source\freeswitch_snapshot\w32\Console\Debug\BuildLog > FreeSwitchConsole.htm" > > 57>FreeSwitchConsole - 1 error(s), 0 warning(s) > > ========== Build: 6 succeeded, 48 failed, 25 up-to-date, 3 skipped > ========== > > Thanks > --------------------------------- > Bharath B. Reddy Bynagari > President & Co-Founder > Phone: 317.590.8275 Fax:866.807.7158 > bynagari(a)pranetinc.com > www.pranetinc.com > > > _______________________________________________ > Freeswitch-users mailing list > Freeswitch-users(a)lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > >

1 0

Re: [Freeswitch-users] freeSwitch - Windows Vista - Build errors
by Willoughby, Ian 11 Jul '07

11 Jul '07

----- Original Message ----- From: freeswitch-users-bounces(a)lists.freeswitch.org <freeswitch-users-bounces(a)lists.freeswitch.org> To: freeswitch-users(a)lists.freeswitch.org <freeswitch-users(a)lists.freeswitch.org> Sent: Tue Jul 10 18:57:28 2007 Subject: [Freeswitch-users] freeSwitch - Windows Vista - Build errors Hi, I am trying to build the code in Microfost VC++. I am getting these erros. Can somebody help me? Its been 6 years since I coded in VC++. 1>------ Build started: Project: libapr, Configuration: Debug Win32 ------ 2>------ Build started: Project: libpcre Generate pcre_chartables.c, Configuration: Debug Win32 ------ 2>Compiling... 1>Performing Pre-Build Event... 1>0 File(s) copied 1>Linking... 2>dftables.c 2>Linking... 2>Embedding manifest... 1> Creating library .\Debug/libapr-1.lib and object .\Debug/libapr-1.exp 2>Performing Post-Build Event... 1>filestat.obj : error LNK2019: unresolved external symbol __imp__AllocateAndInitializeSid@44 referenced in function _resolve_prot 1>filestat.obj : error LNK2019: unresolved external symbol __imp__FreeSid@4 referenced in function _free_world 1>rand.obj : error LNK2019: unresolved external symbol __imp__CryptReleaseContext@8 referenced in function _apr_generate_random_bytes@8 1>rand.obj : error LNK2019: unresolved external symbol __imp__CryptGenRandom@12 referenced in function _apr_generate_random_bytes@8 1>rand.obj : error LNK2019: unresolved external symbol __imp__CryptAcquireContextA@20 referenced in function _apr_generate_random_bytes@8 1>proc.obj : error LNK2019: unresolved external symbol __imp__SetSecurityDescriptorDacl@16 referenced in function _apr_procattr_user_set@12 1>proc.obj : error LNK2019: unresolved external symbol __imp__InitializeSecurityDescriptor@8 referenced in function _apr_procattr_user_set@12 1>proc.obj : error LNK2019: unresolved external symbol __imp__DuplicateTokenEx@24 referenced in function _apr_procattr_user_set@12 1>proc.obj : error LNK2019: unresolved external symbol __imp__LogonUserW@24 referenced in function _apr_procattr_user_set@12 1>proc.obj : error LNK2019: unresolved external symbol __imp__RevertToSelf@0 referenced in function _apr_proc_create@24 1>proc.obj : error LNK2019: unresolved external symbol __imp__CreateProcessAsUserW@44 referenced in function _apr_proc_create@24 1>proc.obj : error LNK2019: unresolved external symbol __imp__ImpersonateLoggedOnUser@4 referenced in function _apr_proc_create@24 1>groupinfo.obj : error LNK2019: unresolved external symbol __imp__LookupAccountNameA@28 referenced in function _apr_gid_get@12 1>userinfo.obj : error LNK2001: unresolved external symbol __imp__LookupAccountNameA@28 1>groupinfo.obj : error LNK2019: unresolved external symbol __imp__LookupAccountSidA@28 referenced in function _apr_gid_name_get@12 1>userinfo.obj : error LNK2001: unresolved external symbol __imp__LookupAccountSidA@28 1>groupinfo.obj : error LNK2019: unresolved external symbol __imp__EqualSid@8 referenced in function _apr_gid_compare@8 1>userinfo.obj : error LNK2001: unresolved external symbol __imp__EqualSid@8 1>groupinfo.obj : error LNK2019: unresolved external symbol __imp__IsValidSid@4 referenced in function _apr_gid_compare@8 1>userinfo.obj : error LNK2001: unresolved external symbol __imp__IsValidSid@4 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__GetSidSubAuthority@8 referenced in function _get_sid_string 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__GetSidSubAuthorityCount@4 referenced in function _get_sid_string 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__GetSidIdentifierAuthority@4 referenced in function _get_sid_string 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__RegQueryValueExA@24 referenced in function _apr_uid_homepath_get@12 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__RegCloseKey@4 referenced in function _apr_uid_homepath_get@12 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__RegQueryValueExW@24 referenced in function _apr_uid_homepath_get@12 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__RegOpenKeyExA@20 referenced in function _apr_uid_homepath_get@12 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__GetTokenInformation@20 referenced in function _apr_uid_current@12 1>userinfo.obj : error LNK2019: unresolved external symbol __imp__OpenProcessToken@12 referenced in function _apr_uid_current@12 1>C:\freeSwitch\Source\freeswitch_snapshot\Debug\libapr.dll : fatal error LNK1120: 25 unresolved externals 1>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\apr\Debug\BuildLog.htm" 1>libapr - 30 error(s), 0 warning(s) 3>------ Build started: Project: libapriconv, Configuration: Debug Win32 ------ 3>Performing Pre-Build Event... 3>0 File(s) copied 3>Linking... 2>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\pcre\Debug\BuildLog.htm" 2>libpcre Generate pcre_chartables.c - 0 error(s), 0 warning(s) 3> Creating library .\Debug/libapriconv-1.lib and object .\Debug/libapriconv-1.exp 4>------ Build started: Project: libpcre, Configuration: Debug Win32 ------ 4>libpcre : warning PRJ0009 : Build log could not be opened for writing. 4>Make sure that the file is not open by another process and is not write-protected. 4>Compiling... 3>Embedding manifest... 4>pcre_chartables.c 4>Creating library... 4>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\pcre\Debug\BuildLog.htm" 4>libpcre - 0 error(s), 1 warning(s) 3>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\apr-iconv\Debug\BuildLog.htm" 3>libapriconv - 0 error(s), 0 warning(s) 5>------ Build started: Project: libaprutil, Configuration: Debug Win32 ------ 5>Performing Pre-Build Event... 6>------ Build started: Project: js, Configuration: Debug Win32 ------ 6>Performing Pre-Build Event... 5>0 File(s) copied 6>Embedding manifest... 5>Compiling... 5>xlate.c 6>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\js\Debug\BuildLog.htm" 6>js - 0 error(s), 0 warning(s) 5>apr_uri.c 7>------ Build started: Project: libetpan, Configuration: Debug Win32 ------ 7>Embedding manifest... 5>apr_strmatch.c 7>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\etpan\Debug\BuildLog.htm" 7>libetpan - 0 error(s), 0 warning(s) 5>sdbm_pair.c 5>sdbm_lock.c 5>sdbm_hash.c 5>sdbm.c 5>apr_rmm.c 5>apr_reslist.c 5>apr_queue.c 5>apr_date.c 5>apr_ldap_url.c 5>apr_ldap_option.c 5>apr_ldap_init.c 5>apr_hooks.c 5>apr_base64.c 5>apr_dbm_sdbm.c 5>apr_dbm_gdbm.c 5>apr_dbm_berkeleydb.c 5>apr_dbm.c 5>Generating Code... 5>Compiling... 5>apr_dbd_sqlite3.c 5>apr_dbd_sqlite2.c 5>apr_dbd_pgsql.c 5>apr_dbd.c 5>uuid.c 5>getuuid.c 5>apr_sha1.c 5>apr_md5.c 5>apr_md4.c 5>apr_buckets_socket.c 5>apr_buckets_simple.c 5>apr_buckets_refcount.c 5>apr_buckets_pool.c 5>apr_buckets_pipe.c 5>apr_buckets_mmap.c 5>apr_buckets_heap.c 5>apr_buckets_flush.c 5>apr_buckets_file.c 5>apr_buckets_eos.c 5>apr_buckets_alloc.c 5>Generating Code... 5>Compiling... 5>apr_buckets.c 5>apr_brigade.c 5>Generating Code... 5>Linking... 5> Creating library .\Debug/libaprutil-1.lib and object .\Debug/libaprutil-1.exp 5>Embedding manifest... 5>Performing Post-Build Event... 5>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\libs\win32\apr-util\Debug\BuildLog.htm" 5>libaprutil - 0 error(s), 0 warning(s) 8>------ Build started: Project: FreeSwitchCoreLib, Configuration: Debug Win32 ------ 8>Compiling... 8>switch_ivr_play_say.c 8>..\..\src\switch_ivr_play_say.c(945) : error C2220: warning treated as error - no 'object' file generated 8>..\..\src\switch_ivr_play_say.c(945) : warning C4244: '=' : conversion from 'switch_size_t' to 'uint32_t', possible loss of data 8>..\..\src\switch_ivr_play_say.c(948) : warning C4244: '=' : conversion from 'switch_size_t' to 'uint32_t', possible loss of data 8>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\w32\Library\Debug\BuildLog FreeSwitchCoreLib.htm" 8>FreeSwitchCoreLib - 1 error(s), 2 warning(s) 9>------ Build started: Project: mod_spidermonkey, Configuration: Debug Win32 ------ 10>------ Build started: Project: mod_sofia, Configuration: Debug Win32 ------ 9>Linking... 10>Linking... 9>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 9>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey\Debug\BuildLog.htm" 9>mod_spidermonkey - 1 error(s), 0 warning(s) 10>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 10>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_sofia\Debug\BuildLog.htm" 10>mod_sofia - 1 error(s), 0 warning(s) 11>------ Build started: Project: mod_g726, Configuration: Debug Win32 ------ 11>Linking... 11>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 11>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g726\Debug\BuildLog.htm" 11>mod_g726 - 1 error(s), 0 warning(s) 12>------ Build started: Project: mod_xml_curl, Configuration: Debug Win32 ------ 12>Linking... 12>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 13>------ Build started: Project: mod_g722, Configuration: Debug Win32 ------ 13>Linking... 12>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\xml_int\mod_xml_curl\Debug\BuildLog.htm" 12>mod_xml_curl - 1 error(s), 0 warning(s) 13>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 13>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g722\Debug\BuildLog.htm" 13>mod_g722 - 1 error(s), 0 warning(s) 14>------ Build started: Project: mod_spidermonkey_odbc, Configuration: Debug Win32 ------ 14>Linking... 14>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 14>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_odbc\Debug\BuildLog.htm" 14>mod_spidermonkey_odbc - 1 error(s), 0 warning(s) 15>------ Build started: Project: mod_say_en, Configuration: Debug Win32 ------ 15>Linking... 15>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 15>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\say\mod_say_en\Debug\BuildLog.htm" 15>mod_say_en - 1 error(s), 0 warning(s) 16>------ Build started: Project: mod_spidermonkey_etpan, Configuration: Debug Win32 ------ 17>------ Build started: Project: mod_xml_cdr, Configuration: Debug Win32 ------ 16>Linking... 17>Linking... 16>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 17>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 17>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\xml_int\mod_xml_cdr\Debug\BuildLog.htm" 17>mod_xml_cdr - 1 error(s), 0 warning(s) 16>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_etpan\Debug\BuildLog.htm" 16>mod_spidermonkey_etpan - 1 error(s), 0 warning(s) 18>------ Build started: Project: mod_g723_1, Configuration: Debug Passthrough Win32 ------ 18>Linking... 18>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 19>------ Build started: Project: mod_amr, Configuration: Debug Passthrough Win32 ------ 19>Linking... 18>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g723_1\Debug Passthrough\BuildLog.htm" 18>mod_g723_1 - 1 error(s), 0 warning(s) 19>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 20>------ Build started: Project: mod_native_file, Configuration: Debug Win32 ------ 19>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_amr\Debug Passthrough\BuildLog.htm" 19>mod_amr - 1 error(s), 0 warning(s) 20>Linking... 20>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 20>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\formats\mod_native_file\Debug\BuildLog.htm" 20>mod_native_file - 1 error(s), 0 warning(s) 21>------ Build started: Project: mod_h26x, Configuration: Debug Win32 ------ 21>Linking... 22>------ Build started: Project: mod_local_stream, Configuration: Debug Win32 ------ 22>Linking... 21>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 21>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_h26x\Debug\BuildLog.htm" 21>mod_h26x - 1 error(s), 0 warning(s) 22>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 22>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\formats\mod_local_stream\Debug\BuildLog.htm" 22>mod_local_stream - 1 error(s), 0 warning(s) 23>------ Build started: Project: mod_spidermonkey_core_db, Configuration: Debug Win32 ------ 23>Linking... 24>------ Build started: Project: mod_spidermonkey_teletone, Configuration: Debug Win32 ------ 23>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 24>Linking... 23>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_core_db\Debug\BuildLog.htm" 23>mod_spidermonkey_core_db - 1 error(s), 0 warning(s) 25>------ Build started: Project: mod_cdr, Configuration: Debug Win32 ------ 24>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 25>Linking... 24>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\languages\mod_spidermonkey_teletone\Debug\BuildLog.htm" 24>mod_spidermonkey_teletone - 1 error(s), 0 warning(s) 25>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 25>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_cdr\Debug\BuildLog.htm" 25>mod_cdr - 1 error(s), 0 warning(s) 26>------ Build started: Project: mod_event_socket, Configuration: Debug Win32 ------ 26>Linking... 27>------ Build started: Project: mod_dptools, Configuration: Debug Win32 ------ 27>Linking... 26>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 26>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_event_socket\Debug\BuildLog.htm" 26>mod_event_socket - 1 error(s), 0 warning(s) 27>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 27>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_dptools\Debug\BuildLog.htm" 27>mod_dptools - 1 error(s), 0 warning(s) 28>------ Build started: Project: mod_conference, Configuration: Debug Win32 ------ 28>Linking... 29>------ Build started: Project: mod_rss, Configuration: Debug Win32 ------ 28>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 29>Linking... 28>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_conference\Debug\BuildLog.htm" 28>mod_conference - 1 error(s), 0 warning(s) 29>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 29>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_rss\Debug\BuildLog.htm" 29>mod_rss - 1 error(s), 0 warning(s) 30>------ Build started: Project: mod_xml_rpc, Configuration: Debug Win32 ------ 30>Linking... 30>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 31>------ Build started: Project: mod_console, Configuration: Debug Win32 ------ 31>Linking... 30>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\xml_int\mod_xml_rpc\Debug\BuildLog.htm" 30>mod_xml_rpc - 1 error(s), 0 warning(s) 32>------ Build started: Project: mod_commands, Configuration: Debug Win32 ------ 31>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 32>Linking... 31>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\loggers\mod_console\Debug\BuildLog.htm" 31>mod_console - 1 error(s), 0 warning(s) 32>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 32>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_commands\Debug\BuildLog.htm" 32>mod_commands - 1 error(s), 0 warning(s) 33>------ Build started: Project: mod_dingaling, Configuration: Debug Win32 ------ 33>Linking... 34>------ Build started: Project: mod_ilbc, Configuration: Debug Win32 ------ 34>Linking... 33>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 34>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 33>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_dingaling\Debug\BuildLog.htm" 33>mod_dingaling - 1 error(s), 0 warning(s) 34>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_ilbc\Debug\BuildLog.htm" 34>mod_ilbc - 1 error(s), 0 warning(s) 35>------ Skipped Build: Project: mod_perl, Configuration: Debug Win32 ------ 35>Project not selected to build for this solution configuration 36>------ Skipped Build: Project: fs_perl, Configuration: Debug Win32 ------ 36>Project not selected to build for this solution configuration 37>------ Skipped Build: Project: mod_cepstral, Configuration: Debug Win32 ------ 37>Project not selected to build for this solution configuration 38>------ Build started: Project: mod_esf, Configuration: Debug Win32 ------ 39>------ Build started: Project: mod_event_multicast, Configuration: Debug Win32 ------ 38>Linking... 39>Linking... 38>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 39>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 38>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_esf\Debug\BuildLog.htm" 38>mod_esf - 1 error(s), 0 warning(s) 39>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_event_multicast\Debug\BuildLog.htm" 39>mod_event_multicast - 1 error(s), 0 warning(s) 40>------ Build started: Project: mod_zeroconf, Configuration: Debug Win32 ------ 41>------ Build started: Project: mod_dialplan_directory, Configuration: Debug Win32 ------ 40>Linking... 41>Linking... 40>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 41>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 41>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\dialplans\mod_dialplan_directory\Debug\BuildLog.htm" 41>mod_dialplan_directory - 1 error(s), 0 warning(s) 40>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_zeroconf\Debug\BuildLog.htm" 40>mod_zeroconf - 1 error(s), 0 warning(s) 42>------ Build started: Project: mod_ldap, Configuration: Debug MS-LDAP Win32 ------ 43>------ Build started: Project: mod_dialplan_xml, Configuration: Debug Win32 ------ 42>Linking... 43>Linking... 42>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 43>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 42>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\directories\mod_ldap\Debug MS-LDAP\BuildLog.htm" 42>mod_ldap - 1 error(s), 0 warning(s) 43>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\dialplans\mod_dialplan_xml\Debug\BuildLog.htm" 43>mod_dialplan_xml - 1 error(s), 0 warning(s) 44>------ Build started: Project: mod_woomera, Configuration: Debug Win32 ------ 44>Linking... 45>------ Build started: Project: mod_speex, Configuration: Debug Win32 ------ 44>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 45>Linking... 44>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_woomera\Debug\BuildLog.htm" 44>mod_woomera - 1 error(s), 0 warning(s) 45>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 45>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_speex\Debug\BuildLog.htm" 45>mod_speex - 1 error(s), 0 warning(s) 46>------ Build started: Project: mod_softtimer, Configuration: Debug Win32 ------ 46>Linking... 47>------ Build started: Project: mod_l16, Configuration: Debug Win32 ------ 46>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 47>Linking... 46>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\timers\mod_softtimer\Debug\BuildLog.htm" 46>mod_softtimer - 1 error(s), 0 warning(s) 48>------ Build started: Project: mod_PortAudio, Configuration: Debug Win32 ------ 47>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 48>Linking... 47>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_l16\Debug\BuildLog.htm" 47>mod_l16 - 1 error(s), 0 warning(s) 49>------ Build started: Project: mod_iax, Configuration: Debug Win32 ------ 48>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 49>Linking... 48>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_portaudio\Debug\BuildLog.htm" 48>mod_PortAudio - 1 error(s), 0 warning(s) 50>------ Build started: Project: mod_g711, Configuration: Debug Win32 ------ 50>Linking... 49>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 50>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 49>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\endpoints\mod_iax\Debug\BuildLog.htm" 49>mod_iax - 1 error(s), 0 warning(s) 50>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g711\Debug\BuildLog.htm" 50>mod_g711 - 1 error(s), 0 warning(s) 51>------ Build started: Project: mod_event_test, Configuration: Debug Win32 ------ 51>Linking... 51>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 52>------ Build started: Project: mod_sndfile, Configuration: Debug Win32 ------ 51>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_event_test\Debug\BuildLog.htm" 51>mod_event_test - 1 error(s), 0 warning(s) 52>Linking... 52>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 52>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\formats\mod_sndfile\Debug\BuildLog.htm" 52>mod_sndfile - 1 error(s), 0 warning(s) 53>------ Build started: Project: mod_xmpp_event, Configuration: Debug Win32 ------ 53>Linking... 53>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 53>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\event_handlers\mod_xmpp_event\Debug\BuildLog.htm" 53>mod_xmpp_event - 1 error(s), 0 warning(s) 54>------ Build started: Project: mod_gsm, Configuration: Debug Win32 ------ 54>Linking... 54>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 54>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_gsm\Debug\BuildLog.htm" 54>mod_gsm - 1 error(s), 0 warning(s) 55>------ Build started: Project: mod_g729, Configuration: Debug Passthrough Win32 ------ 55>Linking... 55>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 56>------ Build started: Project: mod_enum, Configuration: Debug Win32 ------ 55>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\codecs\mod_g729\Debug Passthrough\BuildLog.htm" 55>mod_g729 - 1 error(s), 0 warning(s) 56>Linking... 56>LINK : fatal error LNK1181: cannot open input file '..\..\..\..\w32\library\debug\freeswitchcore.lib' 56>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\src\mod\applications\mod_enum\Debug\BuildLog.htm" 56>mod_enum - 1 error(s), 0 warning(s) 57>------ Build started: Project: FreeSwitchConsole, Configuration: Debug Win32 ------ 57>Linking... 57>LINK : fatal error LNK1181: cannot open input file '..\library\debug\freeswitchcore.lib' 57>Build log was saved at "file://c:\freeSwitch\Source\freeswitch_snapshot\w32\Console\Debug\BuildLog FreeSwitchConsole.htm" 57>FreeSwitchConsole - 1 error(s), 0 warning(s) ========== Build: 6 succeeded, 48 failed, 25 up-to-date, 3 skipped ========== Thanks --------------------------------- Bharath B. Reddy Bynagari President & Co-Founder Phone: 317.590.8275 Fax:866.807.7158 bynagari(a)pranetinc.com www.pranetinc.com

1 0