Hi, I am trying to configure Sangoma A101DE card with Bharati Airtel (India) PRI Line. Here is the output of "wanrouter status" Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 16 | 4 | 1 | N/A | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected | I have configured the card with following settings. Clock = Normal SwitchType = EuroISDN/ETSI Signalling = PRI NET Dialplan Context = Public DTMF Detection = Yes Hardware Fax Detection = No Freeswitch recognized the card and here is the output of ftdm list +OK span: 1 (wp1) type: Sangoma (ISDN) physical_status: ok signaling_status: UP chan_count: 31 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options: none I am stuck here. I don't receive any incoming calls and get a busy message when we dial our main DID no. Please tell me where I am going wrong? Thanks, Ryan.
On Mon, Dec 5, 2011 at 10:52 PM, Ryan V <ryan@kaevee.com> wrote:
Freeswitch recognized the card and here is the output of ftdm list
+OK span: 1 (wp1) type: Sangoma (ISDN) physical_status: ok signaling_status: UP chan_count: 31 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options: none
I am stuck here. I don't receive any incoming calls and get a busy message when we dial our main DID no.
Please tell me where I am going wrong?
That looks pretty good to me. Try enabling all debugging output. You can also try to trace the d-channel and dump it to a pcap file to see if you receive any messages from the telco indicating a new call. http://wiki.sangoma.com/wanpipe-wireshark-pcap-pri-bri-wan-t1-e1-tracing What about outgoing calls? *Moises Silva **Software Engineer, Development Manager*** msilva@sangoma.com Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 **<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products<http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Solutions<http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Events<http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Contact<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Wiki<http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Facebook<http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Twitter<http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`| | YouTube<http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> VegaStream is now part of Sangoma!<http://sangoma.com/about_us/newsroom/news_releases/news/1488795/Sangoma_Acquires_All_Key_Assets_of_VegaStream.html> Ask us about both Gateway Appliances<http://sangoma.com/products/media_gateways/vega.html> and Internal Gateways<http://sangoma.com/products/software_products/netborder_suite/netborder_express.html>
On Tue, Dec 6, 2011 at 10:20 PM, Moises Silva <moises.silva@gmail.com>wrote:
On Mon, Dec 5, 2011 at 10:52 PM, Ryan V <ryan@kaevee.com> wrote:
Freeswitch recognized the card and here is the output of ftdm list
+OK span: 1 (wp1) type: Sangoma (ISDN) physical_status: ok signaling_status: UP chan_count: 31 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options: none
I am stuck here. I don't receive any incoming calls and get a busy message when we dial our main DID no.
Please tell me where I am going wrong?
That looks pretty good to me. Try enabling all debugging output. You can also try to trace the d-channel and dump it to a pcap file to see if you receive any messages from the telco indicating a new call.
http://wiki.sangoma.com/wanpipe-wireshark-pcap-pri-bri-wan-t1-e1-tracing
What about outgoing calls?
I made a stupid mistake of connecting to our existing EPABX instead of connecting to modem :( I figured it out couple of hours back.. and connected it to our Telco modem. I am now receiving the calls. As I am totally newbie to FreeSwitch or soft PBX, I have to figure out how to setup outgoing calls :) In fact, I was about to write to list and update my email soon. Thanks, Venkatesh K
participants (2)
-
Moises Silva
-
Ryan V