Hi, I am trying to configure Sangoma A101DE card with Bharati Airtel (India) PRI Line. Here is the output of "wanrouter status" Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 16 | 4 | 1 | N/A | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected | I have configured the card with following settings. Clock = Normal SwitchType = EuroISDN/ETSI Signalling = PRI NET Dialplan Context = Public DTMF Detection = Yes Hardware Fax Detection = No Freeswitch recognized the card and here is the output of ftdm list +OK span: 1 (wp1) type: Sangoma (ISDN) physical_status: ok signaling_status: UP chan_count: 31 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options: none I am stuck here. I don't receive any incoming calls and get a busy message when we dial our main DID no. Please tell me where I am going wrong? Thanks, Ryan.