On Mon, Dec 5, 2011 at 10:52 PM, Ryan V <ryan@kaevee.com> wrote:

Freeswitch recognized the card and here is the output of ftdm list

+OK
span: 1 (wp1)
type: Sangoma (ISDN)
physical_status: ok
signaling_status: UP
chan_count: 31
dialplan: XML
context: public
dial_regex:
fail_dial_regex:
hold_music:
analog_options: none

I am stuck here. I don't receive any incoming calls and get a busy message when we dial our main DID no.

Please tell me where I am going wrong?

That looks pretty good to me. Try enabling all debugging output. You can also try to trace the d-channel and dump it to a pcap file to see if you receive any messages from the telco indicating a new call.

http://wiki.sangoma.com/wanpipe-wireshark-pcap-pri-bri-wan-t1-e1-tracing

What about outgoing calls?

Moises Silva
Software Engineer, Development Manager

msilva@sangoma.com

Sangoma Technologies

100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada

t. +1 800 388 2475 (N. America)

t. +1 905 474 1990 x128

f. +1 905 474 9223

VegaStream is now part of Sangoma!

Ask us about both Gateway Appliances and Internal Gateways