[span wanpipe wp1] trunk_type => e1 group=dialGrp1 b-channel => 2:1-15 b-channel => 2:17-31 d-channel => 2:16 [span wanpipe wp2] trunk_type => e1 group=dialGrp1 b-channel => 1:1-15 b-channel => 1:17-31 d-channel => 1:16 freetdm/dialGrp1/*a*/xxxxx initiates call from channel 1 of span 2 i.e. (2:1) freetdm/dialGrp1/*A/*xxxxx initiates call from channel 31 of span 2 i.e. (2:31).. but i was expecting it to be 31st channel of Span1. Also 2nd question in above config all calls are going through wp1(span2) only.. even if i initiate more than 30 calls simultaneously.. no call goes to wp2(span 1) Can anyone please help how can i make ascending/descending channel utilization using one single group across both above spans.. Thanks a lot.. FS Rocks.