[span wanpipe wp1]
trunk_type => e1
group=dialGrp1
b-channel => 2:1-15
b-channel => 2:17-31
d-channel => 2:16
[span wanpipe wp2]
trunk_type => e1
group=dialGrp1
b-channel => 1:1-15
b-channel => 1:17-31
d-channel => 1:16
freetdm/dialGrp1/
a/xxxxx initiates call from channel 1 of span 2 i.e. (2:1)
freetdm/dialGrp1/
A/xxxxx initiates call from channel 31 of span 2 i.e. (2:31).. but i was expecting it to be 31st channel of Span1.
Also 2nd question in above config all calls are going through wp1(span2) only.. even if i initiate more than 30 calls simultaneously.. no call goes to wp2(span 1)
Can anyone please help how can i make ascending/descending channel utilization using one single group across both above spans..
Thanks a lot..