Evan ... Thank you very much. Yes remove the port number solve my registration. Even polycom tech support could not help to solve the problem last two days. -- Vik , I trust your statement. Thank you for the help. I did not think port number is making this much of problem. Yes .. your configuration do not have port number and it is correct. Thanks again. Thanks and regards, Lloyd On Wed, Nov 2, 2011 at 8:11 PM, Evan P. Hall <evan@corpwest.com> wrote:
It will not look up the NAPTR or SRV records at all since you have specified port 5060. Don’t specify the port number and it should work. * ***
** **
We run a large number of polycom phones without NAPTR records here. However we don’t use the outboundProxy attributes at all. We use voIpProt.server.x.address or the phone’s reg.x.server.x.address to tell the phones where to register. You shouldn’t need to specify outboundProxy unless you need your signaling packets to go to a different server than the registration.****
** **
-Evan****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Lloyd Aloysius *Sent:* Tuesday, November 01, 2011 6:23 AM *To:* FreeSWITCH Users Help
*Subject:* Re: [Freeswitch-users] FreeSWITCH - Polycom and DNS SRV****
** **
Brian,****
** **
Thank you for the reply. I set the voIpProt.SIP.transport="DNSnaptr"****
** **
** **
<SIP voIpProt.SIP.sdpNewType="0" voIpProt.SIP.tcpEnabled="0">****
<outboundProxy****
voIpProt.SIP.outboundProxy.address="sip.mydomain.com"****
voIpProt.SIP.transport="DNSnaptr"****
voIpProt.SIP.outboundProxy.port="5060 />****
</SIP>****
** **
But this fails to register.****
Thanks****
Lloyd****
** **
On Tue, Nov 1, 2011 at 9:11 AM, Brian West <brian@freeswitch.org> wrote:** **
I'm going to guess you have not set voIpProt.server.x.transport="DNSnaptr" and you're missing NAPTR records too.****
** **
/b****
** **
On Nov 1, 2011, at 7:48 AM, Lloyd Aloysius wrote:****
** **
Hi ,
I am testing the Polycom Phones [IP335,IP450 and IP6000] and DNS SRV records. All my DNS SRV records and other phone models [Cisico , Asstra, Yealink] working without any issue.
But for Polycom Phones .. I need to specify the "Outbound Proxy" as IP address otherwise phone never register.****
* voIpProt.SIP.outboundProxy.address="IP ADDRESS"*****
I could not find why we need to specify "Outbound Proxy? How to avoid using IP address?
Does Polycom phones fully support DNS SRV records?
Any help is appreciated.
Thanks and regards,
Lloyd****
** **
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****
** **
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org