Evan ... Thank you very much. Yes remove the port number solve my registration.

Even polycom tech support could not help to solve the problem last two days. 

--

Vik , I trust your statement. Thank you for the help. I did not think port number is making this much of problem. Yes .. your configuration do not have port number and it is correct.

Thanks again.


Thanks and regards,

Lloyd



On Wed, Nov 2, 2011 at 8:11 PM, Evan P. Hall <evan@corpwest.com> wrote:

It will not look up the NAPTR or SRV records at all since you have specified port 5060.  Don’t specify the port number and it should work. 

 

We run a large number of polycom phones without NAPTR records here.  However we don’t use the outboundProxy attributes at all.  We use voIpProt.server.x.address or the phone’s reg.x.server.x.address to tell the phones where to register.  You shouldn’t need to specify outboundProxy unless you need your signaling packets to go to a different server than the registration.

 

-Evan

 

From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Lloyd Aloysius
Sent: Tuesday, November 01, 2011 6:23 AM
To: FreeSWITCH Users Help


Subject: Re: [Freeswitch-users] FreeSWITCH - Polycom and DNS SRV

 

Brian,

 

Thank you for the reply. I set the  voIpProt.SIP.transport="DNSnaptr"

 

 

  <SIP voIpProt.SIP.sdpNewType="0" voIpProt.SIP.tcpEnabled="0">

      <outboundProxy

         voIpProt.SIP.outboundProxy.address="sip.mydomain.com"

                voIpProt.SIP.transport="DNSnaptr"

                voIpProt.SIP.outboundProxy.port="5060 />

   </SIP>

 

But this fails to register.


Thanks

Lloyd

 

On Tue, Nov 1, 2011 at 9:11 AM, Brian West <brian@freeswitch.org> wrote:

I'm going to guess you have not set voIpProt.server.x.transport="DNSnaptr"  and you're missing NAPTR records too.

 

/b

 

On Nov 1, 2011, at 7:48 AM, Lloyd Aloysius wrote:

 

Hi ,

I am testing the Polycom Phones [IP335,IP450 and IP6000] and DNS SRV
records. All my DNS SRV records and other phone models [Cisico , Asstra,
Yealink]  working without any issue.

But for Polycom Phones .. I need to specify the "Outbound Proxy" as IP
address otherwise phone never register.

* voIpProt.SIP.outboundProxy.address="IP ADDRESS"*



I could not find why we need to specify "Outbound Proxy? How to avoid
using IP address?

Does Polycom phones fully support DNS SRV records?

Any help is appreciated.



Thanks and regards,

Lloyd

 



FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org

 



FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org