Hi , I am testing the Polycom Phones [IP335,IP450 and IP6000] and DNS SRV records. All my DNS SRV records and other phone models [Cisico , Asstra, Yealink] working without any issue. But for Polycom Phones .. I need to specify the "Outbound Proxy" as IP address otherwise phone never register. * voIpProt.SIP.outboundProxy.address="IP ADDRESS"* I could not find why we need to specify "Outbound Proxy? How to avoid using IP address? Does Polycom phones fully support DNS SRV records? Any help is appreciated. Thanks and regards, Lloyd
I'm going to guess you have not set voIpProt.server.x.transport="DNSnaptr" and you're missing NAPTR records too. /b On Nov 1, 2011, at 7:48 AM, Lloyd Aloysius wrote:
Hi ,
I am testing the Polycom Phones [IP335,IP450 and IP6000] and DNS SRV records. All my DNS SRV records and other phone models [Cisico , Asstra, Yealink] working without any issue.
But for Polycom Phones .. I need to specify the "Outbound Proxy" as IP address otherwise phone never register.
* voIpProt.SIP.outboundProxy.address="IP ADDRESS"*
I could not find why we need to specify "Outbound Proxy? How to avoid using IP address?
Does Polycom phones fully support DNS SRV records?
Any help is appreciated.
Thanks and regards,
Lloyd
Brian, Thank you for the reply. I set the voIpProt.SIP.transport="DNSnaptr" <SIP voIpProt.SIP.sdpNewType="0" voIpProt.SIP.tcpEnabled="0"> <outboundProxy voIpProt.SIP.outboundProxy.address="sip.mydomain.com" voIpProt.SIP.transport="DNSnaptr" voIpProt.SIP.outboundProxy.port="5060 /> </SIP> But this fails to register. Thanks Lloyd On Tue, Nov 1, 2011 at 9:11 AM, Brian West <brian@freeswitch.org> wrote:
I'm going to guess you have not set voIpProt.server.x.transport="DNSnaptr" and you're missing NAPTR records too.
/b
On Nov 1, 2011, at 7:48 AM, Lloyd Aloysius wrote:
Hi ,
I am testing the Polycom Phones [IP335,IP450 and IP6000] and DNS SRV records. All my DNS SRV records and other phone models [Cisico , Asstra, Yealink] working without any issue.
But for Polycom Phones .. I need to specify the "Outbound Proxy" as IP address otherwise phone never register.
* voIpProt.SIP.outboundProxy.address="IP ADDRESS"*
I could not find why we need to specify "Outbound Proxy? How to avoid using IP address?
Does Polycom phones fully support DNS SRV records?
Any help is appreciated.
Thanks and regards,
Lloyd
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ok you missed the part about the NAPTR records didn't you? Make sure you setup your NAPTR records correctly. I really don't get how people think they are optional. I know this says optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_.... but they aren't. /b On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote:
But this fails to register.
Thanks Lloyd
Thank you for the reply . I miss the NAPTR records. Let me setup the NAPTR records and test again. Thanks and regards, Lloyd * <http://www.sunteltech.ca/blog/>* On Tue, Nov 1, 2011 at 9:27 AM, Brian West <brian@freeswitch.org> wrote:
Ok you missed the part about the NAPTR records didn't you? Make sure you setup your NAPTR records correctly. I really don't get how people think they are optional.
I know this says optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_....
but they aren't.
/b
On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote:
But this fails to register.
Thanks Lloyd
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I have Polycoms working with DNS SRV without NAPTR records It was a matter of polycom provisioning files. I attached the 2 important files and that last important file named polycom_0004f21a0e87.cfg looks like this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <phone1> <reg reg.1.displayName="Test UA" reg.1.address="1001" reg.1.label="Test UA" reg.1.type="private" reg.1.auth.userId="1001" reg.1.auth.password="PASSWORD" reg.1.server.1.address="mypbx.mydomain.com" /> </phone1> On Tue, Nov 1, 2011 at 10:13 AM, Lloyd Aloysius <lloyd.aloysius@sunteltech.ca> wrote:
Thank you for the reply . I miss the NAPTR records. Let me setup the NAPTR records and test again. Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 9:27 AM, Brian West <brian@freeswitch.org> wrote:
Ok you missed the part about the NAPTR records didn't you? Make sure you setup your NAPTR records correctly. I really don't get how people think they are optional. I know this says optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_.... but they aren't. /b On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote:
But this fails to register.
Thanks Lloyd
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Vik, I have the same setting in my configuration files. But the phone never register. I will follow the Brian instructions [create NAPTR Records] shortly. Thanks Lloyd On Tue, Nov 1, 2011 at 10:46 AM, Vik Killa <vipkilla@gmail.com> wrote:
I have Polycoms working with DNS SRV without NAPTR records It was a matter of polycom provisioning files. I attached the 2 important files and that last important file named polycom_0004f21a0e87.cfg looks like this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <phone1> <reg reg.1.displayName="Test UA" reg.1.address="1001" reg.1.label="Test UA" reg.1.type="private" reg.1.auth.userId="1001" reg.1.auth.password="PASSWORD" reg.1.server.1.address="mypbx.mydomain.com" /> </phone1>
On Tue, Nov 1, 2011 at 10:13 AM, Lloyd Aloysius <lloyd.aloysius@sunteltech.ca> wrote:
Thank you for the reply . I miss the NAPTR records. Let me setup the NAPTR records and test again. Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 9:27 AM, Brian West <brian@freeswitch.org> wrote:
Ok you missed the part about the NAPTR records didn't you? Make sure
you
setup your NAPTR records correctly. I really don't get how people think they are optional. I know this says optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_.... but they aren't. /b On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote:
But this fails to register.
Thanks Lloyd
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
DynDns not supporting NAPTR. I received reply from them "We do not support NAPTR records."I am currently using DynDns for my DNS needs. Any other recommendation to make Polycom phone work with DNS SRV records without NAPTR records. Thanks and regards, Lloyd On Tue, Nov 1, 2011 at 4:57 PM, Lloyd Aloysius <lloyd.aloysius@gmail.com>wrote:
Vik,
I have the same setting in my configuration files. But the phone never register. I will follow the Brian instructions [create NAPTR Records] shortly.
Thanks Lloyd
On Tue, Nov 1, 2011 at 10:46 AM, Vik Killa <vipkilla@gmail.com> wrote:
I have Polycoms working with DNS SRV without NAPTR records It was a matter of polycom provisioning files. I attached the 2 important files and that last important file named polycom_0004f21a0e87.cfg looks like this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <phone1> <reg reg.1.displayName="Test UA" reg.1.address="1001" reg.1.label="Test UA" reg.1.type="private" reg.1.auth.userId="1001" reg.1.auth.password="PASSWORD" reg.1.server.1.address="mypbx.mydomain.com" /> </phone1>
On Tue, Nov 1, 2011 at 10:13 AM, Lloyd Aloysius <lloyd.aloysius@sunteltech.ca> wrote:
Thank you for the reply . I miss the NAPTR records. Let me setup the NAPTR records and test again. Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 9:27 AM, Brian West <brian@freeswitch.org> wrote:
Ok you missed the part about the NAPTR records didn't you? Make sure
you
setup your NAPTR records correctly. I really don't get how people think they are optional. I know this says optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_.... but they aren't. /b On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote:
But this fails to register.
Thanks Lloyd
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Lloyd, as I said, I have Polycom's working with DNS SRV without NAPTR records (our DNS server, Windows Server 2003, does not have NAPTR capabilities.) We are running Polycom firmware 3.2.2 I struggled for a while getting it to work, but with the correct provisioning files, I got it to work. Please follow my configs strictly as any difference can cause it to not work. On Wed, Nov 2, 2011 at 7:22 PM, Lloyd Aloysius <lloyd.aloysius@gmail.com> wrote:
DynDns not supporting NAPTR. I received reply from them "We do not support NAPTR records."I am currently using DynDns for my DNS needs. Any other recommendation to make Polycom phone work with DNS SRV records without NAPTR records.
Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 4:57 PM, Lloyd Aloysius <lloyd.aloysius@gmail.com> wrote:
Vik, I have the same setting in my configuration files. But the phone never register. I will follow the Brian instructions [create NAPTR Records] shortly.
Thanks Lloyd
On Tue, Nov 1, 2011 at 10:46 AM, Vik Killa <vipkilla@gmail.com> wrote:
I have Polycoms working with DNS SRV without NAPTR records It was a matter of polycom provisioning files. I attached the 2 important files and that last important file named polycom_0004f21a0e87.cfg looks like this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <phone1> <reg reg.1.displayName="Test UA" reg.1.address="1001" reg.1.label="Test UA" reg.1.type="private" reg.1.auth.userId="1001" reg.1.auth.password="PASSWORD" reg.1.server.1.address="mypbx.mydomain.com" /> </phone1>
On Tue, Nov 1, 2011 at 10:13 AM, Lloyd Aloysius <lloyd.aloysius@sunteltech.ca> wrote:
Thank you for the reply . I miss the NAPTR records. Let me setup the NAPTR records and test again. Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 9:27 AM, Brian West <brian@freeswitch.org> wrote:
Ok you missed the part about the NAPTR records didn't you? Make sure you setup your NAPTR records correctly. I really don't get how people think they are optional. I know this says
optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_.... but they aren't. /b On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote:
But this fails to register.
Thanks Lloyd
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Vik, The configuration files are correct. 1. Ploycom Phones never send a registration to *pbx.mydomain.com* 2. IF I create *A* record [*pbx.mydomain.com *] , then it send the Registration request and Success. I think polycom need DNS SRV and NATPR records. May be you have A record for *pbx.mydomain.com *that is the reason it is working. ===== <?xml version="1.0" encoding="utf-8" standalone="yes"?> <!-- Per-phone configuration file --> <phone1> <reg reg.1.displayName="Ext 204" reg.1.address="204" reg.1.label="204" reg.1.type="private" reg.1.thirdPartyName="" reg.1.auth.userId="204" reg.1.auth.password="************" reg.1.server.1.address="" reg.1.server.1.port="" reg.1.server.1.transport="" reg.1.server.1.expires="" reg.1.server.1.register="" reg.1.server.1.retryTimeout="" reg.1.server.1.expires.lineSeize="" reg.1.acd-login-logout="0" reg.1.acd-agent-available="0" reg.1.ringType="2" reg.1.lineKeys="2" reg.1.callsPerLineKey="1" reg.2.displayName="" reg.2.address="" reg.2.label="" reg.2.type="" reg.2.thirdPartyName="" reg.2.auth.userId="" reg.2.auth.password="" reg.2.server.1.address="" reg.2.server.1.port="" reg.2.server.1.transport="" reg.2.server.1.expires="" reg.2.server.1.register="" reg.2.server.1.retryTimeout="" reg.2.server.1.expires.lineSeize="" reg.2.acd-login-logout="" reg.2.acd-agent-available="" reg.2.ringType="" reg.2.lineKeys="" reg.2.callsPerLineKey="" /> </phone1> === ======== sip.cfg ==== <?xml version="1.0" encoding="utf-8" standalone="yes"?> <!-- Generated sip-basic.cfg Configuration File --> <polycomConfig xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="polycomConfig.xsd"> <msg> <msg.mwi msg.mwi.1.callBackMode="registration" msg.mwi.2.callBackMode="registration"></msg.mwi> </msg> <voIpProt> <voIpProt.SIP voIpProt.SIP.enable="1"> <voIpProt.SIP.outboundProxy voIpProt.SIP.outboundProxy.address=""></voIpProt.SIP.outboundProxy> </voIpProt.SIP> <voIpProt.server voIpProt.server.1.address="pbx.mydomain.com" voIpProt.server.1.port="5060" voIpProt.server.1.transport="DNSnaptr" voIpProt.server.1.expires="60" voIpProt.server.1.register="1" voIpProt.server.1.retryTimeout="0" voIpProt.server.1.expires.lineSeize="30" voIpProt.server.2.address="" voIpProt.server.2.port="0"></voIpProt.server> </voIpProt> <SNTP tcpIpApp.sntp.daylightSavings.enable="1" tcpIpApp.sntp.address=" pool.ntp.org" tcpIpApp.sntp.gmtOffset="-18000" /> </polycomConfig> ======== Thanks and regards, Lloyd * * * <http://www.sunteltech.ca/blog/>* On Thu, Nov 3, 2011 at 8:12 AM, Vik Killa <vipkilla@gmail.com> wrote:
Lloyd, as I said, I have Polycom's working with DNS SRV without NAPTR records (our DNS server, Windows Server 2003, does not have NAPTR capabilities.) We are running Polycom firmware 3.2.2 I struggled for a while getting it to work, but with the correct provisioning files, I got it to work. Please follow my configs strictly as any difference can cause it to not work.
On Wed, Nov 2, 2011 at 7:22 PM, Lloyd Aloysius <lloyd.aloysius@gmail.com> wrote:
DynDns not supporting NAPTR. I received reply from them "We do not support NAPTR records."I am currently using DynDns for my DNS needs. Any other recommendation to make Polycom phone work with DNS SRV records without NAPTR records.
Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 4:57 PM, Lloyd Aloysius <lloyd.aloysius@gmail.com
wrote:
Vik, I have the same setting in my configuration files. But the phone never register. I will follow the Brian instructions [create NAPTR Records] shortly.
Thanks Lloyd
On Tue, Nov 1, 2011 at 10:46 AM, Vik Killa <vipkilla@gmail.com> wrote:
I have Polycoms working with DNS SRV without NAPTR records It was a matter of polycom provisioning files. I attached the 2 important files and that last important file named polycom_0004f21a0e87.cfg looks like this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <phone1> <reg reg.1.displayName="Test UA" reg.1.address="1001" reg.1.label="Test UA" reg.1.type="private" reg.1.auth.userId="1001" reg.1.auth.password="PASSWORD" reg.1.server.1.address="mypbx.mydomain.com" /> </phone1>
On Tue, Nov 1, 2011 at 10:13 AM, Lloyd Aloysius <lloyd.aloysius@sunteltech.ca> wrote:
Thank you for the reply . I miss the NAPTR records. Let me setup the NAPTR records and test again. Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 9:27 AM, Brian West <brian@freeswitch.org> wrote:
Ok you missed the part about the NAPTR records didn't you? Make
sure
you setup your NAPTR records correctly. I really don't get how people think they are optional. I know this says
optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_.... but they aren't. /b On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote:
But this fails to register.
Thanks Lloyd
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I definitely do NOT have NATPR records and the A record for pbx.mydomain.com does NOT point to my FS server. Trust me, I created the DNS records. I know I have DNS SRV running WITHOUT NATPR because I have 2 FS servers receiving calls/registrations from these Polycoms. Your polycom configs are NOT the same as mine. I'm TELLING you, you need the exact SAME polycom configs as me. I spent hours trying to get it to work and I succeeded, so either take my advice and use same configs or get NATPR records. On Thu, Nov 3, 2011 at 10:53 AM, Lloyd Aloysius <lloyd.aloysius@sunteltech.ca> wrote:
Vik, The configuration files are correct. 1. Ploycom Phones never send a registration to pbx.mydomain.com 2. IF I create A record [pbx.mydomain.com ] , then it send the Registration request and Success. I think polycom need DNS SRV and NATPR records. May be you have A record for pbx.mydomain.com that is the reason it is working. ===== <?xml version="1.0" encoding="utf-8" standalone="yes"?> <!-- Per-phone configuration file --> <phone1> <reg reg.1.displayName="Ext 204" reg.1.address="204" reg.1.label="204" reg.1.type="private" reg.1.thirdPartyName="" reg.1.auth.userId="204" reg.1.auth.password="************" reg.1.server.1.address="" reg.1.server.1.port="" reg.1.server.1.transport="" reg.1.server.1.expires="" reg.1.server.1.register="" reg.1.server.1.retryTimeout="" reg.1.server.1.expires.lineSeize="" reg.1.acd-login-logout="0" reg.1.acd-agent-available="0" reg.1.ringType="2" reg.1.lineKeys="2" reg.1.callsPerLineKey="1" reg.2.displayName="" reg.2.address="" reg.2.label="" reg.2.type="" reg.2.thirdPartyName="" reg.2.auth.userId="" reg.2.auth.password="" reg.2.server.1.address="" reg.2.server.1.port="" reg.2.server.1.transport="" reg.2.server.1.expires="" reg.2.server.1.register="" reg.2.server.1.retryTimeout="" reg.2.server.1.expires.lineSeize="" reg.2.acd-login-logout="" reg.2.acd-agent-available="" reg.2.ringType="" reg.2.lineKeys="" reg.2.callsPerLineKey="" /> </phone1> === ======== sip.cfg ==== <?xml version="1.0" encoding="utf-8" standalone="yes"?> <!-- Generated sip-basic.cfg Configuration File --> <polycomConfig xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="polycomConfig.xsd"> <msg> <msg.mwi msg.mwi.1.callBackMode="registration" msg.mwi.2.callBackMode="registration"></msg.mwi> </msg> <voIpProt> <voIpProt.SIP voIpProt.SIP.enable="1"> <voIpProt.SIP.outboundProxy voIpProt.SIP.outboundProxy.address=""></voIpProt.SIP.outboundProxy> </voIpProt.SIP> <voIpProt.server voIpProt.server.1.address="pbx.mydomain.com" voIpProt.server.1.port="5060" voIpProt.server.1.transport="DNSnaptr" voIpProt.server.1.expires="60" voIpProt.server.1.register="1" voIpProt.server.1.retryTimeout="0" voIpProt.server.1.expires.lineSeize="30" voIpProt.server.2.address="" voIpProt.server.2.port="0"></voIpProt.server> </voIpProt> <SNTP tcpIpApp.sntp.daylightSavings.enable="1" tcpIpApp.sntp.address="pool.ntp.org" tcpIpApp.sntp.gmtOffset="-18000" /> </polycomConfig> ======== Thanks and regards,
Lloyd
On Thu, Nov 3, 2011 at 8:12 AM, Vik Killa <vipkilla@gmail.com> wrote:
Lloyd, as I said, I have Polycom's working with DNS SRV without NAPTR records (our DNS server, Windows Server 2003, does not have NAPTR capabilities.) We are running Polycom firmware 3.2.2 I struggled for a while getting it to work, but with the correct provisioning files, I got it to work. Please follow my configs strictly as any difference can cause it to not work.
On Wed, Nov 2, 2011 at 7:22 PM, Lloyd Aloysius <lloyd.aloysius@gmail.com> wrote:
DynDns not supporting NAPTR. I received reply from them "We do not support NAPTR records."I am currently using DynDns for my DNS needs. Any other recommendation to make Polycom phone work with DNS SRV records without NAPTR records.
Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 4:57 PM, Lloyd Aloysius <lloyd.aloysius@gmail.com> wrote:
Vik, I have the same setting in my configuration files. But the phone never register. I will follow the Brian instructions [create NAPTR Records] shortly.
Thanks Lloyd
On Tue, Nov 1, 2011 at 10:46 AM, Vik Killa <vipkilla@gmail.com> wrote:
I have Polycoms working with DNS SRV without NAPTR records It was a matter of polycom provisioning files. I attached the 2 important files and that last important file named polycom_0004f21a0e87.cfg looks like this: <?xml version="1.0" encoding="UTF-8" standalone="yes"?> <phone1> <reg reg.1.displayName="Test UA" reg.1.address="1001" reg.1.label="Test UA" reg.1.type="private" reg.1.auth.userId="1001" reg.1.auth.password="PASSWORD" reg.1.server.1.address="mypbx.mydomain.com" /> </phone1>
On Tue, Nov 1, 2011 at 10:13 AM, Lloyd Aloysius <lloyd.aloysius@sunteltech.ca> wrote:
Thank you for the reply . I miss the NAPTR records. Let me setup the NAPTR records and test again. Thanks and regards,
Lloyd
On Tue, Nov 1, 2011 at 9:27 AM, Brian West <brian@freeswitch.org> wrote: > > Ok you missed the part about the NAPTR records didn't you? Make > sure > you > setup your NAPTR records correctly. I really don't get how people > think > they are optional. > I know this says > > > optional http://wiki.freeswitch.org/wiki/SIP_TLS#Step_5_-_DNS_NAPTR_.26_SRV_Records_.... > but they aren't. > /b > On Nov 1, 2011, at 8:22 AM, Lloyd Aloysius wrote: > > But this fails to register. > > Thanks > Lloyd > > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It will not look up the NAPTR or SRV records at all since you have specified port 5060. Don't specify the port number and it should work. We run a large number of polycom phones without NAPTR records here. However we don't use the outboundProxy attributes at all. We use voIpProt.server.x.address or the phone's reg.x.server.x.address to tell the phones where to register. You shouldn't need to specify outboundProxy unless you need your signaling packets to go to a different server than the registration. -Evan From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Lloyd Aloysius Sent: Tuesday, November 01, 2011 6:23 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] FreeSWITCH - Polycom and DNS SRV Brian, Thank you for the reply. I set the voIpProt.SIP.transport="DNSnaptr" <SIP voIpProt.SIP.sdpNewType="0" voIpProt.SIP.tcpEnabled="0"> <outboundProxy voIpProt.SIP.outboundProxy.address="sip.mydomain.com<http://sip.mydomain.com>" voIpProt.SIP.transport="DNSnaptr" voIpProt.SIP.outboundProxy.port="5060 /> </SIP> But this fails to register. Thanks Lloyd On Tue, Nov 1, 2011 at 9:11 AM, Brian West <brian@freeswitch.org<mailto:brian@freeswitch.org>> wrote: I'm going to guess you have not set voIpProt.server.x.transport="DNSnaptr" and you're missing NAPTR records too. /b On Nov 1, 2011, at 7:48 AM, Lloyd Aloysius wrote: Hi , I am testing the Polycom Phones [IP335,IP450 and IP6000] and DNS SRV records. All my DNS SRV records and other phone models [Cisico , Asstra, Yealink] working without any issue. But for Polycom Phones .. I need to specify the "Outbound Proxy" as IP address otherwise phone never register. * voIpProt.SIP.outboundProxy.address="IP ADDRESS"* I could not find why we need to specify "Outbound Proxy? How to avoid using IP address? Does Polycom phones fully support DNS SRV records? Any help is appreciated. Thanks and regards, Lloyd FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Evan ... Thank you very much. Yes remove the port number solve my registration. Even polycom tech support could not help to solve the problem last two days. -- Vik , I trust your statement. Thank you for the help. I did not think port number is making this much of problem. Yes .. your configuration do not have port number and it is correct. Thanks again. Thanks and regards, Lloyd On Wed, Nov 2, 2011 at 8:11 PM, Evan P. Hall <evan@corpwest.com> wrote:
It will not look up the NAPTR or SRV records at all since you have specified port 5060. Don’t specify the port number and it should work. * ***
** **
We run a large number of polycom phones without NAPTR records here. However we don’t use the outboundProxy attributes at all. We use voIpProt.server.x.address or the phone’s reg.x.server.x.address to tell the phones where to register. You shouldn’t need to specify outboundProxy unless you need your signaling packets to go to a different server than the registration.****
** **
-Evan****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Lloyd Aloysius *Sent:* Tuesday, November 01, 2011 6:23 AM *To:* FreeSWITCH Users Help
*Subject:* Re: [Freeswitch-users] FreeSWITCH - Polycom and DNS SRV****
** **
Brian,****
** **
Thank you for the reply. I set the voIpProt.SIP.transport="DNSnaptr"****
** **
** **
<SIP voIpProt.SIP.sdpNewType="0" voIpProt.SIP.tcpEnabled="0">****
<outboundProxy****
voIpProt.SIP.outboundProxy.address="sip.mydomain.com"****
voIpProt.SIP.transport="DNSnaptr"****
voIpProt.SIP.outboundProxy.port="5060 />****
</SIP>****
** **
But this fails to register.****
Thanks****
Lloyd****
** **
On Tue, Nov 1, 2011 at 9:11 AM, Brian West <brian@freeswitch.org> wrote:** **
I'm going to guess you have not set voIpProt.server.x.transport="DNSnaptr" and you're missing NAPTR records too.****
** **
/b****
** **
On Nov 1, 2011, at 7:48 AM, Lloyd Aloysius wrote:****
** **
Hi ,
I am testing the Polycom Phones [IP335,IP450 and IP6000] and DNS SRV records. All my DNS SRV records and other phone models [Cisico , Asstra, Yealink] working without any issue.
But for Polycom Phones .. I need to specify the "Outbound Proxy" as IP address otherwise phone never register.****
* voIpProt.SIP.outboundProxy.address="IP ADDRESS"*****
I could not find why we need to specify "Outbound Proxy? How to avoid using IP address?
Does Polycom phones fully support DNS SRV records?
Any help is appreciated.
Thanks and regards,
Lloyd****
** **
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****
** **
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
Brian West
-
Evan P. Hall
-
Lloyd Aloysius
-
Lloyd Aloysius
-
Vik Killa