- Freeswitch-biz - FreeSWITCH Mailing Lists

FUSF Advisor?
by Avi Marcus 01 Jan '20

01 Jan '20

Hi folks. I run a small calling card, based financially in the USA and with most of my carriers operating legally out of the USA. I do not have a FUSF filing ID, and therefore many (but not all??) of my carriers pass through the FUSF fees. (One of which is a whopping 33.3% extra: FUSF 25% + State 8.3% = 33.3% Total Combo of state, local, and federal taxes.) As a "small" carrier, I see that de-minimis companies don't pay part of the fees. So perhaps I don't have to pay as much as I'm being made to pay? I don't quite grok most of the terminology on the instructions <https://docs.fcc.gov/public/attachments/DA-18-1298A3.pdf>for the 499-A. Any recommendations for someone who can help me figure out if I should file myself to lower my fees? Thanks, -Avi Marcus

1 0

ICTFax version 4.0 , Open source Fax over Ip software
by Tahir Almas 09 Feb '19

09 Feb '19

We are pleased to announce that ICTFax 4.0 has been released developed over freeswitch , ictcore and angular framework. New features include ATA / Extension support and REST API http://ictfax.org/ictfax-4.0-released-with-ata-api-support Regards *Tahir Almas* Managing Partner ICT Innovations http://www.ictinnovations.com Leveraging open source in ICT

1 0

ICTBroadcast Enterprise Edition free licenses available
by Tahir Almas 13 Dec '18

13 Dec '18

On completion of 10 years of ICTBroadcast , the unified telemarketing software, We are happy to offer free licenses of ICTBroadcast Enterprise Edition 2 channels , 5 channels , 10 channels and 50 channels licenses. Limited licenses Register now https://service.ictinnovations.com/cart.php?gid=1 http://www.ictbroadcast.com Regards *Tahir Almas* Managing Partner ICT Innovations http://www.ictinnovations.com Leveraging open source in ICT

1 0

ICTDialer , A freeswitch based unified autodialer software featuring sms, fax and voice broadcasting
by Tahir Almas 01 Mar '18

01 Mar '18

We are pleased to annouse release of ICTDialer Version 3.0 based on open source communication development framework ICTCore http://www.ictcore.org and freeswitch communication engine http://www.freeswitch.org regards *Tahir Almas* Managing Partner ICT Innovations http://www.ictinnovations.com Leveraging open source in ICT

1 1

SMS800 MGI
by Vance Gorke 19 Sep '17

19 Sep '17

I would like to connect with anyone with experience building the MGI used for SMS800 -- Vance Gorke Great Oak Media Phone 84-GREATOAK (844-732-8625) Email vance(a)greatoakmedia.com

1 0

[CALLYNX] DID and Quality CLI termination provider
by [CALLYNX] Info 04 Mar '16

04 Mar '16

CALLYNX is a re branded telecom company which is business since 2002. We are happy to announce the launch of the new website. www.Callynx.com With more than 7000 ratecenters in US alone, we strive to bring the quality telecommunication to your commercial or opensource switches. Take a look and sign up at www.callynx.com and you also receive a FREE credit to test our services. Callynx Team WWW.CALLYNX.COM 180 Promenade Circle #300 Sacramento, CA 95834

1 0

Need help configuring CGRates with FreeSWITCH
by Victor Chukalovskiy 19 Oct '15

19 Oct '15

Good day, I'm looking for someone to assist configuring CGRates + FreeSWITCH combo. A good handle on different ways to run CGRates is essential: default scenario where CGRates controls call setup in real-time, as well as non-default where CGRates processes offline .csv CDRs. The deal would involve 1-3 days of consulting time, at a rate of 50-80 $USD/Hr. The consultant will work together with me during office hours (9 - 5 EST) via desktop sharing app and phone / skype. The primary goal would be to configure .csv cdr upload from multiple FS instances, load and apply several rate-sheets, configure monthly and daily reporting, as well as some alarms / thresholds. Please respond off-list if you are interested or if you know someone who might be. Thank you, -Victor

3 4

REQUEST FOR QUOTATION
by Nik San 18 Aug '15

18 Aug '15

Hello, I need someone to build me a system in order to sell VoIP, including FAX and SMS all in one, and of course the web interfaces for the admin and the users. Whoever is interested please send me over your contact details and also any information you have related to previous similar work you have done. I will get back to you with more details. Although much discussion needs to be done in order to decide on the final cost, I need you to inform me of your lowest amount you require for such a project. At least I will have an idea of your level of quotation and we will not waste each other's time. Don't forget to mention your preferred currency. Thank you, Nik

2 1

freeswitch benchmark
by Jeevan Dhami 07 Aug '15

07 Aug '15

Hi I am tring to benchmark freeswitch call capacity. But After 700 concurrent call load i am getting some distortion and other problems (Mentioned below). I need your help to tune my freeswitch server or freeswitch with which i can reach at higher concurrent calls. My Setup: I have 2 servers. *Sipp Server:* OS : Centos 6.2 64 bit. RAM . 2 GB *FreeSwitch Server:* OS : RHEL 6.2 64 bit. RAM . 4 GB freeswitch Version 1.5.15b *a-* when i was trying for 500 concurrent call to freeswitch using following command ./sipp -i 10.168.1.10 -sf data/uac_raj.xml 10.168.1.25:6060 -s 12345 -r 50 -l 500 -m 3000 -t u1 -inf data/number3.lst -trace_err -max_socket 503 its was working fine in following terms 1-After 500 concurrent calls load i make a call from softphone. Voice quality was good. 2- quick response from freeswitch 3-call duration was fixed for each call. (In CDR i found call duration 24 for all calls) 4-all 3000 call are successfully completed *b-* when i was trying for 700 to 1200 concurrent call to freeswitch using following command *For 700 calls* ./sipp -i 10.168.1.10 -sf data/uac_raj.xml 10.168.1.25:6060 -s 12345 -r 70 -l 700 -m 3000 -t u1 -inf data/number3.lst -trace_err -max_socket 703 *For 1200 calls* ./sipp -i 10.168.1.10 -sf data/uac_raj.xml 10.168.1.25:6060 -s 12345 -r 120 -l 1200 -m 3000 -t u1 -inf data/number3.lst -trace_err -max_socket 1203 *its was working fine in following terms* 1-quick response from freeswitch 2-all 3000 call are successfully completed *its was not working fine in following terms* 1- I was getting some distortion in voice , in my test call from soft phone 2- In CDR file , call duration for all calls was varying. *c-* when i was trying for more than 1200 concurrent call to freeswitch using following command ./sipp -i 10.168.1.10 -sf data/uac_raj.xml 10.168.1.25:6060 -s 12345 -r 130 -l 1300 -m 3000 -t u1 -inf data/number3.lst -trace_err -max_socket 1303 *its was not working fine in following terms* 1- I was getting some distortion in voice , in my test call from soft phone 2- In CDR file , call duration for all calls was varying. 3- At softphone call i was getting ANSWER response very late. -- *Jeevan Singh Dhami* *(9650541245)*

4 3

Digium setup help
by Royce Mitchell III 23 Jun '15

23 Jun '15

The free switch consultants aren't available until after ClueCon and my client is unfortunately impatient. Is anybody available to help configure freeswitch for a couple digium cards on centos6 ? -- Royce Mitchell, IT Consultant ITAS Solutions royce3(a)itas-solutions.com

1 0