May 2012 - freeswitch-biz@lists.freeswitch.org

Re: [Freeswitch-biz] Consultant Needed
by Max Clark 30 May '12

30 May '12

I'm aware of consulting(a)freeswitch.org. I'm posting here to find an alternate option. -Max On Wed, May 30, 2012 at 11:02 AM, Meftah Tayeb <tayeb.meftah(a)gmail.com>wrote: > Max; > please email consulting(a)freeswitch.org > thank you > ----- Original Message ----- From: "Max Clark" <max.clark(a)gmail.com> > To: <freeswitch-biz(a)lists.**freeswitch.org<freeswitch-biz(a)lists.freeswitch.org> > > > Sent: Wednesday, May 30, 2012 10:23 PM > Subject: [Freeswitch-biz] Consultant Needed > > > I am looking for a seasoned, experianced consultant to help with our >> growing voice platform. You will be taking care of things we: a) can not >> figure out ourselves, b) need guidance on best practices, or c) don't have >> the time to handle. As a result this is not a junior/mid level >> requirement. >> If you're just starting out this isn't a good match. >> >> Examples include: >> >> - Validate existing configuration / provide recommendations and >> suggestions for improvements >> - Serve as a sounding board / escalation for internal engineering >> - Troubleshoot the ocasional DTMF issue with new SIP endpoints >> - Integrate transcoding offloading >> - Package custom RPMs for deployment to our production servers >> - Custom module development >> - Integrate SER/SIPs/Kamillo for load balancing/nat traversal >> >> >> Obviously you must be extremely proficient with: >> >> - SIP >> - FreeSWITCH (Asterisk a plus) >> - Linux (FreeBSD a plus) >> - Sip Routers >> >> >> I'm open to either individual consultants or a small firm. As we get to >> know each other this will be a T&M/Project Scope structure which will >> evolve into a monthly retainer. >> >> Please send me a note offlist with your experiance and we'll setup a time >> to talk via PSTN/Skype. >> >> Max >> >> >> >> __________ Information from ESET NOD32 Antivirus, version of virus >> signature database 6830 (20120126) __________ >> >> The message was checked by ESET NOD32 Antivirus. >> >> http://www.eset.com >> >> >> > > ------------------------------**------------------------------** > -------------------- > > > ______________________________**_________________ >> Freeswitch-biz mailing list >> Freeswitch-biz(a)lists.**freeswitch.org<Freeswitch-biz(a)lists.freeswitch.org> >> http://lists.freeswitch.org/**mailman/listinfo/freeswitch-**biz<http://lists.freeswitch.org/mailman/listinfo/freeswitch-biz> >> >> >> >> __________ Information from ESET NOD32 Antivirus, version of virus >> signature database 6830 (20120126) __________ >> >> The message was checked by ESET NOD32 Antivirus. >> >> http://www.eset.com >> >> >> > > __________ Information from ESET NOD32 Antivirus, version of virus > signature database 6830 (20120126) __________ > > The message was checked by ESET NOD32 Antivirus. > > http://www.eset.com > > > >

1 0

[Freeswitch-biz] Consultant Needed
by Max Clark 30 May '12

30 May '12

I am looking for a seasoned, experianced consultant to help with our growing voice platform. You will be taking care of things we: a) can not figure out ourselves, b) need guidance on best practices, or c) don't have the time to handle. As a result this is not a junior/mid level requirement. If you're just starting out this isn't a good match. Examples include: - Validate existing configuration / provide recommendations and suggestions for improvements - Serve as a sounding board / escalation for internal engineering - Troubleshoot the ocasional DTMF issue with new SIP endpoints - Integrate transcoding offloading - Package custom RPMs for deployment to our production servers - Custom module development - Integrate SER/SIPs/Kamillo for load balancing/nat traversal Obviously you must be extremely proficient with: - SIP - FreeSWITCH (Asterisk a plus) - Linux (FreeBSD a plus) - Sip Routers I'm open to either individual consultants or a small firm. As we get to know each other this will be a T&M/Project Scope structure which will evolve into a monthly retainer. Please send me a note offlist with your experiance and we'll setup a time to talk via PSTN/Skype. Max

2 1

[Freeswitch-biz] FreeSWITCH / TAPI driver (using ESL)
by François Delawarde 23 May '12

23 May '12

Hello, Anyone knows of an open-source or commercial multi-line TAPI driver that can connect FreeSWITCH? SIP TAPI is an option, but doesn't provide full control over lines (for example it cannot be used to hangup an existing call). So I'm looking for something that uses ESL and can translate Events and send origination commands to FS. I have a tiny budget (a few hundreds of euros) to pay for licenses / dev work. Thanks, François.

1 0

[Freeswitch-biz] VoipDrupal
by Luis Guaman 08 May '12

08 May '12

Hello All We are ready to offer our services to deploy Freeswitch / Plivo / VoipDrupal solutions. Please contact us if you need some assistance ___________________________ Info(a)interlancompu.com Interlancompu.com @interlancompu +593(2)2526585 +593(9)4264354 República 396 y Almagro Quito - Ecuador ___________________________

1 0

[Freeswitch-biz] voice bulletin board requirement
by Rodney 07 May '12

07 May '12

we are looking for a talented FS developer that can create a "voice bulletin board application" that will be accessible from our IVR system. This will need to have basic recording functionality and playback in a LIFO method. scenario. user selects voice bbs option from ivr and gets transferred to your module programmed in lua or other compatible language with our windows server 2008 implementation of FS. the caller is provided an option to play or listen to other callers public messages, or record one of their own. module must have ability to set message length and be able to be duplicated to have multiple voice bbs's on same ivr system. ivr owner must be able to set max messages held. ie. 30 or so. additional options wanted but not necessary with initial development if costs run to high. 1. ability to limit the amount of messages per call 2. spam reporting which if more than one <-- (editable) user based on cid/animarks as spam then message gets auto deleted 3. admin functionality so ivr owner can delete messages deemed not acceptable. 3. possible moderated voice bbs function if ivr owner would like to have a "moderated vbbs" to listen to how a similar system works. please call our competitors public chatline 2 1 8-8 9 5-2 0 8 0 and choose option #2 from the main menu. If you are interested in this gig then please contact me with your expected turn around time, estimate on costs and experience. email >> voiceserver03 @ gmail

1 0

[Freeswitch-biz] Looking for a Web Developer w/ FreeSWITCH experience
by Brian Foster 07 May '12

07 May '12

*Position Title: *Web Development Specialist (Contracted) * * *Job Purpose: *A Web Development Specialist will be responsible for creating and maintaining websites for the purposes of customer support, account management, and internal billing for Endigo Computer's telecommunications companies. *Job Duties: * * * - Work closely with the development team to develop detailed specifications with clear timelines and deliverables (proposal/scope of work) - Attend company meetings during the development process - Work with development team to refine business processes, graphics, and code - Convert raw images into a CSS or equivalent theme - Communicate with development team to adjust timelines and deliverables - Engage in outside-of-the-box thinking to improve customer service, costs involved, security, and decrease maintenance time/costs - Alert development team to the emerging technologies related to the project(s) *Requirements:* * * - BS in a Computer-related field - 3 years minimum experience with HTML/PHP/Java/CSS - 2 years minimum experience with relational database systems such as MySQL and Postgres with a strong understanding of SQL - 2 years minimum experience with FreeSWITCH - Experience with web development tools - Self starter w/ self-management skills - Ability to stay organized and keep multiple priorities in check Web Development Specialists are contracted on an hourly basis, with a possibility of moving to a full-time salaried position within the company or a subsidiary. If you are interested, please send an email to jobs (at) endigotech (dot) com with your resume and references attached. -- Brian D. Foster Endigo Computer LLC Email: bdfoster(a)endigotech.com Phone: 317-800-7876 Indianapolis, Indiana, USA This message contains confidential information and is intended for those listed in the "To:", "CC:", and/or "BCC:" fields of the message header. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.

1 0

[Freeswitch-biz] NT mode is not working with Freeswitch using FreeTDM
by Jayaprakash 07 May '12

07 May '12

Hi all, I am using Openvox BRI card with Freeswitch using FreeTDM. In NT mode I couldn't get dialtone. I got the error like " Unable to get channel 1: -1". Please help me to solve this issue. I have attached my configuration details. -- Thanks and Regards R.Jayaprakash VoIP Support Engineer Cem Solutions Bangalore-66 Email-id: jayaprakash(a)cem-solutions.net freeswitch(a)localhost.localdomain> ftdm list +OK span: 1 (BRI_1) type: isdn physical_status: ok signaling_status: UP chan_count: 3 dialplan: asterisk context: from-intern dial_regex: fail_dial_regex: hold_music: analog_options: none +OK span: 2 (BRI_2) type: isdn physical_status: ok signaling_status: DOWN chan_count: 3 dialplan: XML context: from-bri dial_regex: fail_dial_regex: hold_music: analog_options: none freeswitch(a)localhost.localdomain> ftdm dump 1 1 span_id: 1 chan_id: 1 physical_span_id: 1 physical_chan_id: 1 physical_status: ok physical_status_red: 0 physical_status_yellow: 0 physical_status_rai: 0 physical_status_blue: 0 physical_status_ais: 0 physical_status_general: 0 signaling_status: UP type: B state: DOWN last_state: RESTART txgain: 0.00 rxgain: 0.00 cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE session: (none) -- States -- -- Function -- -- Location -- -- Time Offset -- DOWN => RESTART [on_dchan_up] [ftmod_libpri.c:1520] 0ms RESTART => DOWN [state_advance] [ftmod_libpri.c:685] 1ms Time since last state change: 4138429ms [root@localhost bin]# cat ../conf/freetdm.conf [span zt BRI_1] trunk_type => bri_ptmp b-channel => 1-2 d-channel => 3 [span zt BRI_2] trunk_type => bri_ptmp b-channel => 1-2 d-channel => 3 [root@localhost bin]# cat ../conf/autoload_configs/freetdm.conf.xml <configuration name="freetdm.conf" description="FreeTDM Configuration"> <settings> <param name="debug" value="0"/> <param name="dtmfdebug" value="1"/> <param name="crash-on-assert" value="no"/> <param name="overlap" value="yes"/> </settings> <libpri_spans> <span name="BRI_1"> <param name="node" value="net"/> <param name="switch" value="euroisdn"/> <param name="dialplan" value="asterisk"/> <param name="context" value="from-intern"/> <param name="debug" value="q931_all"/> </span> <span name="BRI_2"> <param name="node" value="cpe"/> <param name="switch" value="euroisdn"/> <param name="dialplan" value="XML"/> <param name="context" value="from-bri"/> <param name="debug" value="q931_all"/> </span> </libpri_spans> </configuration> WHILE OFFHOOK THE NT PHONE freeswitch@internal> 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 < Protocol Discriminator: Q.931 (8) len=8 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 < TEI=65 Call Ref: len= 1 (reference 1/0x1) (Sent from originator) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 < Message Type: DISCONNECT (69) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 < [08 02 80 90] 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 < Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: User (0) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 < Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 Received message for call 0xb77119a0 on link 0x87cbb08 TEI/SAPI 65/0 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 -- Processing IE 8 (cs0, Cause) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 q931.c:8707 post_handle_q931_message: Call 1 enters state 12 (Disconnect Indication). Hold state: Idle 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 q931.c:6837 q931_hangup: Hangup other cref:1 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 q931.c:6594 __q931_hangup: ourstate Disconnect Indication, peerstate Disconnect Request, hold-state Idle 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 q931.c:5703 q931_release: Call 1 enters state 19 (Release Request). Hold state: Idle 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 Sending message for call 0xb77119a0 on call->link: 0x87cbb08 with TEI/SAPI 65/0 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > DL-DATA request 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > Protocol Discriminator: Q.931 (8) len=8 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > TEI=65 Call Ref: len= 1 (reference 1/0x1) (Sent to originator) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > Message Type: RELEASE COMPLETE (90) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > Protocol Discriminator: Q.931 (8) len=8 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > TEI=65 Call Ref: len= 1 (reference 1/0x1) (Sent to originator) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > Message Type: RELEASE COMPLETE (90) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > [08 02 81 90] 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0 Location: Private network serving the local user (1) 2012-04-27 19:45:25.465395 [DEBUG] ftmod_libpri.c:146 > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ] 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < Protocol Discriminator: Q.931 (8) len=17 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < TEI=65 Call Ref: len= 1 (reference 1/0x1) (Sent from originator) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < Message Type: SETUP (5) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < [04 03 80 90 a3] 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < Bearer Capability (len= 5) [ Ext: 1 Coding-Std: 0 Info transfer capability: Speech (0) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < Ext: 1 Trans mode/rate: 64kbps, circuit-mode (16) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < User information layer 1: A-Law (35) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < [6c 02 01 80] 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < Calling Number (len= 4) [ Ext: 0 TON: Unknown Number Type (0) NPI: ISDN/Telephony Numbering Plan (E.164/E.163) (1) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < Presentation: Presentation permitted, user number not screened (0) '' ] 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < [7d 02 91 81] 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 < IE: High-layer Compatibility (len = 4) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 Received message for call 0xb77119a0 on link 0x87cbb08 TEI/SAPI 65/0 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 -- Processing Q.931 Call Setup 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 -- Processing IE 4 (cs0, Bearer Capability) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 -- Processing IE 108 (cs0, Calling Party Number) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 -- Processing IE 125 (cs0, High-layer Compatibility) 2012-04-27 19:45:30.005365 [DEBUG] ftmod_libpri.c:146 !! No handler for IE 125 (cs0, High-layer Compatibility)

1 0