On Mon, May 28, 2012 at 12:49 AM, copycall <dave@copycall.com> wrote:

curriegrad2004,

thanks for responding.

unfortunately, the sangoma tech support has not been as crack as usual.

i can go into the specifics, but it probably isn't necessary in a public forum. i'm not looking to piss anyone off.

if you have you actually configured a a101 sangoma card for a legacy CAS T1 card, i would greatly appreciate your assistance.

It's been a while since I configured for RBS, but I may be able to give you some pointers. Where are you at? did you have the drivers compiled? http://wiki.sangoma.com/wanpipe-freeswitch-ftdm As that web page states, RBS with FreeSWITCH is only supported using Wanpipe + DAHDI, not in native Wanpipe mode. http://wiki.sangoma.com/FreeSWITCH-Dahdi-Mode The module you want to use is ftmod_analog *Moises Silva **Manager, Software Engineering*** msilva@sangoma.com Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475 (N. America) t. +1 905 474 1990 x128 f. +1 905 474 9223 **<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products<http://sangoma.com/products?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Solutions<http://sangoma.com/solutions?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Events<http://sangoma.com/about_us/events?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Contact<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Wiki<http://wiki.sangoma.com/?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Facebook<http://www.facebook.com/pages/Sangoma-VoIP-Cards/43578453335?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures> | Twitter<http://www.twitter.com/sangoma?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>`| | YouTube<http://www.youtube.com/sangomatechnologies?utm_source=signature&utm_medium=email&utm_campaign=email%2Bsignatures>

Has this issue been resolved. I am also having problems getting Sangoma A101D working on FS using and RBS T-1. Getting one way audio, out but not in. Brian C. Edgar, Jr. Senior Systems Administrator Voice Systems Engineering Inc. Email: bedgar@vseinc.com<mailto:bedgar@vseinc.com> Phone: 215-953-8568 x278 From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of copycall Sent: Monday, May 28, 2012 5:53 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] freeswitch - sangoma CAS T1 - a101 configuration moises, thank you for your response. the T1 linecard at the end of this call is CAS T1, with B8ZS, and ESF, extended super frame, with E&M trunk signaling. as i understand it, this is not robbed bit signaling, but a later variation of it. i will paste the sangoma linecard config, below: ######################################################################## # Sangoma Wanpipe # # Dahdi/Zaptel/SMG/TDMAPI/BOOT Configuration Script # # v2.39 # # Sangoma Technologies Inc. # # Copyright(c) 2009. # ######################################################################## Would you like to change FreeSWITCH Configuration Directory? Default: /usr/local/freeswitch/conf 1. NO 2. YES [1-2, ENTER='NO']:NO Error: Invalid option, input an integer [1-2, ENTER='NO']:1 --------------------------------------------- Configuring T1/E1 cards [A101/A102/A104/A108] --------------------------------------------- A101 detected on slot:4 bus:3 ----------------------------------------------------------- Configuring port 1 on A101 slot:4 bus:3. ----------------------------------------------------------- Select media type for AFT-A101 on port 1 [slot:4 bus:3 span:1] 1. T1 2. E1 3. Unused 4. Exit [1-4]:1 Configuring port 1 on AFT-A101 as: T1, coding:B8ZS, framing:ESF. 1. YES - Keep these settings 2. NO - Configure line coding and framing [1-2, ENTER='YES']:YES Error: Invalid option, input an integer [1-2, ENTER='YES']:1 Select clock for AFT-A101 on port 1 [slot:4 bus:3 span:1] 1. NORMAL 2. MASTER [1-2]:1 Select Switchtype for AFT-A101 on port 1 [slot:4 bus:3 span:1] 1. National 2. Nortel DMS100 3. Lucent 5ESS 4. Lucent 4ESS [1-4]:1 Select signalling type for AFT-A101 on port 1 [slot:4 bus:3 span:1] 1. PRI CPE 2. PRI NET [1-2]:1 Select dialplan context for AFT-A101 on port 1 1. default 2. public 3. Custom [1-3]:1 Input the dialing group for this port : 1 Would you like to enable hardware DTMF detection? 1. YES 2. NO [1-2, ENTER='YES']:1 Would you like to enable hardware fax detection? 1. YES 2. NO [1-2, ENTER='NO']:1 Port 1 on AFT-A101 configuration complete... Press any key to continue: T1/E1 card configuration complete. Press any key to continue: ------------------------------------ Configuring ISDN BRI cards [A500/B700] ------------------------------------ No Sangoma ISDN BRI cards detected Press any key to continue: ------------------------------------ Configuring GSM cards [W400] ------------------------------------ No Sangoma GSM cards detected Press any key to continue: ------------------------------------ Configuring analog cards [A200/A400/B600/B610/B700/B800] ------------------------------------ ------------------------------------ Configuring USB devices [U100] ------------------------------------ ################################################################### # SUMMARY # ################################################################### 1 T1/E1 port(s) detected, 1 configured 0 ISDN BRI port(s) detected, 0 configured 0 analog card(s) detected, 0 configured 0 GSM card(s) detected, 0 configured 0 usb device(s) detected, 0 configured Configurator will create the following files: 1. Wanpipe config files in /etc/wanpipe 2. freetdm config file /usr/local/freeswitch/conf/freetdm.conf 3. freetdm_xml config file /usr/local/freeswitch/conf/freetdm.conf.xml Your configuration has been saved in /etc/wanpipe/debug-2012-05-18.tgz. When requesting support, email this file to techdesk@sangoma.com<mailto:techdesk@sangoma.com> ################################################################### Configuration Complete! Please select following: 1. YES - Continue 2. NO - Exit [1-2]:1 Wanpipe configuration complete: choose action 1. Save cfg: Stop Wanpipe now 2. Do not save cfg: Exit [1-2]:1 sh: asterisk: not found sh: asterisk: not found Stopping Wanpipe... Removing old configuration files... Copying new Wanpipe configuration files... Copying new freetdm configuration files (/usr/local/freeswitch/conf/freetdm.conf)... Copying new freetdm configuration files (/usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml)... Wanrouter start complete... Current boot level is 2 Wanrouter boot scripts configuration... Removing existing wanrouter boot scripts...OK Would you like wanrouter to start on system boot? 1. YES 2. NO [1-2]:1 Verifying Zaptel boot scripts... Enabling wanrouter init scripts ...(start:8, stop:91) Sangoma cards configuration complete, exiting... root@copycall:~# thanks, dave cook On Mon, May 28, 2012 at 12:24 PM, Moises Silva <moises.silva@gmail.com<mailto:moises.silva@gmail.com>> wrote: On Mon, May 28, 2012 at 12:49 AM, copycall <dave@copycall.com<mailto:dave@copycall.com>> wrote: curriegrad2004, thanks for responding. unfortunately, the sangoma tech support has not been as crack as usual. i can go into the specifics, but it probably isn't necessary in a public forum. i'm not looking to piss anyone off. if you have you actually configured a a101 sangoma card for a legacy CAS T1 card, i would greatly appreciate your assistance. It's been a while since I configured for RBS, but I may be able to give you some pointers. Where are you at? did you have the drivers compiled? http://wiki.sangoma.com/wanpipe-freeswitch-ftdm As that web page states, RBS with FreeSWITCH is only supported using Wanpipe + DAHDI, not in native Wanpipe mode. http://wiki.sangoma.com/FreeSWITCH-Dahdi-Mode The module you want to use is ftmod_analog Moises Silva Manager, Software Engineering msilva@sangoma.com<mailto:msilva@sangoma.com> Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada t. +1 800 388 2475<tel:%2B1%20800%20388%202475> (N. America) t. +1 905 474 1990 x128<tel:%2B1%20905%20474%201990%20x128> f. +1 905 474 9223<tel:%2B1%20905%20474%209223> <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> Products | Solutions | Events | Contact | Wiki | Facebook | Twitter`| | YouTube<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com Join Us At ClueCon - Aug 7-9, 2012 FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org<http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures> <http://www.sangoma.com/contact?utm_source=signature&utm_medium=email&utm_campaign=email+signatures>