On Mon, May 28, 2012 at 12:49 AM, copycall <dave@copycall.com> wrote:

curriegrad2004,

thanks for responding.

unfortunately, the sangoma tech support has not been as crack as usual.

i can go into the specifics, but it probably isn't necessary in a public forum. i'm not looking to piss anyone off.

if you have you actually configured a a101 sangoma card for a legacy CAS T1 card, i would greatly appreciate your assistance.

It's been a while since I configured for RBS, but I may be able to give you some pointers. Where are you at? did you have the drivers compiled?

http://wiki.sangoma.com/wanpipe-freeswitch-ftdm

As that web page states, RBS with FreeSWITCH is only supported using Wanpipe + DAHDI, not in native Wanpipe mode. http://wiki.sangoma.com/FreeSWITCH-Dahdi-Mode

The module you want to use is ftmod_analog

Moises Silva
Manager, Software Engineering

msilva@sangoma.com

Sangoma Technologies

100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada

t. +1 800 388 2475 (N. America)

t. +1 905 474 1990 x128

f. +1 905 474 9223