Has this issue been resolved. I am also having problems getting Sangoma A101D working on FS using and RBS T-1. Getting one way audio, out but not in.
Brian C. Edgar, Jr.
Senior Systems Administrator
Voice Systems Engineering Inc.
Email: bedgar@vseinc.com
Phone: 215-953-8568 x278
From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of copycall
Sent: Monday, May 28, 2012 5:53 PM
To: FreeSWITCH Users Help
Subject: Re: [Freeswitch-users] freeswitch - sangoma CAS T1 - a101 configuration
moises,
thank you for your response.
the T1 linecard at the end of this call is CAS T1, with B8ZS, and ESF, extended super frame, with E&M trunk signaling.
as i understand it, this is not robbed bit signaling, but a later variation of it.
i will paste the sangoma linecard config, below:
########################################################################
# Sangoma Wanpipe #
# Dahdi/Zaptel/SMG/TDMAPI/BOOT Configuration Script #
# v2.39 #
# Sangoma Technologies Inc. #
# Copyright(c) 2009. #
########################################################################
Would you like to change FreeSWITCH Configuration Directory?
Default: /usr/local/freeswitch/conf
1. NO
2. YES
[1-2, ENTER='NO']:NO
Error: Invalid option, input an integer
[1-2, ENTER='NO']:1
---------------------------------------------
Configuring T1/E1 cards [A101/A102/A104/A108]
---------------------------------------------
A101 detected on slot:4 bus:3
-----------------------------------------------------------
Configuring port 1 on A101 slot:4 bus:3.
-----------------------------------------------------------
Select media type for AFT-A101 on port 1 [slot:4 bus:3 span:1]
1. T1
2. E1
3. Unused
4. Exit
[1-4]:1
Configuring port 1 on AFT-A101 as: T1, coding:B8ZS, framing:ESF.
1. YES - Keep these settings
2. NO - Configure line coding and framing
[1-2, ENTER='YES']:YES
Error: Invalid option, input an integer
[1-2, ENTER='YES']:1
Select clock for AFT-A101 on port 1 [slot:4 bus:3 span:1]
1. NORMAL
2. MASTER
[1-2]:1
Select Switchtype for AFT-A101 on port 1 [slot:4 bus:3 span:1]
1. National
2. Nortel DMS100
3. Lucent 5ESS
4. Lucent 4ESS
[1-4]:1
Select signalling type for AFT-A101 on port 1 [slot:4 bus:3 span:1]
1. PRI CPE
2. PRI NET
[1-2]:1
Select dialplan context for AFT-A101 on port 1
1. default
2. public
3. Custom
[1-3]:1
Input the dialing group for this port
: 1
Would you like to enable hardware DTMF detection?
1. YES
2. NO
[1-2, ENTER='YES']:1
Would you like to enable hardware fax detection?
1. YES
2. NO
[1-2, ENTER='NO']:1
Port 1 on AFT-A101 configuration complete...
Press any key to continue:
T1/E1 card configuration complete.
Press any key to continue:
------------------------------------
Configuring ISDN BRI cards [A500/B700]
------------------------------------
No Sangoma ISDN BRI cards detected
Press any key to continue:
------------------------------------
Configuring GSM cards [W400]
------------------------------------
No Sangoma GSM cards detected
Press any key to continue:
------------------------------------
Configuring analog cards [A200/A400/B600/B610/B700/B800]
------------------------------------
------------------------------------
Configuring USB devices [U100]
------------------------------------
###################################################################
# SUMMARY #
###################################################################
1 T1/E1 port(s) detected, 1 configured
0 ISDN BRI port(s) detected, 0 configured
0 analog card(s) detected, 0 configured
0 GSM card(s) detected, 0 configured
0 usb device(s) detected, 0 configured
Configurator will create the following files:
1. Wanpipe config files in /etc/wanpipe
2. freetdm config file /usr/local/freeswitch/conf/freetdm.conf
3. freetdm_xml config file /usr/local/freeswitch/conf/freetdm.conf.xml
Your configuration has been saved in /etc/wanpipe/debug-2012-05-18.tgz.
When requesting support, email this file to techdesk@sangoma.com
###################################################################
Configuration Complete! Please select following:
1. YES - Continue
2. NO - Exit
[1-2]:1
Wanpipe configuration complete: choose action
1. Save cfg: Stop Wanpipe now
2. Do not save cfg: Exit
[1-2]:1
sh: asterisk: not found
sh: asterisk: not found
Stopping Wanpipe...
Removing old configuration files...
Copying new Wanpipe configuration files...
Copying new freetdm configuration files (/usr/local/freeswitch/conf/freetdm.conf)...
Copying new freetdm configuration files (/usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml)...
Wanrouter start complete...
Current boot level is 2
Wanrouter boot scripts configuration...
Removing existing wanrouter boot scripts...OK
Would you like wanrouter to start on system boot?
1. YES
2. NO
[1-2]:1
Verifying Zaptel boot scripts...
Enabling wanrouter init scripts ...(start:8, stop:91)
Sangoma cards configuration complete, exiting...
root@copycall:~#
thanks,
dave cook
On Mon, May 28, 2012 at 12:24 PM, Moises Silva <moises.silva@gmail.com> wrote:
On Mon, May 28, 2012 at 12:49 AM, copycall <dave@copycall.com> wrote:
curriegrad2004,
thanks for responding.
unfortunately, the sangoma tech support has not been as crack as usual.
i can go into the specifics, but it probably isn't necessary in a public forum. i'm not looking to piss anyone off.
if you have you actually configured a a101 sangoma card for a legacy CAS T1 card, i would greatly appreciate your assistance.
It's been a while since I configured for RBS, but I may be able to give you some pointers. Where are you at? did you have the drivers compiled?
As that web page states, RBS with FreeSWITCH is only supported using Wanpipe + DAHDI, not in native Wanpipe mode. http://wiki.sangoma.com/FreeSWITCH-Dahdi-Mode
The module you want to use is ftmod_analog
Moises Silva Sangoma Technologies 100 Renfrew Drive, Suite 100, Markham, ON L3R 9R6 Canada |
| |
Products | Solutions | Events | Contact | Wiki | Facebook | Twitter`| | YouTube | ||