Hello, I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground. I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system. My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone. They are being routed with a simple Linksys Etherfast router. My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 - 303. The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls. It doesn't matter which device I move 301 to it is only 301 that ever works. I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research. Thanks in advance, RJB
If you could shutdown all devices and then capturing SIP Trace while bringing up the device with #300 (or any # except #301) using Wireshark, it will definitely add more info for investigation. 2012/11/1 Rob Boutin <rjb@contactbeep.com>
Hello,****
** **
I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground.****
** **
I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system. ****
My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone. They are being routed with a simple Linksys Etherfast router.****
** **
My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 – 303. The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls. It doesn’t matter which device I move 301 to it is only 301 that ever works. I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research.****
** **
Thanks in advance,****
RJB****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you, Using this I was able to realize the embarrassingly simple solution. My XML editor at some point during my setup lost permission to change files in the FreeSWITCH folder and wasn't throwing errors for some reason. Thanks again, RJB From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Vitalie Colosov Sent: Thursday, November 01, 2012 3:44 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Just starting If you could shutdown all devices and then capturing SIP Trace while bringing up the device with #300 (or any # except #301) using Wireshark, it will definitely add more info for investigation. 2012/11/1 Rob Boutin <rjb@contactbeep.com> Hello, I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground. I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system. My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone. They are being routed with a simple Linksys Etherfast router. My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 - 303. The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls. It doesn't matter which device I move 301 to it is only 301 that ever works. I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research. Thanks in advance, RJB _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Alright so my phones have ring tones and can place calls to the predefined extensions (1000 - 1020) but upon trying to call one another it always says "temporarily unavailable" there is no difference in the actual extension files between the working ones and the new ones I defined but the server doesn't seem able to connect the calls from my new extensions to my other new extensions for some reason. Any ideas on this would be very helpful, and I feel like whatever this is should be the last issue I face. Thanks again, RJB From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Rob Boutin Sent: Friday, November 02, 2012 8:54 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Just starting Thank you, Using this I was able to realize the embarrassingly simple solution. My XML editor at some point during my setup lost permission to change files in the FreeSWITCH folder and wasn't throwing errors for some reason. Thanks again, RJB From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Vitalie Colosov Sent: Thursday, November 01, 2012 3:44 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Just starting If you could shutdown all devices and then capturing SIP Trace while bringing up the device with #300 (or any # except #301) using Wireshark, it will definitely add more info for investigation. 2012/11/1 Rob Boutin <rjb@contactbeep.com> Hello, I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground. I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system. My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone. They are being routed with a simple Linksys Etherfast router. My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 - 303. The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls. It doesn't matter which device I move 301 to it is only 301 that ever works. I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research. Thanks in advance, RJB _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
look in dialplan/default.xml at Local_Extension <condition field="destination_number" expression="^(10[01][0-9])$"> Change that regex to also cover your new extensions. You may find some use on the wiki section on xml dialplan or possibly one of our tech books. On Fri, Nov 2, 2012 at 9:48 AM, Rob Boutin <rjb@contactbeep.com> wrote:
Alright so my phones have ring tones and can place calls to the predefined extensions (1000 – 1020) but upon trying to call one another it always says “temporarily unavailable” there is no difference in the actual extension files between the working ones and the new ones I defined but the server doesn’t seem able to connect the calls from my new extensions to my other new extensions for some reason. ****
** **
Any ideas on this would be very helpful, and I feel like whatever this is should be the last issue I face.****
** **
** **
Thanks again,****
RJB ****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Rob Boutin *Sent:* Friday, November 02, 2012 8:54 AM
*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Just starting****
** **
Thank you, ****
** **
Using this I was able to realize the embarrassingly simple solution.****
My XML editor at some point during my setup lost permission to change files in the FreeSWITCH folder and wasn’t throwing errors for some reason. ****
** **
** **
Thanks again,****
RJB****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org<freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Vitalie Colosov *Sent:* Thursday, November 01, 2012 3:44 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Just starting****
** **
If you could shutdown all devices and then capturing SIP Trace while bringing up the device with #300 (or any # except #301) using Wireshark, it will definitely add more info for investigation.****
** **
2012/11/1 Rob Boutin <rjb@contactbeep.com>****
Hello,****
****
I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground.****
****
I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system. ****
My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone. They are being routed with a simple Linksys Etherfast router.****
****
My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 – 303. The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls. It doesn’t matter which device I move 301 to it is only 301 that ever works. I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research.****
****
Thanks in advance,****
RJB****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****
** **
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
It should be another simple issue. Check your default.xml dialplan. It has entries for 1000-1020 numbers, but you must similarly add for your new #s. 2012/11/2 Rob Boutin <rjb@contactbeep.com>
Alright so my phones have ring tones and can place calls to the predefined extensions (1000 – 1020) but upon trying to call one another it always says “temporarily unavailable” there is no difference in the actual extension files between the working ones and the new ones I defined but the server doesn’t seem able to connect the calls from my new extensions to my other new extensions for some reason. ****
** **
Any ideas on this would be very helpful, and I feel like whatever this is should be the last issue I face.****
** **
** **
Thanks again,****
RJB ****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Rob Boutin *Sent:* Friday, November 02, 2012 8:54 AM
*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Just starting****
** **
Thank you, ****
** **
Using this I was able to realize the embarrassingly simple solution.****
My XML editor at some point during my setup lost permission to change files in the FreeSWITCH folder and wasn’t throwing errors for some reason. ****
** **
** **
Thanks again,****
RJB****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org<freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Vitalie Colosov *Sent:* Thursday, November 01, 2012 3:44 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Just starting****
** **
If you could shutdown all devices and then capturing SIP Trace while bringing up the device with #300 (or any # except #301) using Wireshark, it will definitely add more info for investigation.****
** **
2012/11/1 Rob Boutin <rjb@contactbeep.com>****
Hello,****
****
I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground.****
****
I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system. ****
My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone. They are being routed with a simple Linksys Etherfast router.****
****
My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 – 303. The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls. It doesn’t matter which device I move 301 to it is only 301 that ever works. I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research.****
****
Thanks in advance,****
RJB****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****
** **
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Anthony Minessale
-
Rob Boutin
-
Vitalie Colosov