If you could shutdown all devices and then capturing SIP Trace while bringing up the device with #300 (or any # except #301) using Wireshark, it will definitely add more info for investigation.


2012/11/1 Rob Boutin <rjb@contactbeep.com>

Hello,

 

I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground.

 

I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system.

My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone.  They are being routed with a simple Linksys Etherfast router.

 

My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 – 303.  The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls.  It doesn’t matter which device I move 301 to it is only 301 that ever works.  I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research.

 

Thanks in advance,

RJB


_________________________________________________________________________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com

FreeSWITCH-powered IP PBX: The CudaTel Communication Server
http://www.cudatel.com

Official FreeSWITCH Sites
http://www.freeswitch.org
http://wiki.freeswitch.org
http://www.cluecon.com

FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org