It should be another simple issue. Check your default.xml dialplan. It has entries for 1000-1020 numbers, but you must similarly add for your new #s. 2012/11/2 Rob Boutin <rjb@contactbeep.com>
Alright so my phones have ring tones and can place calls to the predefined extensions (1000 – 1020) but upon trying to call one another it always says “temporarily unavailable” there is no difference in the actual extension files between the working ones and the new ones I defined but the server doesn’t seem able to connect the calls from my new extensions to my other new extensions for some reason. ****
** **
Any ideas on this would be very helpful, and I feel like whatever this is should be the last issue I face.****
** **
** **
Thanks again,****
RJB ****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [mailto: freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Rob Boutin *Sent:* Friday, November 02, 2012 8:54 AM
*To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Just starting****
** **
Thank you, ****
** **
Using this I was able to realize the embarrassingly simple solution.****
My XML editor at some point during my setup lost permission to change files in the FreeSWITCH folder and wasn’t throwing errors for some reason. ****
** **
** **
Thanks again,****
RJB****
** **
*From:* freeswitch-users-bounces@lists.freeswitch.org [ mailto:freeswitch-users-bounces@lists.freeswitch.org<freeswitch-users-bounces@lists.freeswitch.org>] *On Behalf Of *Vitalie Colosov *Sent:* Thursday, November 01, 2012 3:44 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] Just starting****
** **
If you could shutdown all devices and then capturing SIP Trace while bringing up the device with #300 (or any # except #301) using Wireshark, it will definitely add more info for investigation.****
** **
2012/11/1 Rob Boutin <rjb@contactbeep.com>****
Hello,****
****
I am just starting out with FreeSWITCH and I am researching it for a project at work that will hopefully end up with full implementation of FreeSWITCH and had a few short questions as I am having difficulties getting it off the ground.****
****
I am currently running FreeSWITCH on a Windows 7 enterprise 64-bit system. ****
My tiny test network of phones includes an xlite softphone on the windows machine 2 Linksys SPA922 phones and 1 Linksys SPA942 phone. They are being routed with a simple Linksys Etherfast router.****
****
My issue is that only one phone at a time will ever be registered and able to make calls. I have four extensions configured with identical settings 300 – 303. The peculiar thing is only the phone assigned to 301 will ever have a dial tone and be able to place calls. It doesn’t matter which device I move 301 to it is only 301 that ever works. I was hoping to get some light shed on this, as it is likely related to some simple setting I over looked and would like to continue with my research.****
****
Thanks in advance,****
RJB****
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org****
** **
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org