Does freeswitch forks his processes?
Hey guys, I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS: http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy. Test is: sipp -> freeswitch -> sipp Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice? Thank you all
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files. After it starts it drops privileges to those specified on the command line with –u and –g switches. FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads? top –H shows each thread. --- Bote FreeSWITCH Docs Janitor <http://freeswitch.org/confluence> http://freeswitch.org/confluence From: Vladislav Ivanov Sent: Tuesday, 02 February, 2016 07:09 Subject: [Freeswitch-users] Does freeswitch forks his processes? Hey guys, I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS: http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy. Test is: sipp -> freeswitch -> sipp Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice? Thank you all
I've just stumpled over this:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences? Best regards Peter On 02/02/16 13:58, Bote Man wrote:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files.
After it starts it drops privileges to those specified on the command line with --u and --g switches.
FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads?
top --H shows each thread.
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:*Vladislav Ivanov *Sent:* Tuesday, 02 February, 2016 07:09 *Subject:* [Freeswitch-users] Does freeswitch forks his processes?
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach Telefaks Services GmbH mailto:lists (att) telefaks.de Internet: www.telefaks.de
"Run as" != "Start as" If you insist on not starting FS as root to let it change user, like most other daemons/services, you'll have to jump through a bunch of extra steps using file system capabilities to give it the ability to set scheduler parameters/etc that are restricted to root normally. -- Nathan On 02/02/2016 09:10 AM, Peter Steinbach wrote:
I've just stumpled over this:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences?
Best regards Peter
On 02/02/16 13:58, Bote Man wrote:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files.
After it starts it drops privileges to those specified on the command line with –u and –g switches.
FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads?
top –H shows each thread.
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:*Vladislav Ivanov *Sent:* Tuesday, 02 February, 2016 07:09 *Subject:* [Freeswitch-users] Does freeswitch forks his processes?
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach
Telefaks Services GmbH mailto:lists (att) telefaks.de Internet:www.telefaks.de
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect
Hey guys, It is true, I haven't ran it as root, I fixed it. But I still have issues with passing more than 50cps, same is happening... 4 cores CPU - CPU is good, 80% idle, load average: 0.81, 0.98 This at 25 cps (I bridge the call, so cps*2) Then I add 5 cps more: load average: 1061.40, 333.52 And all OS start's lagging as hell, and i'm unable to find issue, have no idea what is happening... My settings: http://pastebin.com/62B45z4i Anything I'm missing? Really strange that CPU drops like that... 2016-02-02 17:22 GMT+02:00 Nathan Neulinger <nneul@mst.edu>:
"Run as" != "Start as"
If you insist on not starting FS as root to let it change user, like most other daemons/services, you'll have to jump through a bunch of extra steps using file system capabilities to give it the ability to set scheduler parameters/etc that are restricted to root normally.
-- Nathan
On 02/02/2016 09:10 AM, Peter Steinbach wrote:
I've just stumpled over this:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences?
Best regards Peter
On 02/02/16 13:58, Bote Man wrote:
Is FreeSWITCH starting with root permissions? It needs this in order to
use the FIFO scheduler and access realtime
threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files.
After it starts it drops privileges to those specified on the command line with –u and –g switches.
FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads?
top –H shows each thread.
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:*Vladislav Ivanov *Sent:* Tuesday, 02 February, 2016 07:09 *Subject:* [Freeswitch-users] Does freeswitch forks his processes?
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach
Telefaks Services GmbH mailto:lists (att) telefaks.de Internet:www.telefaks.de
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
by default FreeSWITCH has a limit of 30cps... You must edit config files to change that... On Thu, Feb 11, 2016 at 1:16 PM, Vladislav Ivanov <deforceczt@gmail.com> wrote:
Hey guys,
It is true, I haven't ran it as root, I fixed it. But I still have issues with passing more than 50cps, same is happening... 4 cores CPU - CPU is good, 80% idle, load average: 0.81, 0.98 This at 25 cps (I bridge the call, so cps*2) Then I add 5 cps more: load average: 1061.40, 333.52 And all OS start's lagging as hell, and i'm unable to find issue, have no idea what is happening...
My settings: http://pastebin.com/62B45z4i
Anything I'm missing? Really strange that CPU drops like that...
2016-02-02 17:22 GMT+02:00 Nathan Neulinger <nneul@mst.edu>:
"Run as" != "Start as"
If you insist on not starting FS as root to let it change user, like most other daemons/services, you'll have to jump through a bunch of extra steps using file system capabilities to give it the ability to set scheduler parameters/etc that are restricted to root normally.
-- Nathan
On 02/02/2016 09:10 AM, Peter Steinbach wrote:
I've just stumpled over this:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences?
Best regards Peter
On 02/02/16 13:58, Bote Man wrote:
Is FreeSWITCH starting with root permissions? It needs this in order
to use the FIFO scheduler and access realtime
threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files.
After it starts it drops privileges to those specified on the command line with –u and –g switches.
FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads?
top –H shows each thread.
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:*Vladislav Ivanov *Sent:* Tuesday, 02 February, 2016 07:09 *Subject:* [Freeswitch-users] Does freeswitch forks his processes?
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach
Telefaks Services GmbH mailto:lists (att) telefaks.de Internet:www.telefaks.de
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
I sense that your load testing method is flawed and you're just DDoSing the box. On Thu, Feb 11, 2016 at 6:16 AM, Vladislav Ivanov <deforceczt@gmail.com> wrote:
Hey guys,
It is true, I haven't ran it as root, I fixed it. But I still have issues with passing more than 50cps, same is happening... 4 cores CPU - CPU is good, 80% idle, load average: 0.81, 0.98 This at 25 cps (I bridge the call, so cps*2) Then I add 5 cps more: load average: 1061.40, 333.52 And all OS start's lagging as hell, and i'm unable to find issue, have no idea what is happening...
My settings: http://pastebin.com/62B45z4i
Anything I'm missing? Really strange that CPU drops like that...
2016-02-02 17:22 GMT+02:00 Nathan Neulinger <nneul@mst.edu>:
"Run as" != "Start as"
If you insist on not starting FS as root to let it change user, like most other daemons/services, you'll have to jump through a bunch of extra steps using file system capabilities to give it the ability to set scheduler parameters/etc that are restricted to root normally.
-- Nathan
On 02/02/2016 09:10 AM, Peter Steinbach wrote:
I've just stumpled over this:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences?
Best regards Peter
On 02/02/16 13:58, Bote Man wrote:
Is FreeSWITCH starting with root permissions? It needs this in order
to use the FIFO scheduler and access realtime
threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files.
After it starts it drops privileges to those specified on the command line with –u and –g switches.
FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads?
top –H shows each thread.
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:*Vladislav Ivanov *Sent:* Tuesday, 02 February, 2016 07:09 *Subject:* [Freeswitch-users] Does freeswitch forks his processes?
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach
Telefaks Services GmbH mailto:lists (att) telefaks.de Internet:www.telefaks.de
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
I have changed it: <param name="sessions-per-second" value="400"/> If there was limit - there would be no CPU hogging. Here is status command: FreeSWITCH (Version 1.6.6 git d2d0b32 2016-01-11 20:16:12Z 64bit) is ready 0 session(s) since startup 0 session(s) - peak 0, last 5min 0 0 session(s) per Sec out of max 400, peak 0, last 5min 0 10000 session(s) max min idle cpu 0.00/100.00 Current Stack Size/Max 240K/8192K I can believe that i'm just DDoSing my box. I'm using simple uac/uas from sipp, and certain load is ok, but after that it goes straight down with increase of just 5 cps... I mean it is strange that with 20 cps it's 25% loaded and with 25 cps it's 100% loaded. 2016-02-11 16:38 GMT+02:00 Brian West <brian@freeswitch.org>:
I sense that your load testing method is flawed and you're just DDoSing the box.
On Thu, Feb 11, 2016 at 6:16 AM, Vladislav Ivanov <deforceczt@gmail.com> wrote:
Hey guys,
It is true, I haven't ran it as root, I fixed it. But I still have issues with passing more than 50cps, same is happening... 4 cores CPU - CPU is good, 80% idle, load average: 0.81, 0.98 This at 25 cps (I bridge the call, so cps*2) Then I add 5 cps more: load average: 1061.40, 333.52 And all OS start's lagging as hell, and i'm unable to find issue, have no idea what is happening...
My settings: http://pastebin.com/62B45z4i
Anything I'm missing? Really strange that CPU drops like that...
2016-02-02 17:22 GMT+02:00 Nathan Neulinger <nneul@mst.edu>:
"Run as" != "Start as"
If you insist on not starting FS as root to let it change user, like most other daemons/services, you'll have to jump through a bunch of extra steps using file system capabilities to give it the ability to set scheduler parameters/etc that are restricted to root normally.
-- Nathan
On 02/02/2016 09:10 AM, Peter Steinbach wrote:
I've just stumpled over this:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences?
Best regards Peter
On 02/02/16 13:58, Bote Man wrote:
Is FreeSWITCH starting with root permissions? It needs this in order
to use the FIFO scheduler and access realtime
threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files.
After it starts it drops privileges to those specified on the command line with –u and –g switches.
FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads?
top –H shows each thread.
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:*Vladislav Ivanov *Sent:* Tuesday, 02 February, 2016 07:09 *Subject:* [Freeswitch-users] Does freeswitch forks his processes?
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach
Telefaks Services GmbH mailto:lists (att) telefaks.de Internet:www.telefaks.de
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Without specific details about what the CPU is, how many there are and the version of the OS and many other factors its not easy to answer you. We frown on these load questions because, just like now, it results in large threads and many people spending a lot of time trying to understand the parameters. On Thu, Feb 11, 2016 at 8:45 AM, Vladislav Ivanov <deforceczt@gmail.com> wrote:
I have changed it: <param name="sessions-per-second" value="400"/>
If there was limit - there would be no CPU hogging. Here is status command: FreeSWITCH (Version 1.6.6 git d2d0b32 2016-01-11 20:16:12Z 64bit) is ready 0 session(s) since startup 0 session(s) - peak 0, last 5min 0 0 session(s) per Sec out of max 400, peak 0, last 5min 0 10000 session(s) max min idle cpu 0.00/100.00 Current Stack Size/Max 240K/8192K
I can believe that i'm just DDoSing my box. I'm using simple uac/uas from sipp, and certain load is ok, but after that it goes straight down with increase of just 5 cps... I mean it is strange that with 20 cps it's 25% loaded and with 25 cps it's 100% loaded.
2016-02-11 16:38 GMT+02:00 Brian West <brian@freeswitch.org>:
I sense that your load testing method is flawed and you're just DDoSing the box.
On Thu, Feb 11, 2016 at 6:16 AM, Vladislav Ivanov <deforceczt@gmail.com> wrote:
Hey guys,
It is true, I haven't ran it as root, I fixed it. But I still have issues with passing more than 50cps, same is happening... 4 cores CPU - CPU is good, 80% idle, load average: 0.81, 0.98 This at 25 cps (I bridge the call, so cps*2) Then I add 5 cps more: load average: 1061.40, 333.52 And all OS start's lagging as hell, and i'm unable to find issue, have no idea what is happening...
My settings: http://pastebin.com/62B45z4i
Anything I'm missing? Really strange that CPU drops like that...
2016-02-02 17:22 GMT+02:00 Nathan Neulinger <nneul@mst.edu>:
"Run as" != "Start as"
If you insist on not starting FS as root to let it change user, like most other daemons/services, you'll have to jump through a bunch of extra steps using file system capabilities to give it the ability to set scheduler parameters/etc that are restricted to root normally.
-- Nathan
On 02/02/2016 09:10 AM, Peter Steinbach wrote:
I've just stumpled over this:
Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences?
Best regards Peter
On 02/02/16 13:58, Bote Man wrote:
Is FreeSWITCH starting with root permissions? It needs this in order
to use the FIFO scheduler and access realtime
threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the config files.
After it starts it drops privileges to those specified on the command line with –u and –g switches.
FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads?
top –H shows each thread.
---
Bote
FreeSWITCH Docs Janitor
http://freeswitch.org/confluence
*From:*Vladislav Ivanov *Sent:* Tuesday, 02 February, 2016 07:09 *Subject:* [Freeswitch-users] Does freeswitch forks his processes?
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach
Telefaks Services GmbH mailto:lists (att) telefaks.de Internet:www.telefaks.de
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>* ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
:)) guys like talk about fast cars and :)) On Thu, Feb 11, 2016 at 5:15 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
Without specific details about what the CPU is, how many there are and the version of the OS and many other factors its not easy to answer you. We frown on these load questions because, just like now, it results in large threads and many people spending a lot of time trying to understand the parameters.
On Thu, Feb 11, 2016 at 8:45 AM, Vladislav Ivanov <deforceczt@gmail.com> wrote:
I have changed it: <param name="sessions-per-second" value="400"/>
If there was limit - there would be no CPU hogging. Here is status command: FreeSWITCH (Version 1.6.6 git d2d0b32 2016-01-11 20:16:12Z 64bit) is ready 0 session(s) since startup 0 session(s) - peak 0, last 5min 0 0 session(s) per Sec out of max 400, peak 0, last 5min 0 10000 session(s) max min idle cpu 0.00/100.00 Current Stack Size/Max 240K/8192K
I can believe that i'm just DDoSing my box. I'm using simple uac/uas from sipp, and certain load is ok, but after that it goes straight down with increase of just 5 cps... I mean it is strange that with 20 cps it's 25% loaded and with 25 cps it's 100% loaded.
2016-02-11 16:38 GMT+02:00 Brian West <brian@freeswitch.org>:
I sense that your load testing method is flawed and you're just DDoSing the box.
On Thu, Feb 11, 2016 at 6:16 AM, Vladislav Ivanov <deforceczt@gmail.com> wrote:
Hey guys,
It is true, I haven't ran it as root, I fixed it. But I still have issues with passing more than 50cps, same is happening... 4 cores CPU - CPU is good, 80% idle, load average: 0.81, 0.98 This at 25 cps (I bridge the call, so cps*2) Then I add 5 cps more: load average: 1061.40, 333.52 And all OS start's lagging as hell, and i'm unable to find issue, have no idea what is happening...
My settings: http://pastebin.com/62B45z4i
Anything I'm missing? Really strange that CPU drops like that...
2016-02-02 17:22 GMT+02:00 Nathan Neulinger <nneul@mst.edu>:
"Run as" != "Start as"
If you insist on not starting FS as root to let it change user, like most other daemons/services, you'll have to jump through a bunch of extra steps using file system capabilities to give it the ability to set scheduler parameters/etc that are restricted to root normally.
-- Nathan
On 02/02/2016 09:10 AM, Peter Steinbach wrote:
I've just stumpled over this: >Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime threads. If not started as root, this would explain your CPS limitations.
We like to run Freeswitch as a non privileged user, due to security concerns. So there are drawbacks here compared to running FS as root? Can we somehow quantify the differences?
Best regards Peter
On 02/02/16 13:58, Bote Man wrote: > > Is FreeSWITCH starting with root permissions? It needs this in order to use the FIFO scheduler and access realtime > threads. If not started as root, this would explain your CPS limitations. There are also limits that can be set in the > config files. > > After it starts it drops privileges to those specified on the command line with –u and –g switches. > > FreeSWITCH uses multi-threading. I do not know about htop, but maybe it is showing the multiple threads? > > top –H shows each thread. > > --- > > Bote > > FreeSWITCH Docs Janitor > > http://freeswitch.org/confluence > > *From:*Vladislav Ivanov > *Sent:* Tuesday, 02 February, 2016 07:09 > *Subject:* [Freeswitch-users] Does freeswitch forks his processes? > > Hey guys, > > I have a question about freeswitch process/threading usage. > So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. > http://i.imgur.com/bdbYOwp.png > > But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: > http://i.imgur.com/VNpl55z.jpg > > I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. > Be it physical or virtual environment I cant pass the 50 cps mark. > I have strange issue with CPU usage on same CPS: > > http://i.imgur.com/8BdQWVL.png > http://i.imgur.com/mWRnoGr.png > > I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. > I have tested configuration on: > Debian 8 > 2 core/8 gb ram > 4 core/8 gb ram (graphs are from here) > 8 core/32 gb ram > > and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to > respond really laggy. > > Test is: > sipp -> freeswitch -> sipp > > Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... > Any advice? > > Thank you all > > > > > >
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
-- With kind regards Peter Steinbach
Telefaks Services GmbH mailto:lists (att) telefaks.de Internet:www.telefaks.de
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- ------------------------------------------------------------ Nathan Neulinger nneul@mst.edu Missouri S&T Information Technology (573) 612-1412 System Administrator - Architect
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>*
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900
https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
FreeSWITCH is a single process, multi-threading application. htop is showing you threads activity. On 2 February 2016 at 13:08, Vladislav Ivanov <deforceczt@gmail.com> wrote:
Hey guys,
I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png
But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg
I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS:
http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png
I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram
and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy.
Test is: sipp -> freeswitch -> sipp
Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice?
Thank you all
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
FreeSWITCH uses threading… in modern linux kernels threading and forking are very similar… if you look in top you’ll only see 1 FS process that’s because top by default rolls up all the threads… htop on the other hand by default shows you the individual threads. In FreeSWITCH there are several threads running on just a base idle FreeSWITCH process. Each addition call leg is atleast 1 more thread. Depending on which applications are actually active on a call, there could be more then 1 thread per call leg. On the load testing and load handling capabilities this is something the FS team typically does not support on the open source side. I would recommend contacting consulting@freeswitch.org <mailto:consulting@freeswitch.org> to get the pros involved. There are a lot of factors to take into consideration and just 1 param can make orders of magnitude difference from test to test K From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Vladislav Ivanov Sent: Tuesday, February 2, 2016 6:09 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] Does freeswitch forks his processes? Hey guys, I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS: http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy. Test is: sipp -> freeswitch -> sipp Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice? Thank you all
participants (9)
-
Anthony Minessale
-
Bote Man
-
Brian West
-
Giacomo Vacca
-
Giovanni Maruzzelli
-
Ken Rice
-
Nathan Neulinger
-
Peter Steinbach
-
Vladislav Ivanov