Hey guys, I have a question about freeswitch process/threading usage. So far that I haven't noticed freeswitch to fork himself, I have only 1 freeswitch instance. http://i.imgur.com/bdbYOwp.png But then I found screenshot of htop with freeswitch and noticed that there is multiple freeswitch processes being run: http://i.imgur.com/VNpl55z.jpg I'm having issues with "loading" the freeswitch after 50 cps in any cpu/ram configuration. Be it physical or virtual environment I cant pass the 50 cps mark. I have strange issue with CPU usage on same CPS: http://i.imgur.com/8BdQWVL.png http://i.imgur.com/mWRnoGr.png I timeload test freeswitch with 50cps for 5+ hours, and seems like there is some kind of leak somewhere. I have tested configuration on: Debian 8 2 core/8 gb ram 4 core/8 gb ram (graphs are from here) 8 core/32 gb ram and in all the tests I were not able to send more than 50 cps without CPU dropping to 0 with all system starting to respond really laggy. Test is: sipp -> freeswitch -> sipp Just 1 dialpeer with bridge action. No gateways. Just simple dialplan and 1 profile... Any advice? Thank you all