Hello, I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces: Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000 Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated. Best, Max
Try sangoma Netborder Express , a very cost effective solution and work well in linux too On Thu, May 6, 2010 at 8:06 PM, Max Clark <max.clark@gmail.com> wrote:
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Best Regards G.Imthiyaz Ahmed PeopleTech systems (P) ltd http://peopletech.co.in
Hi Max, We've been having good results with the Aculab ApplianX gateways. Regards, Tjardick On 06 May 2010, at 16:36, Max Clark wrote:
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling - R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc... In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box. Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________ Hotmail: Powerful Free email with security by Microsoft. https://signup.live.com/signup.aspx?id=60969
If I alter my requirement a little and say that I want to purchase an appliance to give to a non-technical end user that I will not have to support long term what's my best bet? Audiocodes seems incredibly expensive - is it worth it? Cisco 5350 seems to be easily found on the secondary market. Is the configuration/feature set usable? I am investigating Aculab which seems interesting - anything else I should look at? Thanks, Max On Thu, May 6, 2010 at 8:49 AM, Jan Berger <janvb@live.com> wrote:
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling
- R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc...
In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box.
Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I've had good experiences with the Patton SN4960 in this situation. Campbell On Fri, May 7, 2010 at 10:41 AM, Max Clark <max.clark@gmail.com> wrote:
If I alter my requirement a little and say that I want to purchase an appliance to give to a non-technical end user that I will not have to support long term what's my best bet?
Audiocodes seems incredibly expensive - is it worth it? Cisco 5350 seems to be easily found on the secondary market. Is the configuration/feature set usable? I am investigating Aculab which seems interesting - anything else I should look at?
Thanks, Max
On Thu, May 6, 2010 at 8:49 AM, Jan Berger <janvb@live.com> wrote:
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling
- R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc...
In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box.
Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
AS5300 series are great T1 gateways. If you are purchasing off of ebay, make sure you get one tagged "VoIP" there are 2 different cards that can go in these things one is MICA modems which will do you no good. The other is the DSP cards which is what you want. You can barely give away MICA Modems these days (I have several if anyone wants them you pay shipping lol) K On 5/6/10 5:41 PM, "Max Clark" <max.clark@gmail.com> wrote:
If I alter my requirement a little and say that I want to purchase an appliance to give to a non-technical end user that I will not have to support long term what's my best bet?
Audiocodes seems incredibly expensive - is it worth it? Cisco 5350 seems to be easily found on the secondary market. Is the configuration/feature set usable? I am investigating Aculab which seems interesting - anything else I should look at?
Thanks, Max
On Thu, May 6, 2010 at 8:49 AM, Jan Berger <janvb@live.com> wrote:
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling
- R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc...
In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box.
Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ken Rice? Where the heck have you been? On Thu, May 6, 2010 at 5:56 PM, Ken Rice <krice@freeswitch.org> wrote:
AS5300 series are great T1 gateways. If you are purchasing off of ebay, make sure you get one tagged "VoIP" there are 2 different cards that can go in these things one is MICA modems which will do you no good. The other is the DSP cards which is what you want. You can barely give away MICA Modems these days (I have several if anyone wants them you pay shipping lol)
K
On 5/6/10 5:41 PM, "Max Clark" <max.clark@gmail.com> wrote:
If I alter my requirement a little and say that I want to purchase an appliance to give to a non-technical end user that I will not have to support long term what's my best bet?
Audiocodes seems incredibly expensive - is it worth it? Cisco 5350 seems to be easily found on the secondary market. Is the configuration/feature set usable? I am investigating Aculab which seems interesting - anything else I should look at?
Thanks, Max
On Thu, May 6, 2010 at 8:49 AM, Jan Berger <janvb@live.com> wrote:
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling
- R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc...
In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box.
Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
Rising from the shadows like phoenix... JM On Thu, May 6, 2010 at 8:17 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
Ken Rice? Where the heck have you been?
On Thu, May 6, 2010 at 5:56 PM, Ken Rice <krice@freeswitch.org> wrote:
AS5300 series are great T1 gateways. If you are purchasing off of ebay, make sure you get one tagged "VoIP" there are 2 different cards that can go in these things one is MICA modems which will do you no good. The other is the DSP cards which is what you want. You can barely give away MICA Modems these days (I have several if anyone wants them you pay shipping lol)
K
On 5/6/10 5:41 PM, "Max Clark" <max.clark@gmail.com> wrote:
If I alter my requirement a little and say that I want to purchase an appliance to give to a non-technical end user that I will not have to support long term what's my best bet?
Audiocodes seems incredibly expensive - is it worth it? Cisco 5350 seems to be easily found on the secondary market. Is the configuration/feature set usable? I am investigating Aculab which seems interesting - anything else I should look at?
Thanks, Max
On Thu, May 6, 2010 at 8:49 AM, Jan Berger <janvb@live.com> wrote:
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling
- R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc...
In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box.
Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I do not know about digital audiocodes but I had horrible experiences with analog Audiocodes gateways. The crappy device every once in a while simply looses IP connectivity and it was painful to get it back, I even had to reset to factory defaults several times . Consider the fact that you may be miles away from the site and you will understand why I find them painful. Audiocodes support is also crap. you can only try to get support through your reseller. +1 for Patton 4960 Smartware firmware is really powerful and stable with more than 8 years of development. CLI is nice and powerful as well, debugging through CLI can help a lot. I don't like the Web interface and find it confusing but GUIs never appealed to me :p Smartware documentation is good as well. At least for analog gateways SNMP MIBs are alright but not very helpful to monitor every aspect you can think of, but I think the 4960 may include more than the analog ones, you can also find documentation on available MIBs. You can get support directly from Patton. I have several analog ones in production and never had to deal with them for over a year. My 2 cents and humble opinion. Hope it helps
yo ken, is your IM / IRC client broken ?? :) oh yea... back on topic.. Audiocodes Mediant 2k's can go for reasonable prices on ebay. worth a look... J On Fri, May 7, 2010 at 9:17 AM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
Ken Rice? Where the heck have you been?
On Thu, May 6, 2010 at 5:56 PM, Ken Rice <krice@freeswitch.org> wrote:
AS5300 series are great T1 gateways. If you are purchasing off of ebay, make sure you get one tagged "VoIP" there are 2 different cards that can go in these things one is MICA modems which will do you no good. The other is the DSP cards which is what you want. You can barely give away MICA Modems these days (I have several if anyone wants them you pay shipping lol)
K
On 5/6/10 5:41 PM, "Max Clark" <max.clark@gmail.com> wrote:
If I alter my requirement a little and say that I want to purchase an appliance to give to a non-technical end user that I will not have to support long term what's my best bet?
Audiocodes seems incredibly expensive - is it worth it? Cisco 5350 seems to be easily found on the secondary market. Is the configuration/feature set usable? I am investigating Aculab which seems interesting - anything else I should look at?
Thanks, Max
On Thu, May 6, 2010 at 8:49 AM, Jan Berger <janvb@live.com> wrote:
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling
- R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc...
In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box.
Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely Jay
Most legacy PBX's can actually add SIP trunking in software and upgrade.
Date: Thu, 6 May 2010 15:41:15 -0700 From: max.clark@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] 4x T1 PRI Gateway
If I alter my requirement a little and say that I want to purchase an appliance to give to a non-technical end user that I will not have to support long term what's my best bet?
Audiocodes seems incredibly expensive - is it worth it? Cisco 5350 seems to be easily found on the secondary market. Is the configuration/feature set usable? I am investigating Aculab which seems interesting - anything else I should look at?
Thanks, Max
On Thu, May 6, 2010 at 8:49 AM, Jan Berger <janvb@live.com> wrote:
What signalling protocol will you use to connect to the legacy PBX and how much work are you prepard to do yourself? It's critical that you get exact information on your legacy PBX signalling
- R1 - R2 - DMS - AT&T - ANSI ISDN - SS7 etc...
In general - FreeSWITCH can do it with a medium PC and a 4 x T1 card from Sangoma etc. The cost for a 4xT1 solution will be significantly cheaper than anything than a so-called plug & play box.
Jan
Date: Thu, 6 May 2010 07:36:04 -0700 From: max.clark@gmail.com To: Freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] 4x T1 PRI Gateway
Hello,
I am looking for a 4 port T1/PRI to SIP gateway to interconnect a legacy PBX to a SIP trunk. After spending some time with Google I have come up with the following list of devices that fit the required number of T1 interfaces:
Dialogic DMG2120DTI Cisco AS5350 Quintum Tenor DX Patton SmartNode 4960 Audiocodes Mediant 1000/2000
Any opinions, personal experiences, advice, or additional devices I should be looking at would be greatly appreciated.
Best, Max
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
________________________________ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________ Hotmail: Free, trusted and rich email service. https://signup.live.com/signup.aspx?id=60969
participants (11)
-
Anthony Minessale
-
Brian West
-
Campbell Steven
-
Imthiyaz Ahmed
-
Jan Berger
-
jay binks
-
João Mesquita
-
Ken Rice
-
Luis F Urrea
-
Max Clark
-
Tjardick van der Kraan