How to turn off SW DTMF detect (for DTMF talkoff issue)
Our Freeswitch implementation has two second audio dropouts on calls that pass through the Sangoma PRI card caused by DTMF talkoff. We know how to turn HW DTMF detection off, but then FS automatically enables software DTMF detect. How do we prevent SW DTMF detection in FS? Our attempt to manage when HW DTMF detection is active is not very clean (see pastebin report of things we tried at http://pastebin.freeswitch.org/12923). I tried using the start_dtmf and stop_dtmf applications in the dialplan but they didn't work to prevent talkoff or splits, and the stop_dtmf application stopped audio for internal calls. Is there a better way to control HW DTMF detection or DTMF line splits from the dialplan? Thanks, Bob Robert
I have never seen these dropouts and we use the dtmf detection without issue. Try contacting sangoma to see if they have a fix for this, I suspect they do already have this in a newer release. Mike On May 6, 2010, at 2:59 PM, Robert Hadley wrote:
Our Freeswitch implementation has two second audio dropouts on calls that pass through the Sangoma PRI card caused by DTMF talkoff.
We know how to turn HW DTMF detection off, but then FS automatically enables software DTMF detect. How do we prevent SW DTMF detection in FS?
Our attempt to manage when HW DTMF detection is active is not very clean (see pastebin report of things we tried at http://pastebin.freeswitch.org/12923).
I tried using the start_dtmf and stop_dtmf applications in the dialplan but they didn’t work to prevent talkoff or splits, and the stop_dtmf application stopped audio for internal calls. Is there a better way to control HW DTMF detection or DTMF line splits from the dialplan?
participants (2)
-
Michael Jerris
-
Robert Hadley