hi, i have 2 setups running FS with the exact same profile and dialplan, one running on windows and the other on a raspberry pi, both receive calls from registered clients and forward to a remote gateway, the problem is when client sends dtmf, the windows FS forwards to gateway without issues but on the rpi most of the times fs isnt able to detect dtmf or at times detects but doesnt or partially sends to gateway. i have been banging my head with this from a few days but no idea whats going wrong, the client sending to rpi FS i even made him send call to gateway directly and then that works so this rules out client issue, no idea whats wrong with FS, both are on the latest build im using g711u throughout -- Regards, Bipin ------------------------------------------------------------------------
Its a little unclear, you say 'detect', so I have to assume you're running a dtmf detector. You're running on x86 vs arm, so I can only assume its possibly that differences in architecture are at play here. /b On Thu, Jun 8, 2017 at 10:41 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have 2 setups running FS with the exact same profile and dialplan, one running on windows and the other on a raspberry pi, both receive calls from registered clients and forward to a remote gateway, the problem is when client sends dtmf, the windows FS forwards to gateway without issues but on the rpi most of the times fs isnt able to detect dtmf or at times detects but doesnt or partially sends to gateway. i have been banging my head with this from a few days but no idea whats going wrong, the client sending to rpi FS i even made him send call to gateway directly and then that works so this rules out client issue, no idea whats wrong with FS, both are on the latest build
im using g711u throughout
-- Regards, Bipin
------------------------------
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com Book a phone call (CST) <https://freeswitch.com/appointment> Allison prompts for FreeSWITCH: *https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch> Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch> *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
Detect as in when fs receives a DTMF it prints in cli, when it doesn't it didn't detect a DTMF even though client is sending it. First I tried sending inband and used start DTMF but that wasn't too good so moved to the rfc one and then finally ended up using info. I made some progress on this, wanted to know can fs receive DTMF as rfc or info and send info or rfc to gateway, something like a intercept and forward as a new method? When I set DTMF to rfc in profile and client sends in info then nothing goes to gateway, if client sends info and I set info in profile then it works. In summary I want to accept info and rfc and want to send to gateway in whatever mode they support rather than force client to send in a particular format. Also is there a way to make DTMF timings a little relaxed, I have another client that uses fs as PBX and calls come to it using a pstn to VoIP gateway and due to the exchange under going hardware upgrades the DTMF timings are a little out or the trailing sound is a bit broken and most of the times the pstn gateway doesn't detect so I switched it to inband and if I can tune fs to accept a little messed up DTMF then it would make it work. I had a similar issue in a different country when the exchange was moving to etsi fsk for caller ID and it took months for the company to figure out the issue and sort it out On June 9, 2017 12:27:04 AM Brian West <brian@freeswitch.org> wrote:
Its a little unclear, you say 'detect', so I have to assume you're running a dtmf detector. You're running on x86 vs arm, so I can only assume its possibly that differences in architecture are at play here.
/b
On Thu, Jun 8, 2017 at 10:41 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
i have 2 setups running FS with the exact same profile and dialplan, one running on windows and the other on a raspberry pi, both receive calls from registered clients and forward to a remote gateway, the problem is when client sends dtmf, the windows FS forwards to gateway without issues but on the rpi most of the times fs isnt able to detect dtmf or at times detects but doesnt or partially sends to gateway. i have been banging my head with this from a few days but no idea whats going wrong, the client sending to rpi FS i even made him send call to gateway directly and then that works so this rules out client issue, no idea whats wrong with FS, both are on the latest build
im using g711u throughout
-- Regards, Bipin
------------------------------
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
*Brian West* brian@freeswitch.org
*Twitter: @FreeSWITCH , @briankwest*
http://www.freeswitchbook.com http://www.freeswitchcookbook.com
Book a phone call (CST) <https://freeswitch.com/appointment>
Allison prompts for FreeSWITCH:
*https://www.gofundme.com/allison-prompts-for-freeswitch* <https://www.gofundme.com/allison-prompts-for-freeswitch>
Got Bugs? Report them here <https://freeswitch.org/jira>! | Reddit: /r/freeswitch <https://www.reddit.com/r/freeswitch>
*T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *Skype:*briankwest
---------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why?
Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote:
Hi
call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys .
but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf ,
why?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote:
I have read the logs ,but I didn't find any difference.
Please make a test to see if this happens in your box.
At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote:
Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird
David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote:
Hi
call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys .
but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf ,
why?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs; when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird. At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote: you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote: I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible. -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote:
I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs;
when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird.
At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote:
you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated
On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote:
I have read the logs ,but I didn't find any difference.
Please make a test to see if this happens in your box.
At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote:
Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird
David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote:
Hi
call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys .
but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf ,
why?
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
Sincerely,
Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
It's a one leg call .there is no b-leg. please make a test on your freeswitch box . just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input. At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible. -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote: I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs; when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird. At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote: you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote: I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>> It's a one leg call .there is no b-leg.
please make a test on your freeswitch box . just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input. At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible. -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote: I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs; when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird. At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote: you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote: I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Never heard such problems Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote:
I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>> It's a one leg call .there is no b-leg.
please make a test on your freeswitch box .
just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input.
At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" < luis.daniel.lucio@gmail.com> wrote:
check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible.
-- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx
Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH
On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote:
I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs;
when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird.
At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote:
you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated
On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote:
I have read the logs ,but I didn't find any difference.
Please make a test to see if this happens in your box.
At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail. com> wrote:
Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird
David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote:
Hi
call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys .
but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf ,
why?
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ options/freeswitch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
Sincerely,
Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I don't mean to hijack the OP concern with my problem, I just wanted to reinforce I have seen this problem. And the problem is that the call originated through FS appears not to send user entered DTMF to the receiving phone. Let's help chenyzhi and then I'll take a turn. - James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/14/2017 03:53 AM >>>
Never heard such problems Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote: I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>>
It's a one leg call .there is no b-leg. please make a test on your freeswitch box . just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input. At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible. -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote: I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs; when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird. At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote: you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote: I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I do this on a daily basis, originate and send to an ivr to get dtmf digits, no issues ever found... On Wed, Jun 14, 2017 at 6:36 PM admin <admin@tedssupply.com> wrote:
I don't mean to hijack the OP concern with my problem, I just wanted to reinforce I have seen this problem. And the problem is that the call originated through FS appears not to send user entered DTMF to the receiving phone. Let's help chenyzhi and then I'll take a turn.
- James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/14/2017 03:53 AM >>>
Never heard such problems
Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT
On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote:
I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>>
It's a one leg call .there is no b-leg.
please make a test on your freeswitch box .
just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input.
At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" < luis.daniel.lucio@gmail.com> wrote:
check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible.
--
Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx
Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH
On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote:
I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs;
when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird.
At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote:
you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated
On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote:
I have read the logs ,but I didn't find any difference.
Please make a test to see if this happens in your box.
At 2017-06-10 06:49:34, "David Villasmil" < david.villasmil.work@gmail.com> wrote:
Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird
David
On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote:
Hi
call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys .
but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf ,
why?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
Sincerely,
Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On 14 June 2017 at 18:36, admin <admin@tedssupply.com> wrote:
I don't mean to hijack the OP concern with my problem, I just wanted to reinforce I have seen this problem. And the problem is that the call originated through FS appears not to send user entered DTMF to the receiving phone. Let's help chenyzhi and then I'll take a turn.
I just tested right now from console with: bgapi originate user/1011 5000 and originate user/1011 5000 and it works Please pastebin your FreeSWITCH version (eg, type "version" in console), your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs Maybe helping you we'll help him too
- James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/14/2017 03:53 AM >>>
Never heard such problems
Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT
On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote:
I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>>
It's a one leg call .there is no b-leg.
please make a test on your freeswitch box .
just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input.
At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" < luis.daniel.lucio@gmail.com> wrote:
check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible.
--
Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx
Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH
On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote:
I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs;
when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird.
At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote:
you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated
On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote:
I have read the logs ,but I didn't find any difference.
Please make a test to see if this happens in your box.
At 2017-06-10 06:49:34, "David Villasmil" < david.villasmil.work@gmail.com> wrote:
Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird
David
On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote:
Hi
call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys .
but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf ,
why?
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
--
Sincerely,
Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
the version is: FreeSWITCH Version 1.9.0+git~20170518T231917Z~a1fc18aee5~32bit (git a1fc18a 2017-05-18 23:19:17Z 32bit) the complete, since beginning to end, unedited, debug output of console when making a outgoing call which does not get DTMFs and the whole conf folder is in the attatchment. thx! 在 2017-06-15 00:42:11，"Giovanni Maruzzelli" <gmaruzz@gmail.com> 写道： On 14 June 2017 at 18:36, admin <admin@tedssupply.com> wrote: I don't mean to hijack the OP concern with my problem, I just wanted to reinforce I have seen this problem. And the problem is that the call originated through FS appears not to send user entered DTMF to the receiving phone. Let's help chenyzhi and then I'll take a turn. I just tested right now from console with: bgapi originate user/1011 5000 and originate user/1011 5000 and it works Please pastebin your FreeSWITCH version (eg, type "version" in console), your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs Maybe helping you we'll help him too - James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/14/2017 03:53 AM >>>
Never heard such problems Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote: I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>>
It's a one leg call .there is no b-leg. please make a test on your freeswitch box . just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input. At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible. -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote: I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs; when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird. At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote: you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote: I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
On 15 June 2017 at 04:28, chenyzhi <eastour@163.com> wrote:
the version is: FreeSWITCH Version 1.9.0+git~20170518T231917Z~a1fc18aee5~32bit (git a1fc18a 2017-05-18 23:19:17Z 32bit)
the complete, since beginning to end, unedited, debug output of console when making a outgoing call which does not get DTMFs
and the whole conf folder is in the attatchment.
from the log, seems it does not read all the IVR messages correctly to you, it exits straight away... are you able to correctly hear all the IVR messages? also, can you take a SIP trace? (from console: "sofia global siptrace on") I suspect you have a NAT problem of some sort Also, I see you are on MASTER git, on Windows, and on 32 bit... Not sure this is supported... Have you has this problems with stable branch (1.6.x)?
thx!
在 2017-06-15 00:42:11，"Giovanni Maruzzelli" <gmaruzz@gmail.com> 写道：
On 14 June 2017 at 18:36, admin <admin@tedssupply.com> wrote:
I don't mean to hijack the OP concern with my problem, I just wanted to reinforce I have seen this problem. And the problem is that the call originated through FS appears not to send user entered DTMF to the receiving phone. Let's help chenyzhi and then I'll take a turn.
I just tested right now from console with:
bgapi originate user/1011 5000
and
originate user/1011 5000
and it works
Please pastebin your FreeSWITCH version (eg, type "version" in console), your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs
Maybe helping you we'll help him too
- James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/14/2017 03:53 AM >>>
Never heard such problems
Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT
On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote:
I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>>
It's a one leg call .there is no b-leg.
please make a test on your freeswitch box .
just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input.
At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" < luis.daniel.lucio@gmail.com> wrote:
check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible.
--
Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx
Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH
On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote:
I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs;
when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird.
At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote:
you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated
On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote:
I have read the logs ,but I didn't find any difference.
Please make a test to see if this happens in your box.
At 2017-06-10 06:49:34, "David Villasmil" < david.villasmil.work@gmail.com> wrote:
Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird
David
On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote:
Hi
call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys .
but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf ,
why?
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users http://www.freeswitch.org
--
Sincerely,
Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
--
Sincerely,
Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
Yes ,I can hear all the IVR prompt voices correctly. I don't think it's a NAT problem ,because both the x-lite and the freeswitch are in the same LAN. The sip trace log is in the attatchment. Thank you. PS I tested this on another freeswitch box ,version: FreeSWITCH Version 1.6.16+git~20170403T142423Z~e6d643b29c~32bit (git e6d643b 2017-04-03 14:24:23Z 32bit) It can detect dtmf on outgoing calls. Maybe this only happens on FreeSWITCH Version 1.9.0+git~20170518T231917Z~a1fc18aee5~32bit (git a1fc18a 2017-05-18 23:19:17Z 32bit) 在 2017-06-15 17:04:48，"Giovanni Maruzzelli" <gmaruzz@gmail.com> 写道： On 15 June 2017 at 04:28, chenyzhi <eastour@163.com> wrote: the version is: FreeSWITCH Version 1.9.0+git~20170518T231917Z~a1fc18aee5~32bit (git a1fc18a 2017-05-18 23:19:17Z 32bit) the complete, since beginning to end, unedited, debug output of console when making a outgoing call which does not get DTMFs and the whole conf folder is in the attatchment. from the log, seems it does not read all the IVR messages correctly to you, it exits straight away... are you able to correctly hear all the IVR messages? also, can you take a SIP trace? (from console: "sofia global siptrace on") I suspect you have a NAT problem of some sort Also, I see you are on MASTER git, on Windows, and on 32 bit... Not sure this is supported... Have you has this problems with stable branch (1.6.x)? thx! 在 2017-06-15 00:42:11，"Giovanni Maruzzelli" <gmaruzz@gmail.com> 写道： On 14 June 2017 at 18:36, admin <admin@tedssupply.com> wrote: I don't mean to hijack the OP concern with my problem, I just wanted to reinforce I have seen this problem. And the problem is that the call originated through FS appears not to send user entered DTMF to the receiving phone. Let's help chenyzhi and then I'll take a turn. I just tested right now from console with: bgapi originate user/1011 5000 and originate user/1011 5000 and it works Please pastebin your FreeSWITCH version (eg, type "version" in console), your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs Maybe helping you we'll help him too - James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/14/2017 03:53 AM >>>
Never heard such problems Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote: I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>>
It's a one leg call .there is no b-leg. please make a test on your freeswitch box . just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input. At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible. -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote: I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs; when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird. At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote: you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote: I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
On 16 June 2017 at 06:02, chenyzhi <eastour@163.com> wrote:
Yes ,I can hear all the IVR prompt voices correctly.
I don't think it's a NAT problem ,because both the x-lite and the freeswitch are in the same LAN.
The sip trace log is in the attatchment. Thank you.
PS I tested this on another freeswitch box ,version: FreeSWITCH Version 1.6.16+git~20170403T142423Z~e6d643b29c~32bit (git e6d643b 2017-04-03 14:24:23Z 32bit) It can detect dtmf on outgoing calls. Maybe this only happens on FreeSWITCH Version 1.9.0+git~20170518T231917Z~a1fc18aee5~32bit (git a1fc18a 2017-05-18 23:19:17Z 32bit)
then use the stable version, and open a jira for this issue citing the master version you are using
its worth testing both most recent master and 1.6.18.
On Jun 17, 2017, at 4:32 AM, Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
On 16 June 2017 at 06:02, chenyzhi <eastour@163.com <mailto:eastour@163.com>> wrote: Yes ,I can hear all the IVR prompt voices correctly.
I don't think it's a NAT problem ,because both the x-lite and the freeswitch are in the same LAN.
The sip trace log is in the attatchment. Thank you.
PS I tested this on another freeswitch box ,version: FreeSWITCH Version 1.6.16+git~20170403T142423Z~e6d643b29c~32bit (git e6d643b 2017-04-03 14:24:23Z 32bit) It can detect dtmf on outgoing calls. Maybe this only happens on FreeSWITCH Version 1.9.0+git~20170518T231917Z~a1fc18aee5~32bit (git a1fc18a 2017-05-18 23:19:17Z 32bit)
then use the stable version, and open a jira for this issue citing the master version you are using
I am finally onsite and have prepared the logs requested, but I am having a bit of trouble with Pastebin. Is there a max line count? I logged a good call, bad call, good sip trace, bad sip trace and including dialplan is about 17,000 lines -- too many? May just be a temp problem with server, will try again later. Thanks - James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/15/2017 05:04 AM >>>
On 15 June 2017 at 04:28, chenyzhi <eastour@163.com> wrote: the version is: FreeSWITCH Version 1.9.0+git~20170518T231917Z~a1fc18aee5~32bit (git a1fc18a 2017-05-18 23:19:17Z 32bit) the complete, since beginning to end, unedited, debug output of console when making a outgoing call which does not get DTMFs and the whole conf folder is in the attatchment. from the log, seems it does not read all the IVR messages correctly to you, it exits straight away... are you able to correctly hear all the IVR messages? also, can you take a SIP trace? (from console: "sofia global siptrace on") I suspect you have a NAT problem of some sort Also, I see you are on MASTER git, on Windows, and on 32 bit... Not sure this is supported... Have you has this problems with stable branch (1.6.x)? thx! 在 2017-06-15 00:42:11，"Giovanni Maruzzelli" <gmaruzz@gmail.com> 写道： On 14 June 2017 at 18:36, admin <admin@tedssupply.com> wrote: I don't mean to hijack the OP concern with my problem, I just wanted to reinforce I have seen this problem. And the problem is that the call originated through FS appears not to send user entered DTMF to the receiving phone. Let's help chenyzhi and then I'll take a turn. I just tested right now from console with: bgapi originate user/1011 5000 and originate user/1011 5000 and it works Please pastebin your FreeSWITCH version (eg, type "version" in console), your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs Maybe helping you we'll help him too - James
Giovanni Maruzzelli <gmaruzz@gmail.com> 6/14/2017 03:53 AM >>>
Never heard such problems Please pastebin your dialplan, your SIP profile, and the complete, since beginning to end, unedited, debug output of console when receiving a call which does not get DTMFs sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT On Jun 13, 2017 23:07, "admin" <admin@tedssupply.com> wrote: I am encountering the same issue. I am using an ESL call to api originate, with little else except getting in and out of the port, and the caller DTMF is failing to reach the called number. The called number auto answer attendant does not respond to DTMF, and a call to a test phone confirms no DTMF. This is a new upgrade from 1.2 to 1.6 and I don't know if this was an issue in 1.2, but my users never complained before 1.6 upgrade. Ideas?...
chenyzhi <eastour@163.com> 06/13/17 3:32 PM >>>
It's a one leg call .there is no b-leg. please make a test on your freeswitch box . just type the command "originate user/1001 5000" on the freeswitch console to see if your freeswitch instance can detect dtmf input. At 2017-06-12 22:57:17, "Luis Daniel Lucio Quiroz" <luis.daniel.lucio@gmail.com> wrote: check if you have transcoding, and if you do, check that dftm type-codec on leg b are compatible. -- Luis Daniel Lucio Quiroz CISSP, CISM, CISA Linux, VoIP and much more fun www.okay.com.mx Need LCR? Check out LCR for FusionPBX with FreeSWITCH Need Billing? Check out Billing for FusionPBX with FreeSWITCH On Mon, Jun 12, 2017 at 9:16 AM, chenyzhi <eastour@163.com> wrote: I don't think It's the DTMF type , because when I dial 5000 from x-lite (which has registered to freeswitch as 1001) ,I can hear the voice and if I press any dtmf on x-lite, freeswitch can recieve the dtmfs. This means that the DTMF type is correct ,otherwise freeswitch coudn't have received the dtmfs; when I enter the command "originate user/1001 5000" at the freeswitch console , my xlite will ring ,and I answered ,I can hear the voice ,I press some dtmf,but freeswitch can NOT receive any dtmf. really weird. At 2017-06-12 17:37:49, "Giovanni Maruzzelli" <gmaruzz@gmail.com> wrote: you need to check the DTMF type, you probably are using the wrong one (info-inband-rfc2833), and for some reason they are not negotiated On 12 June 2017 at 02:32, chenyzhi <eastour@163.com> wrote: I have read the logs ,but I didn't find any difference. Please make a test to see if this happens in your box. At 2017-06-10 06:49:34, "David Villasmil" <david.villasmil.work@gmail.com> wrote: Have you looked at the log? Bump the logging up and see what shows up... what you're seeing is very weird David On Fri, Jun 9, 2017 at 11:18 AM chenyzhi <eastour@163.com> wrote: Hi call 5000 from x-lite , you can hear the IVR voice and if you press dtmf keys , freeswitch can receive the dtmf keys . but , if you enter the command "originate user/1001 5000" , x-lite will ring ,answer it ,you can hear the IVR voice , press some keys ,the freeswitch can NOT receive any dtmf , why? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- Sincerely, Giovanni Maruzzelli OpenTelecom.IT cell: +39 347 266 56 18
participants (8)
-
admin
-
Bipin Patel
-
Brian West
-
chenyzhi
-
David Villasmil
-
Giovanni Maruzzelli
-
Luis Daniel Lucio Quiroz
-
Michael Jerris