Detect as in when fs receives a DTMF it prints in cli, when it doesn't it didn't detect a DTMF even though client is sending it. First I tried sending inband and used start DTMF but that wasn't too good so moved to the rfc one and then finally ended up using info. I made some progress on this, wanted to know can fs receive DTMF as rfc or info and send info or rfc to gateway, something like a intercept and forward as a new method? When I set DTMF to rfc in profile and client sends in info then nothing goes to gateway, if client sends info and I set info in profile then it works. In summary I want to accept info and rfc and want to send to gateway in whatever mode they support rather than force client to send in a particular format.
Also is there a way to make DTMF timings a little relaxed, I have another client that uses fs as PBX and calls come to it using a pstn to VoIP gateway and due to the exchange under going hardware upgrades the DTMF timings are a little out or the trailing sound is a bit broken and most of the times the pstn gateway doesn't detect so I switched it to inband and if I can tune fs to accept a little messed up DTMF then it would make it work.
I had a similar issue in a different country when the exchange was moving to etsi fsk for caller ID and it took months for the company to figure out the issue and sort it out
On June 9, 2017 12:27:04 AM Brian West <brian@freeswitch.org> wrote:
Its a little unclear, you say 'detect', so I have to assume you're running a dtmf detector. You're running on x86 vs arm, so I can only assume its possibly that differences in architecture are at play here./b_________________________________________________________________________On Thu, Jun 8, 2017 at 10:41 AM, Bipin Patel <bipin@xbipin.com> wrote:hi,
i have 2 setups running FS with the exact same profile and dialplan, one running on windows and the other on a raspberry pi, both receive calls from registered clients and forward to a remote gateway, the problem is when client sends dtmf, the windows FS forwards to gateway without issues but on the rpi most of the times fs isnt able to detect dtmf or at times detects but doesnt or partially sends to gateway.
i have been banging my head with this from a few days but no idea whats going wrong, the client sending to rpi FS i even made him send call to gateway directly and then that works so this rules out client issue, no idea whats wrong with FS, both are on the latest build
im using g711u throughout
--
Regards,
Bipin
____________________________________________________________ _____________
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch- users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/ options/freeswitch-users
http://www.freeswitch.org--Brian West
brian@freeswitch.orgTwitter: @FreeSWITCH , @briankwest
http://www.freeswitchbook.com
http://www.freeswitchcookbook.comBook a phone call (CST)
Allison prompts for FreeSWITCH:
Got Bugs? Report them here! | Reddit: /r/freeswitch
T:+19184209001 | F:+19184209002 | M:+1918424WEST (9378)
Skype:briankwest
Professional FreeSWITCH Consulting Services:
consulting@freeswitch.org
http://www.freeswitchsolutions.com
Official FreeSWITCH Sites
http://www.freeswitch.org
http://confluence.freeswitch.org
http://www.cluecon.com
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org