Hi I ust Raspbian from raspberry site http://www.raspberrypi.org/downloads Linux raspberrypi 3.6.11+ #538 PREEMPT Fri Aug 30 20:42:08 BST 2013 armv6l GNU/Linux

From: Steve Underwood <steveu@coppice.org> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Cc: Date: Mon, 04 Nov 2013 09:16:29 +0800 Subject: Re: [Freeswitch-users] Raspberry Pi, mod_gsmopen GSM dongle On 10/29/2013 03:05 PM, Sergey Zhuravlov wrote:

...

Hi!

Does somebody have a positive experience with Raspberry Pi, mod_gsmopen GSM dongle ??? I use Raspberry PiB and e1550.

It's a shame that with an asterisk all works fine -- RasPBX. http://www. raspberry-asterisk.org/

But I prefer the FreeSWITCH ;-) On the basis of experience, I thought that PS will work best for this modest hardware faster and require fewer resources.

But it turns out it is not. Asterisk with a web server, MySQL database, and other, less load than FS. In this connection, other parameters may be used starting FS to save resources?

And the main question! Silence an incoming call on 5000 (IVR) as well as an outgoing in gsm network. Those are not sound.

This may have nothing to do with FreeSwitch. Is the same Linux distro being used for Asterisk and FreeSwitch? It makes a huge difference on a Raspberry Pi. The obvious performance difference is that some distros use software floating point, and some use hardware floating point. Its more that, though. When I tried various distributions I found compile times vary by a factor of 5 or more.

Regards, Steve

---------- Пересылаемое сообщение ---------- From: Ali Pey <alipey@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Cc: Date: Sun, 3 Nov 2013 20:36:04 -0500 Subject: [Freeswitch-users] bind_digit_action does not work when the call is sent to a script through socket (ESL) Hello,

bind_digit_action does not work when the call is sent to a script through socket. I have tried setting it before or inside the ESL perl script. It works before the call is sent to ESL, but it stops working after.

Would this be a bug?

Any guidance or help would be greatly appreciated. We have been trying to get it to work for days with no success.

Thanks, Ali Pey

---------- Пересылаемое сообщение ---------- From: Brandon Lee <devmgr1@yahoo.com> To: "freeswitch-users@lists.freeswitch.org" < freeswitch-users@lists.freeswitch.org> Cc: Date: Sun, 3 Nov 2013 16:40:47 -0800 (PST) Subject: [Freeswitch-users] Inbound Call to Registered Users Hello,

We have 2 FreeSWITCH servers that share the same db at different locations and when a user registers at one location, the other location is unable to dial the registered user. The hangup clause is USER_NOT_REGISTERED. Also in the logs I see Cannot locate registered user 9897sx3243@74.23.24.23.

It seems that the registered user lookup filters by freeswitch server ip as the domain is the same on both servers. I noticed if I register at both locations, and send the call to the server I am not registered to, it works just fine. Would anyone know how I can enable freeswitch to perform the lookup even if the user is registered at another location?

______________________________ _________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- WBR, Sergey

GTALK/JABBER:4orbit@gmail.com -- WBR, Sergey GTALK/JABBER:4orbit@gmail.com