Caller ID using Fifo
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
João Leme, The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature. Regards, João Mesquita On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
What about showing the Caller ID after it is answered? Any way to do that? 2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com>wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Just to follow up on this subject. I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation. If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it. Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading "Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com>wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com>wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi All I have since had a play with mod_callcenter and have not been able to send the call to an agent with the caller_id_name as the name of the queue. I keep on getting the CLI on both. As this cannot be done in FIFO either, do any of you have any ideas? or managed to get it working ? thanks Marc On Fri, Jan 14, 2011 at 4:35 PM, Marc de Corny <marcdecorny@gmail.com>wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com>wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com>wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I haven't been able to find a solution either (havent' had much time), but have you already tried the following to make sure it does not work? "Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller)." I haven't had time to look into but that's where I would start. It was added to the Fifo wiki by User "Sward" (no futher info on user) on: (cur<http://wiki.freeswitch.org/index.php?title=Mod_fifo&diff=24330&oldid=20224>) (prev<http://wiki.freeswitch.org/index.php?title=Mod_fifo&diff=20224&oldid=20175>) 15:21, 9 June 2010<http://wiki.freeswitch.org/index.php?title=Mod_fifo&oldid=20224> Sward<http://wiki.freeswitch.org/index.php?title=User:Sward&action=edit&redlink=1> (Talk<http://wiki.freeswitch.org/index.php?title=User_talk:Sward&action=edit&redlink=1>| contribs <http://wiki.freeswitch.org/wiki/Special:Contributions/Sward>) (26,518 bytes) (→<http://wiki.freeswitch.org/wiki/Mod_fifo#Configure_for_Agent_Callback>Configure for Agent Callback) If anyone know this "Sward" guy, he may have some answers. Thanks, John On Mon, Jan 24, 2011 at 1:20 AM, Marc de Corny <marcdecorny@gmail.com>wrote:
Hi All
I have since had a play with mod_callcenter and have not been able to send the call to an agent with the caller_id_name as the name of the queue.
I keep on getting the CLI on both.
As this cannot be done in FIFO either, do any of you have any ideas? or managed to get it working ?
thanks Marc
On Fri, Jan 14, 2011 at 4:35 PM, Marc de Corny <marcdecorny@gmail.com>wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com>wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com>wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
there is a param in fifo "outbound_name" if its set, it will put it in parens along with the caller's caller_id_name (sales) Fred Smith 2121231234 On Mon, Jan 24, 2011 at 4:55 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
I haven't been able to find a solution either (havent' had much time), but have you already tried the following to make sure it does not work? "Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller)." I haven't had time to look into but that's where I would start. It was added to the Fifo wiki by User "Sward" (no futher info on user) on: (cur) (prev) 15:21, 9 June 2010 Sward (Talk | contribs) (26,518 bytes) (→Configure for Agent Callback) If anyone know this "Sward" guy, he may have some answers. Thanks, John
On Mon, Jan 24, 2011 at 1:20 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
Hi All
I have since had a play with mod_callcenter and have not been able to send the call to an agent with the caller_id_name as the name of the queue.
I keep on getting the CLI on both.
As this cannot be done in FIFO either, do any of you have any ideas? or managed to get it working ?
thanks Marc
On Fri, Jan 14, 2011 at 4:35 PM, Marc de Corny <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme, The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature. Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Hi Fred, I just tried: <action application="set" data="outbound_name=${caller_id_number}"/> before <action application="fifo" data="sales_fifo@$${domain} in undef $${base_dir}/sounds/music/8000/partita-no-3-in-e-major-bwv-1006-1-preludio.wav"/> and it didn't work. Did I do anything wrong? Thanks, John On Mon, Jan 24, 2011 at 3:38 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
there is a param in fifo "outbound_name" if its set, it will put it in parens along with the caller's caller_id_name
(sales) Fred Smith 2121231234
On Mon, Jan 24, 2011 at 4:55 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
I haven't been able to find a solution either (havent' had much time), but have you already tried the following to make sure it does not work? "Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller)." I haven't had time to look into but that's where I would start. It was added to the Fifo wiki by User "Sward" (no futher info on user) on: (cur) (prev) 15:21, 9 June 2010 Sward (Talk | contribs) (26,518 bytes) (→Configure for Agent Callback) If anyone know this "Sward" guy, he may have some answers. Thanks, John
On Mon, Jan 24, 2011 at 1:20 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
Hi All
I have since had a play with mod_callcenter and have not been able to
send
the call to an agent with the caller_id_name as the name of the queue.
I keep on getting the CLI on both.
As this cannot be done in FIFO either, do any of you have any ideas? or managed to get it working ?
thanks Marc
On Fri, Jan 14, 2011 at 4:35 PM, Marc de Corny <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the
caller_id_name
changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme, The caller id is not passed when the phone is ringing because
mod_fifo
does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature. Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com
wrote: > > Hi there, > I would like to know if there is a way to see the caller ID on my Sip > Client (X-Lite for example) of the caller that I answear from a Fifo queue? > Thanks, > John > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Try export instead of set. Am 25.01.2011 um 01:58 schrieb Joao Leme:
Hi Fred,
I just tried:
<action application="set" data="outbound_name=${caller_id_number}"/>
before
<action application="fifo" data="sales_fifo@$${domain} in undef $${base_dir}/sounds/music/8000/partita-no-3-in-e-major-bwv-1006-1-preludio.wav"/>
and it didn't work.
Did I do anything wrong?
Thanks, John
On Mon, Jan 24, 2011 at 3:38 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote: there is a param in fifo "outbound_name" if its set, it will put it in parens along with the caller's caller_id_name
(sales) Fred Smith 2121231234
On Mon, Jan 24, 2011 at 4:55 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
I haven't been able to find a solution either (havent' had much time), but have you already tried the following to make sure it does not work? "Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller)." I haven't had time to look into but that's where I would start. It was added to the Fifo wiki by User "Sward" (no futher info on user) on: (cur) (prev) 15:21, 9 June 2010 Sward (Talk | contribs) (26,518 bytes) (→Configure for Agent Callback) If anyone know this "Sward" guy, he may have some answers. Thanks, John
On Mon, Jan 24, 2011 at 1:20 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
Hi All
I have since had a play with mod_callcenter and have not been able to send the call to an agent with the caller_id_name as the name of the queue.
I keep on getting the CLI on both.
As this cannot be done in FIFO either, do any of you have any ideas? or managed to get it working ?
thanks Marc
On Fri, Jan 14, 2011 at 4:35 PM, Marc de Corny <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme, The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature. Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com> wrote: > > Hi there, > I would like to know if there is a way to see the caller ID on my Sip > Client (X-Lite for example) of the caller that I answear from a Fifo queue? > Thanks, > John > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Michal Bielicki Geschäftsführer / CEO Seventh Signal Ltd. & Co. KG Weigandufer 45, Büro 115, D-12059 Berlin Voice: +49 30 60988730 Amtsgericht Charlottenburg HRA 44413 B Ust.-ID: DE266981999 Geschäftsführer: Michal Bielicki Persönlich Haftende Gesellschafterin: Seventh Signal Ltd, 69 Great Hampton St. Birmingham, B18 6EW, GB, Company Nr.: 06889439 WWW.: http://www.seventhsignal.de
Thanks but no luck. I keeps showing "Queue <fifo+sales_fifo@192.168.1.58<fifo%2Bsales_fifo@192.168.1.58>>" where "sales_fifo@$${domain}" is the fifo name on fifo.conf.xml. On Mon, Jan 24, 2011 at 5:12 PM, Michal Bielicki < michal.bielicki@seventhsignal.de> wrote:
Try export instead of set.
Am 25.01.2011 um 01:58 schrieb Joao Leme:
Hi Fred,
I just tried:
<action application="set" data="outbound_name=${caller_id_number}"/>
before
<action application="fifo" data="sales_fifo@$${domain} in undef $${base_dir}/sounds/music/8000/partita-no-3-in-e-major-bwv-1006-1-preludio.wav"/>
and it didn't work.
Did I do anything wrong?
Thanks, John
On Mon, Jan 24, 2011 at 3:38 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
there is a param in fifo "outbound_name" if its set, it will put it in parens along with the caller's caller_id_name
(sales) Fred Smith 2121231234
On Mon, Jan 24, 2011 at 4:55 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
I haven't been able to find a solution either (havent' had much time), but have you already tried the following to make sure it does not work? "Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller)." I haven't had time to look into but that's where I would start. It was added to the Fifo wiki by User "Sward" (no futher info on user) on: (cur) (prev) 15:21, 9 June 2010 Sward (Talk | contribs) (26,518 bytes) (→Configure for Agent Callback) If anyone know this "Sward" guy, he may have some answers. Thanks, John
On Mon, Jan 24, 2011 at 1:20 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
Hi All
I have since had a play with mod_callcenter and have not been able to
send
the call to an agent with the caller_id_name as the name of the queue.
I keep on getting the CLI on both.
As this cannot be done in FIFO either, do any of you have any ideas? or managed to get it working ?
thanks Marc
On Fri, Jan 14, 2011 at 4:35 PM, Marc de Corny <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the
caller_id_name
changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com
wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org> > > João Leme, > The caller id is not passed when the phone is ringing because
mod_fifo
> does not know which call is going to be sent to that channel once it is > answered until it is really answered. I don't know if mod_callcenter does > show anything but you should consider looking at the documentation if you > really need this feature. > Regards, > João Mesquita > > > On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme < joaocarlosleme@gmail.com> > wrote: >> >> Hi there, >> I would like to know if there is a way to see the caller ID on my Sip >> Client (X-Lite for example) of the caller that I answear from a Fifo queue? >> Thanks, >> John >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
*Michal Bielicki* Geschäftsführer / CEO
*Seventh Signal Ltd. & Co. KG* Weigandufer 45, Büro 115, D-12059 Berlin Voice: +49 30 60988730
Amtsgericht Charlottenburg HRA 44413 B Ust.-ID: DE266981999 Geschäftsführer: Michal Bielicki Persönlich Haftende Gesellschafterin: Seventh Signal Ltd, 69 Great Hampton St. Birmingham, B18 6EW, GB, Company Nr.: 06889439 WWW.: http://www.seventhsignal.de
You should all confer to make sure you are all using fs latest git because that is the version I am talking about. Fifo has some major new features in latest that do not exist in older versions including showing the customers cid when it calls agents. The dilemma jm describes used to be true but is no longer the case with the default ringall strategy on latest git. The customers cid is sent to the agent and if the fifo xml defines outbound_name param that will be included as well. If you want to override it you must do what you quoted in the wiki in the dialstring contained in the member tag of the xml for that membership not in the dialplan. On Jan 14, 2011 10:36 AM, "Marc de Corny" <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name
changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent
answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it
sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough
expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls
an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). "
thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do
that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo
does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com>
wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip
Client (X-Lite for example) of the caller that I answear from a Fifo queue?
Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
mod_fifo can't transfer sip header message which defined by myself(sip_h_X-xxx) to b-leg also. Is there any solution in latest version? liuyp2 2011-01-25 发件人： Anthony Minessale 发送时间： 2011-01-25 09:28:25 收件人： FreeSWITCH Users Help 抄送： 主题： Re: [Freeswitch-users] Caller ID using Fifo You should all confer to make sure you are all using fs latest git because that is the version I am talking about. Fifo has some major new features in latest that do not exist in older versions including showing the customers cid when it calls agents. The dilemma jm describes used to be true but is no longer the case with the default ringall strategy on latest git. The customers cid is sent to the agent and if the fifo xml defines outbound_name param that will be included as well. If you want to override it you must do what you quoted in the wiki in the dialstring contained in the member tag of the xml for that membership not in the dialplan. On Jan 14, 2011 10:36 AM, "Marc de Corny" <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I can see that a number of us are interested in this. I have tried to set that outbound_name and fifo_outbound_name before send ing the call the queue but they made no difference. and when I do fifo list, I cannot see any variables with that name available to set. Am I not looking in the right place. I'm looking into <action application="set" data="fifo_orbit_dialplan=XML"/> as a potential way out, whereby as the call enters the FIFO I could record the outbound_name requested and then if I can control the call on the way out I can set it again. How does this command above allow me to send the calls out a certain way and treat them. what are the options for that fifo_orbit_dialplan thanks Marc On Tue, Jan 25, 2011 at 2:40 AM, liuyp2 <liuyp2@asiainfo-linkage.com> wrote:
mod_fifo can't transfer sip header message which defined by myself(sip_h_X-xxx) to b-leg also.
Is there any solution in latest version?
------------------------------ liuyp2 2011-01-25 ------------------------------
*发件人：* Anthony Minessale *发送时间：* 2011-01-25 09:28:25 *收件人：* FreeSWITCH Users Help *抄送：* *主题：* Re: [Freeswitch-users] Caller ID using Fifo
You should all confer to make sure you are all using fs latest git because that is the version I am talking about. Fifo has some major new features in latest that do not exist in older versions including showing the customers cid when it calls agents. The dilemma jm describes used to be true but is no longer the case with the default ringall strategy on latest git.
The customers cid is sent to the agent and if the fifo xml defines outbound_name param that will be included as well.
If you want to override it you must do what you quoted in the wiki in the dialstring contained in the member tag of the xml for that membership not in the dialplan.
On Jan 14, 2011 10:36 AM, "Marc de Corny" <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name
changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent
answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it
sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have
enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls
an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). "
thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do
that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo
does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com>
wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip
Client (X-Lite for example) of the caller that I answear from a Fifo queue?
Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
If they made no difference you are not on latest GIT HEAD On Wed, Jan 26, 2011 at 11:38 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
I can see that a number of us are interested in this. I have tried to set that outbound_name and fifo_outbound_name before send ing the call the queue but they made no difference.
and when I do fifo list, I cannot see any variables with that name available to set. Am I not looking in the right place.
I'm looking into <action application="set" data="fifo_orbit_dialplan=XML"/> as a potential way out, whereby as the call enters the FIFO I could record the outbound_name requested and then if I can control the call on the way out I can set it again. How does this command above allow me to send the calls out a certain way and treat them. what are the options for that fifo_orbit_dialplan
thanks Marc On Tue, Jan 25, 2011 at 2:40 AM, liuyp2 <liuyp2@asiainfo-linkage.com> wrote:
mod_fifo can't transfer sip header message which defined by myself(sip_h_X-xxx) to b-leg also.
Is there any solution in latest version?
________________________________ liuyp2 2011-01-25 ________________________________
发件人： Anthony Minessale 发送时间： 2011-01-25 09:28:25 收件人： FreeSWITCH Users Help 抄送： 主题： Re: [Freeswitch-users] Caller ID using Fifo
You should all confer to make sure you are all using fs latest git because that is the version I am talking about. Fifo has some major new features in latest that do not exist in older versions including showing the customers cid when it calls agents. The dilemma jm describes used to be true but is no longer the case with the default ringall strategy on latest git.
The customers cid is sent to the agent and if the fifo xml defines outbound_name param that will be included as well.
If you want to override it you must do what you quoted in the wiki in the dialstring contained in the member tag of the xml for that membership not in the dialplan.
On Jan 14, 2011 10:36 AM, "Marc de Corny" <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because mod_fifo does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
Hi there, I would like to know if there is a way to see the caller ID on my Sip Client (X-Lite for example) of the caller that I answear from a Fifo queue? Thanks, John
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Hi Anthony, I updated it the other day. This is my version : freeswitch@internal> version FreeSWITCH Version 1.0.head (git-6faa4c9 2010-12-02 17-11-04 -0600) Having said that I am using remote SIP endpoints on another SIP platform, maybe that is why. I will take a closer look at the signalling and see. thanks Marc On Thu, Jan 27, 2011 at 1:50 AM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
If they made no difference you are not on latest GIT HEAD
On Wed, Jan 26, 2011 at 11:38 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
I can see that a number of us are interested in this. I have tried to set that outbound_name and fifo_outbound_name before send ing the call the queue but they made no difference.
and when I do fifo list, I cannot see any variables with that name available to set. Am I not looking in the right place.
I'm looking into <action application="set" data="fifo_orbit_dialplan=XML"/> as a potential way out, whereby as the call enters the FIFO I could record the outbound_name requested and then if I can control the call on the way out I can set it again. How does this command above allow me to send the calls out a certain way and treat them. what are the options for that fifo_orbit_dialplan
thanks Marc On Tue, Jan 25, 2011 at 2:40 AM, liuyp2 <liuyp2@asiainfo-linkage.com> wrote:
mod_fifo can't transfer sip header message which defined by myself(sip_h_X-xxx) to b-leg also.
Is there any solution in latest version?
________________________________ liuyp2 2011-01-25 ________________________________
发件人： Anthony Minessale 发送时间： 2011-01-25 09:28:25 收件人： FreeSWITCH Users Help 抄送： 主题： Re: [Freeswitch-users] Caller ID using Fifo
You should all confer to make sure you are all using fs latest git
because
that is the version I am talking about. Fifo has some major new features in latest that do not exist in older versions including showing the customers cid when it calls agents. The dilemma jm describes used to be true but is no longer the case with the default ringall strategy on latest git.
The customers cid is sent to the agent and if the fifo xml defines outbound_name param that will be included as well.
If you want to override it you must do what you quoted in the wiki in the dialstring contained in the member tag of the xml for that membership not in the dialplan.
On Jan 14, 2011 10:36 AM, "Marc de Corny" <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be
honest I
cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com
wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
João Leme,
The caller id is not passed when the phone is ringing because
mod_fifo
does not know which call is going to be sent to that channel once it is answered until it is really answered. I don't know if mod_callcenter does show anything but you should consider looking at the documentation if you really need this feature.
Regards, João Mesquita
On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme < joaocarlosleme@gmail.com> wrote: > > Hi there, > I would like to know if there is a way to see the caller ID on my Sip > Client (X-Lite for example) of the caller that I answear from a Fifo queue? > Thanks, > John > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
not the dialplan, the fifo config file: autoload_configs/fifo.conf.xml configuration name="fifo.conf" description="FIFO Configuration"> <settings> <param name="delete-all-outbound-member-on-startup" value="false"/> </settings> <fifos> <fifo name="test_fifo@$${domain}" importance="0" outbound_name="sales"> <member timeout="60" simo="1" lag="20">{origination_caller_id_name=fred,origination_caller_id_number=1234}user/1005@$${domain}</member> </fifo> </fifos> </configuration> On Thu, Jan 27, 2011 at 12:55 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
Hi Anthony,
I updated it the other day.
This is my version : freeswitch@internal> version FreeSWITCH Version 1.0.head (git-6faa4c9 2010-12-02 17-11-04 -0600)
Having said that I am using remote SIP endpoints on another SIP platform, maybe that is why. I will take a closer look at the signalling and see.
thanks Marc
On Thu, Jan 27, 2011 at 1:50 AM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
If they made no difference you are not on latest GIT HEAD
On Wed, Jan 26, 2011 at 11:38 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
I can see that a number of us are interested in this. I have tried to set that outbound_name and fifo_outbound_name before send ing the call the queue but they made no difference.
and when I do fifo list, I cannot see any variables with that name available to set. Am I not looking in the right place.
I'm looking into <action application="set" data="fifo_orbit_dialplan=XML"/> as a potential way out, whereby as the call enters the FIFO I could record the outbound_name requested and then if I can control the call on the way out I can set it again. How does this command above allow me to send the calls out a certain way and treat them. what are the options for that fifo_orbit_dialplan
thanks Marc On Tue, Jan 25, 2011 at 2:40 AM, liuyp2 <liuyp2@asiainfo-linkage.com> wrote:
mod_fifo can't transfer sip header message which defined by myself(sip_h_X-xxx) to b-leg also.
Is there any solution in latest version?
________________________________ liuyp2 2011-01-25 ________________________________
发件人： Anthony Minessale 发送时间： 2011-01-25 09:28:25 收件人： FreeSWITCH Users Help 抄送： 主题： Re: [Freeswitch-users] Caller ID using Fifo
You should all confer to make sure you are all using fs latest git because that is the version I am talking about. Fifo has some major new features in latest that do not exist in older versions including showing the customers cid when it calls agents. The dilemma jm describes used to be true but is no longer the case with the default ringall strategy on latest git.
The customers cid is sent to the agent and if the fifo xml defines outbound_name param that will be included as well.
If you want to override it you must do what you quoted in the wiki in the dialstring contained in the member tag of the xml for that membership not in the dialplan.
On Jan 14, 2011 10:36 AM, "Marc de Corny" <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the agent answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote:
What about showing the Caller ID after it is answered? Any way to do that?
2011/1/12 João Mesquita <jmesquita@freeswitch.org>
> João Leme, > > The caller id is not passed when the phone is ringing because > mod_fifo > does not know which call is going to be sent to that channel once > it is > answered until it is really answered. I don't know if > mod_callcenter does > show anything but you should consider looking at the documentation > if you > really need this feature. > > Regards, > João Mesquita > > > On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme > <joaocarlosleme@gmail.com> > wrote: >> >> Hi there, >> I would like to know if there is a way to see the caller ID on my >> Sip >> Client (X-Lite for example) of the caller that I answear from a >> Fifo queue? >> Thanks, >> John >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Thanks Anthony it works great. The problem was my version, I was using the precompiled one but got the latest git just for that and it worked. Although to display the variable caller id you have to set on the dialplan (not on fifo.conf). On Thu, Jan 27, 2011 at 6:35 AM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
not the dialplan, the fifo config file:
autoload_configs/fifo.conf.xml
configuration name="fifo.conf" description="FIFO Configuration"> <settings> <param name="delete-all-outbound-member-on-startup" value="false"/> </settings> <fifos> <fifo name="test_fifo@$${domain}" importance="0" outbound_name="sales"> <member timeout="60" simo="1"
lag="20">{origination_caller_id_name=fred,origination_caller_id_number=1234}user/1005@ $${domain}</member> </fifo> </fifos> </configuration>
On Thu, Jan 27, 2011 at 12:55 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
Hi Anthony,
I updated it the other day.
This is my version : freeswitch@internal> version FreeSWITCH Version 1.0.head (git-6faa4c9 2010-12-02 17-11-04 -0600)
Having said that I am using remote SIP endpoints on another SIP platform, maybe that is why. I will take a closer look at the signalling and see.
thanks Marc
On Thu, Jan 27, 2011 at 1:50 AM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
If they made no difference you are not on latest GIT HEAD
On Wed, Jan 26, 2011 at 11:38 AM, Marc de Corny <marcdecorny@gmail.com> wrote:
I can see that a number of us are interested in this. I have tried to set that outbound_name and fifo_outbound_name before send ing the call the queue but they made no difference.
and when I do fifo list, I cannot see any variables with that name available to set. Am I not looking in the right place.
I'm looking into <action application="set" data="fifo_orbit_dialplan=XML"/> as a potential way out, whereby as the call enters the FIFO I could record the outbound_name requested and then if I can control the call on the way out I can set it again. How does this command above allow me to send
the
calls out a certain way and treat them. what are the options for that fifo_orbit_dialplan
thanks Marc On Tue, Jan 25, 2011 at 2:40 AM, liuyp2 <liuyp2@asiainfo-linkage.com> wrote:
mod_fifo can't transfer sip header message which defined by myself(sip_h_X-xxx) to b-leg also.
Is there any solution in latest version?
________________________________ liuyp2 2011-01-25 ________________________________
发件人： Anthony Minessale 发送时间： 2011-01-25 09:28:25 收件人： FreeSWITCH Users Help 抄送： 主题： Re: [Freeswitch-users] Caller ID using Fifo
You should all confer to make sure you are all using fs latest git because that is the version I am talking about. Fifo has some major new features in latest that do not exist in older versions including showing the customers cid when it calls agents. The dilemma jm describes used to be true
but
is no longer the case with the default ringall strategy on latest git.
The customers cid is sent to the agent and if the fifo xml defines outbound_name param that will be included as well.
If you want to override it you must do what you quoted in the wiki in the dialstring contained in the member tag of the xml for that membership not in the dialplan.
On Jan 14, 2011 10:36 AM, "Marc de Corny" <marcdecorny@gmail.com> wrote:
Just to follow up on this subject.
I have done a lot of testing on the fifo trying to get the caller_id_name changed on the outbound call to the agent and to be honest I cannot understand the explanation.
If mod_fifo does not know which call it will connect until the
agent
answers, how come it displays the CLI correctly, jsut won;t let me change it.
Still seems strange. I am looking into the Mod_callcentre to check if it sends caller_id information. but the same logic if valid could apply
Also maybe someone should change the Wiki ( I would but do not have enough expertise on the subject) because the following is a bit misleading
"Note: If you wish to specify the caller ID presented when a fifo calls an agent, set the origination_caller_id_name and origination_caller_id_num variables to the values desired. These could be set within the {} of the dialstring, or they could be set using the set application in the dialplan which places the caller into the fifo (before the 'fifo in' executed on the caller). " thanks Marc On Thu, Jan 13, 2011 at 10:47 PM, Joao Leme <joaocarlosleme@gmail.com> wrote: > > What about showing the Caller ID after it is answered? Any way to do > that? > > 2011/1/12 João Mesquita <jmesquita@freeswitch.org> > >> João Leme, >> >> The caller id is not passed when the phone is ringing because >> mod_fifo >> does not know which call is going to be sent to that channel once >> it is >> answered until it is really answered. I don't know if >> mod_callcenter does >> show anything but you should consider looking at the documentation >> if you >> really need this feature. >> >> Regards, >> João Mesquita >> >> >> On Wed, Jan 12, 2011 at 9:15 PM, Joao Leme >> <joaocarlosleme@gmail.com> >> wrote: >>> >>> Hi there, >>> I would like to know if there is a way to see the caller ID on my >>> Sip >>> Client (X-Lite for example) of the caller that I answear from a >>> Fifo queue? >>> Thanks, >>> John >>> >>> _______________________________________________ >>> FreeSWITCH-users mailing list >>> FreeSWITCH-users@lists.freeswitch.org >>> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >>> >>> >>> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >>> http://www.freeswitch.org >>> >> >> >> _______________________________________________ >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org >> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> >> >> UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Anthony Minessale
-
Joao Leme
-
João Mesquita
-
liuyp2
-
Marc de Corny
-
Michal Bielicki