Hi, This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me! But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says: 2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error: Also I'm getting the following Sangoma alarms: ***** w1g1: E1 Alarms (Framer) ***** ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF ***** w1g1: E1 Alarms (LIU) ***** Short Circuit: ON Open Circuit: OFF Loss of Signal: ON Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config? Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear? Thanks in advance, Niall. -- -- Sremium Ltd. Reg Number: 451937 Mobile: +353 (0)87 2393174 Web: www.sremium.com The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of Sremium. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
Pastebin your configs. Also, are you using libpri? -MC Sent from my iPhone On Jul 30, 2009, at 7:26 AM, Niall Crosby <niall.crosby@gmail.com> wrote:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
-- -- Sremium Ltd.
Reg Number: 451937
Mobile: +353 (0)87 2393174 Web: www.sremium.com
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of Sremium. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Not libpri (hadn't heard of this), am using Openzap. Sangoma support got back and say that the alarms should be cleared even when Freeswitch is not running (which is not the case for me) so looks like it's nothing to do with Freeswitch. Also Sangoma pointed out to me that my Rx Level is < -44db which I'm told is far to low. So think it best not to take time on the Freeswitch list until I get my hardware sorted out. ;-) Thanks, Niall. 2009/7/30 Michael S Collins <msc@freeswitch.org>:
Pastebin your configs. Also, are you using libpri?
-MC
Sent from my iPhone
On Jul 30, 2009, at 7:26 AM, Niall Crosby <niall.crosby@gmail.com> wrote:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
-- -- Sremium Ltd.
Reg Number: 451937
Mobile: +353 (0)87 2393174 Web: www.sremium.com
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of Sremium. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -- Sremium Ltd. Reg Number: 451937 Mobile: +353 (0)87 2393174 Web: www.sremium.com The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of Sremium. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
Firstly I would try get get rid of the sangoma errors. There are 2 errors: Short Circuit: ON Loss of Signal: ON So either the card is not configured correctly or there is a cabling problem. What is your wanpipe1.conf? Second, if euro doesn't work, try Q931. I had success with that some time ago. Best regards Peter Niall Crosby schrieb:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
Thanks for help. Got my alarms sorted - telco had problem there. As for my Freeswitch problem, chaning to Q931 clears the error message. I was asked by telco to specifically use telco, will using Q931 cause any issues for me? Thanks again, Niall. 2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
Firstly I would try get get rid of the sangoma errors. There are 2 errors:
Short Circuit: ON Loss of Signal: ON
So either the card is not configured correctly or there is a cabling problem. What is your wanpipe1.conf?
Second, if euro doesn't work, try Q931. I had success with that some time ago.
Best regards Peter
Niall Crosby schrieb:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -- Sremium Ltd. Reg Number: 451937 Mobile: +353 (0)87 2393174 Web: www.sremium.com The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of Sremium. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Sorry, I do not not understand that question. Best regards Peter Niall Crosby schrieb:
Thanks for help.
Got my alarms sorted - telco had problem there.
As for my Freeswitch problem, chaning to Q931 clears the error message.
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Thanks again, Niall.
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
Firstly I would try get get rid of the sangoma errors. There are 2 errors:
Short Circuit: ON Loss of Signal: ON
So either the card is not configured correctly or there is a cabling problem. What is your wanpipe1.conf?
Second, if euro doesn't work, try Q931. I had success with that some time ago.
Best regards Peter
Niall Crosby schrieb:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sorry, my mistake. I was asked by telco to specifically use Euro dialect, will using Q931 cause any issues? tnks 2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Sorry, I do not not understand that question.
Best regards Peter
Niall Crosby schrieb:
Thanks for help.
Got my alarms sorted - telco had problem there.
As for my Freeswitch problem, chaning to Q931 clears the error message.
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Thanks again, Niall.
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
Firstly I would try get get rid of the sangoma errors. There are 2 errors:
Short Circuit: ON Loss of Signal: ON
So either the card is not configured correctly or there is a cabling problem. What is your wanpipe1.conf?
Second, if euro doesn't work, try Q931. I had success with that some time ago.
Best regards Peter
Niall Crosby schrieb:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -- Sremium Ltd. Reg Number: 451937 Mobile: +353 (0)87 2393174 Web: www.sremium.com The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of Sremium. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
euro and q931 are the same thing on most devices. Europe uses pure q931 where most other places use "enhanced" versions of it. On Fri, Jul 31, 2009 at 9:45 AM, Niall Crosby <niall.crosby@gmail.com>wrote:
Sorry, my mistake.
I was asked by telco to specifically use Euro dialect, will using Q931 cause any issues?
tnks
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Sorry, I do not not understand that question.
Best regards Peter
Niall Crosby schrieb:
Thanks for help.
Got my alarms sorted - telco had problem there.
As for my Freeswitch problem, chaning to Q931 clears the error message.
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Thanks again, Niall.
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
Firstly I would try get get rid of the sangoma errors. There are 2 errors:
Short Circuit: ON Loss of Signal: ON
So either the card is not configured correctly or there is a cabling problem. What is your wanpipe1.conf?
Second, if euro doesn't work, try Q931. I had success with that some time ago.
Best regards Peter
Niall Crosby schrieb:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- -- Sremium Ltd.
Reg Number: 451937
Mobile: +353 (0)87 2393174 Web: www.sremium.com
The information transmitted is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material. Statements and opinions expressed in this e-mail may not represent those of Sremium. Any review, retransmission, dissemination or other use of, or taking of any action in reliance upon, this information by persons or entities other than the intended recipient is prohibited. If you received this in error, please contact the sender immediately and delete the material from any computer.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400
Q.931 and Q.921 are protocols for Euro ISDN. So this is the right protocol. See here: http://www.voip-info.org/wiki/view/EuroISDN Best regards Peter Niall Crosby schrieb:
Sorry, my mistake.
I was asked by telco to specifically use Euro dialect, will using Q931 cause any issues?
tnks
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Sorry, I do not not understand that question.
Best regards Peter
Niall Crosby schrieb:
Thanks for help.
Got my alarms sorted - telco had problem there.
As for my Freeswitch problem, chaning to Q931 clears the error message.
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Thanks again, Niall.
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
Firstly I would try get get rid of the sangoma errors. There are 2 errors:
Short Circuit: ON Loss of Signal: ON
So either the card is not configured correctly or there is a cabling problem. What is your wanpipe1.conf?
Second, if euro doesn't work, try Q931. I had success with that some time ago.
Best regards Peter
Niall Crosby schrieb:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Anthony Minessale
-
Michael S Collins
-
Niall Crosby
-
Peter P GMX