Q.931 and Q.921 are protocols for Euro ISDN. So this is the right protocol. See here: http://www.voip-info.org/wiki/view/EuroISDN Best regards Peter Niall Crosby schrieb:
Sorry, my mistake.
I was asked by telco to specifically use Euro dialect, will using Q931 cause any issues?
tnks
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Sorry, I do not not understand that question.
Best regards Peter
Niall Crosby schrieb:
Thanks for help.
Got my alarms sorted - telco had problem there.
As for my Freeswitch problem, chaning to Q931 clears the error message.
I was asked by telco to specifically use telco, will using Q931 cause any issues for me?
Thanks again, Niall.
2009/7/31 Peter P GMX <Prometheus001@gmx.net>:
Firstly I would try get get rid of the sangoma errors. There are 2 errors:
Short Circuit: ON Loss of Signal: ON
So either the card is not configured correctly or there is a cabling problem. What is your wanpipe1.conf?
Second, if euro doesn't work, try Q931. I had success with that some time ago.
Best regards Peter
Niall Crosby schrieb:
Hi,
This might be Sangoma config issue, so apologies in advance for posting it here if it is. I am waiting for Sangoma helpdesk to get back to me!
But I have a Sangoma a101 and trying to get it working with Freeswitch. Have E1 line coming from telco and everything set up correctly (to my best efforts), however when Freeswitch starts, it says:
2009-07-30 15:17:15.446569 [ERR] mod_openzap.c:1953 Error starting OpenZAP span 1 mode: user dialect: euro error:
Also I'm getting the following Sangoma alarms:
***** w1g1: E1 Alarms (Framer) *****
ALOS: OFF | LOS: ON RED: ON | AIS: OFF OOF: ON | RAI: OFF
***** w1g1: E1 Alarms (LIU) *****
Short Circuit: ON Open Circuit: OFF Loss of Signal: ON
Can someone tell me where I should be focusing my attention - on the Sangoma config or the Freeswitch config?
Also what state should the Sangoma alarms be in when Freeswitch is NOT running? Should they all clear?
Thanks in advance, Niall.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org