Sangoma A101 - 1 port E1/T1 Red Alarm
Hi, I dont know whether I can post this question here or not.. But, I dont know any other place. I hope any one can help here . I recently bought the Sangoma A101 - 1 port E1/T1 card and installed on CENT OS 5.4. I am using it for E1 PRI line in INDIA. * Here is the output of "wanrouter status" command* Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 50 | 0 | 1 | N/A | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected | * Here is the output of "**wanpipemon -i w1g1 -c Ta" the * ***** w1g1: E1 Rx Alarms (Framer) ***** ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF ***** w1g1: E1 Rx Alarms (LIU) ***** Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF ***** w1g1: E1 Tx Alarms ***** AIS: OFF | YEL: OFF ***** w1g1: E1 Performance Monitoring Counters ***** Line Code Violation : 1163 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 3 Rx Level : > -2.5db I spoke with my telco, they checked the line and there is no issue. I don't know what to do? Pls anyone help me? Regards, Venkat.
On Tue, Jul 13, 2010 at 18:26, ovvenkat <ovvenkatesan@gmail.com> wrote:
Hi,
I dont know whether I can post this question here or not.. But, I dont know any other place. I hope any one can help here .
I recently bought the Sangoma A101 - 1 port E1/T1 card and installed on CENT OS 5.4. I am using it for E1 PRI line in INDIA.
* Here is the output of "wanrouter status" command*
Devices currently active: wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 50 | 0 | 1 | N/A | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected |
* Here is the output of "**wanpipemon -i w1g1 -c Ta" the *
***** w1g1: E1 Rx Alarms (Framer) *****
ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF
What RED alarm? :) Its fine, your E1 is up
***** w1g1: E1 Rx Alarms (LIU) *****
Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF
***** w1g1: E1 Tx Alarms *****
AIS: OFF | YEL: OFF
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation : 1163 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 3
Rx Level : > -2.5db
I spoke with my telco, they checked the line and there is no issue. I don't know what to do? Pls anyone help me?
Regards, Venkat.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ...
On Tue, Jul 13, 2010 at 7:11 PM, Wasim Baig <wasim@convergence.pk> wrote:
On Tue, Jul 13, 2010 at 18:26, ovvenkat <ovvenkatesan@gmail.com> wrote:
Hi,
I dont know whether I can post this question here or not.. But, I dont know any other place. I hope any one can help here .
I recently bought the Sangoma A101 - 1 port E1/T1 card and installed on CENT OS 5.4. I am using it for E1 PRI line in INDIA.
* Here is the output of "wanrouter status" command*
Devices currently active: wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 50 | 0 | 1 | N/A | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected |
* Here is the output of "**wanpipemon -i w1g1 -c Ta" the *
***** w1g1: E1 Rx Alarms (Framer) *****
ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF
What RED alarm? :) Its fine, your E1 is up
***** w1g1: E1 Rx Alarms (LIU) *****
Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF
***** w1g1: E1 Tx Alarms *****
AIS: OFF | YEL: OFF
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation : 1163 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 3
Rx Level : > -2.5db
I spoke with my telco, they checked the line and there is no issue. I don't know what to do? Pls anyone help me?
Regards, Venkat.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ...
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi, Here is the current status of the SHDSL modem PWR : Green Sync : Green ALM : Red PRI Card : Green -- If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together. Regards Venkatesan OV.
I don't wanna sound like a broken record here but can we please learn to properly reply to emails so the thread is easy to follow and things don't get lost because to be honest this thread is the hardest to follow. /b On Jul 13, 2010, at 8:51 AM, ovvenkat wrote:
Hi,
Here is the current status of the SHDSL modem
PWR : Green Sync : Green ALM : Red PRI Card : Green
--
If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together.
Regards Venkatesan OV.
Sorry Brian, I made a mistake with my last reply I hope I am correcting it here :) . When I checked the card status, its shows everything is fine. But, SHDSL modem is indicating alarm status is on. Here is the current status of the SHDSL modem PWR : Green Sync : Green ALM : Red *PRI card status* PRI Card : Green On Tue, Jul 13, 2010 at 7:11 PM, Wasim Baig <wasim@convergence.pk> wrote:
On Tue, Jul 13, 2010 at 18:26, ovvenkat <ovvenkatesan@gmail.com> wrote:
Hi,
I dont know whether I can post this question here or not.. But, I dont know any other place. I hope any one can help here .
I recently bought the Sangoma A101 - 1 port E1/T1 card and installed on CENT OS 5.4. I am using it for E1 PRI line in INDIA.
* Here is the output of "wanrouter status" command*
Devices currently active: wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 50 | 0 | 1 | N/A | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected |
* Here is the output of "**wanpipemon -i w1g1 -c Ta" the *
***** w1g1: E1 Rx Alarms (Framer) *****
ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF
What RED alarm? :) Its fine, your E1 is up
***** w1g1: E1 Rx Alarms (LIU) *****
Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF
***** w1g1: E1 Tx Alarms *****
AIS: OFF | YEL: OFF
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation : 1163 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 3
Rx Level : > -2.5db
I spoke with my telco, they checked the line and there is no issue. I don't know what to do? Pls anyone help me?
Regards, Venkat.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ...
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together. Regards Venkatesan OV.
Sorry Brian, I made a mistake with my last reply I hope I am correcting it here :) . When I checked the card status, its shows everything is fine. But, SHDSL modem is indicating alarm status is on. Here is the current status of the SHDSL modem PWR : Green Sync : Green ALM : Red *PRI card status* PRI Card : Green On Tue, Jul 13, 2010 at 7:11 PM, Wasim Baig <wasim@convergence.pk> wrote:
On Tue, Jul 13, 2010 at 18:26, ovvenkat <ovvenkatesan@gmail.com> wrote:
Hi,
I dont know whether I can post this question here or not.. But, I dont know any other place. I hope any one can help here .
I recently bought the Sangoma A101 - 1 port E1/T1 card and installed on CENT OS 5.4. I am using it for E1 PRI line in INDIA.
* Here is the output of "wanrouter status" command*
Devices currently active: wanpipe1
Wanpipe Config:
Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A101/1D/A102/2D/4/4D/8| 50 | 0 | 1 | N/A | 0 |
Wanrouter Status:
Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected |
* Here is the output of "**wanpipemon -i w1g1 -c Ta" the *
***** w1g1: E1 Rx Alarms (Framer) *****
ALOS: OFF | LOS: OFF RED: OFF | AIS: OFF LOF: OFF | RAI: OFF
What RED alarm? :) Its fine, your E1 is up
***** w1g1: E1 Rx Alarms (LIU) *****
Short Circuit: OFF Open Circuit: OFF Loss of Signal: OFF
***** w1g1: E1 Tx Alarms *****
AIS: OFF | YEL: OFF
***** w1g1: E1 Performance Monitoring Counters *****
Line Code Violation : 1163 Far End Block Errors : 0 CRC4 Errors : 0 FAS Errors : 3
Rx Level : > -2.5db
I spoke with my telco, they checked the line and there is no issue. I don't know what to do? Pls anyone help me?
Regards, Venkat.
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- wasim h. baig | principal consultant | convergence pk | +92 30 0850 8070 | peace be upon you ...
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together. Regards Venkatesan OV. -- If you have come to help me, you are wasting your time. If you have come to because your liberation is bound up in mine, we can work together. Regards Venkatesan OV.
participants (3)
-
Brian West
-
ovvenkat
-
Wasim Baig