On 04/25/2012 12:08 AM, Haythem Horbit wrote:
I had disabled echo canceller modules but the problem didn't resolved ( wctdm24xxp 0000:25:08.0: VPM: Support Disabled see : http://kb.digium.com/articles/FAQ/How-do-I-disable-echo-cancellation-module-... <http://kb.digium.com/articles/FAQ/How-do-I-disable-echo-cancellation-module-without-removing-the-hardware?retURL=%2F&popup=false>) I'am using mod_freetdm (dahdi) Try relaxing the DTMF twist thresholds. The need for that seems to typically be a problem with calls from cellular systems, but it can happen elsewhere when something is screwing badly with the frequency response. Someone put changes into git recently so you can change the setting through channel variables.
Steve
2012/4/24 Steve Underwood <steveu@coppice.org <mailto:steveu@coppice.org>>
On 04/24/2012 07:46 PM, Haythem Horbit wrote: > Hi, > > We experience some issues to capture SIA ContactID messages from an > alarm system, with Freeswitch, > the problem is that some DTMFs are missed randomly, so that we can't > have a correct message > we use a Digium card 'AEX2400' with DAHDI drivers, the alarm system is > connected to an FXO port. > > We see in the freeswitch log that software DTMF detection is enabled, > may be the issue comes from this fact... > > So our question is: how can we enable hardware DTMF detection in DADHI > configuration with freeswitch, > and how to disable software DTMF detection in freeswitch Does your card have one of those octasic echo canceller modules? Those things are a menace.
Steve