How to enable Hardware DTMF detection (Dahdi/Digium card)
Hi, We experience some issues to capture SIA ContactID messages from an alarm system, with Freeswitch, the problem is that some DTMFs are missed randomly, so that we can't have a correct message we use a Digium card 'AEX2400' with DAHDI drivers, the alarm system is connected to an FXO port. We see in the freeswitch log that software DTMF detection is enabled, may be the issue comes from this fact... So our question is: how can we enable hardware DTMF detection in DADHI configuration with freeswitch, and how to disable software DTMF detection in freeswitch -- *Haythem HORBIT Responsable développement NGI Maghreb* 53, rue 8601 - 2035 Charguia I Tunis - TUNISIE Tél. : +216 71 808 565 Fax : +216 71 808 395 Gsm : +216 28 801 737 www.ngi-maghreb.com
On 04/24/2012 07:46 PM, Haythem Horbit wrote:
Hi,
We experience some issues to capture SIA ContactID messages from an alarm system, with Freeswitch, the problem is that some DTMFs are missed randomly, so that we can't have a correct message we use a Digium card 'AEX2400' with DAHDI drivers, the alarm system is connected to an FXO port.
We see in the freeswitch log that software DTMF detection is enabled, may be the issue comes from this fact...
So our question is: how can we enable hardware DTMF detection in DADHI configuration with freeswitch, and how to disable software DTMF detection in freeswitch Does your card have one of those octasic echo canceller modules? Those things are a menace.
Steve
I had disabled echo canceller modules but the problem didn't resolved ( wctdm24xxp 0000:25:08.0: VPM: Support Disabled see : http://kb.digium.com/articles/FAQ/How-do-I-disable-echo-cancellation-module-... ) I'am using mod_freetdm (dahdi) 2012/4/24 Steve Underwood <steveu@coppice.org>
On 04/24/2012 07:46 PM, Haythem Horbit wrote:
Hi,
We experience some issues to capture SIA ContactID messages from an alarm system, with Freeswitch, the problem is that some DTMFs are missed randomly, so that we can't have a correct message we use a Digium card 'AEX2400' with DAHDI drivers, the alarm system is connected to an FXO port.
We see in the freeswitch log that software DTMF detection is enabled, may be the issue comes from this fact...
So our question is: how can we enable hardware DTMF detection in DADHI configuration with freeswitch, and how to disable software DTMF detection in freeswitch Does your card have one of those octasic echo canceller modules? Those things are a menace.
Steve
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Haythem HORBIT Responsable développement NGI Maghreb* 53, rue 8601 - 2035 Charguia I Tunis - TUNISIE Tél. : +216 71 808 565 Fax : +216 71 808 395 Gsm : +216 28 801 737 www.ngi-maghreb.com P Before printing, think about ENVIRONMENTAL responsibility
On 04/25/2012 12:08 AM, Haythem Horbit wrote:
I had disabled echo canceller modules but the problem didn't resolved ( wctdm24xxp 0000:25:08.0: VPM: Support Disabled see : http://kb.digium.com/articles/FAQ/How-do-I-disable-echo-cancellation-module-... <http://kb.digium.com/articles/FAQ/How-do-I-disable-echo-cancellation-module-without-removing-the-hardware?retURL=%2F&popup=false>) I'am using mod_freetdm (dahdi) Try relaxing the DTMF twist thresholds. The need for that seems to typically be a problem with calls from cellular systems, but it can happen elsewhere when something is screwing badly with the frequency response. Someone put changes into git recently so you can change the setting through channel variables.
Steve
2012/4/24 Steve Underwood <steveu@coppice.org <mailto:steveu@coppice.org>>
On 04/24/2012 07:46 PM, Haythem Horbit wrote: > Hi, > > We experience some issues to capture SIA ContactID messages from an > alarm system, with Freeswitch, > the problem is that some DTMFs are missed randomly, so that we can't > have a correct message > we use a Digium card 'AEX2400' with DAHDI drivers, the alarm system is > connected to an FXO port. > > We see in the freeswitch log that software DTMF detection is enabled, > may be the issue comes from this fact... > > So our question is: how can we enable hardware DTMF detection in DADHI > configuration with freeswitch, > and how to disable software DTMF detection in freeswitch Does your card have one of those octasic echo canceller modules? Those things are a menace.
Steve
participants (2)
-
Haythem Horbit
-
Steve Underwood