Hello I have tried the same setup but this time using a windows build FS1.0.4 on an XP machine and all is fine. The sample 1001 and 1002 IDs work without any tweaking at all. Could the problem be with the linux build 1.0.4.? I am running on an FC11 machine. On the FC11 box I used the svn link to build using the ff: bootstarp.sh configure withoout libcurl to eliinate the spidermonkey lib error make make install Did I miss anything ? In a nutshell I can get the sample test to work using a windows-based version Thanks d Samuel 'Otis' Abekah-Mensah wrote:
<div class="moz-text-flowed" style="font-family: -moz-fixed">Hello
thanks so much. The machines are on the same lan , 2 have static IP with one on DHCP just for variation . I do get there errors on stating FS 1. Error stacksize too large 4194303 offers advise to run ./freeswitch -wate 2. Error checking for PMP [GENERAL ERROR] and 3. [WARNING] sofia_reg.c:1788: Can't register a pointer I do not know if any of this is could help The 2 boxes I run X-lite from are windows 2k service pack 4
Oh I ahve had a go and I am now getting Error 403 - Forbidden on the Xlite clients side.
I have also tried using Zoiper but it seems to register but then comes up with an error "bearercapability "
Thanks for your time, Michael and may thanks Brian. I am not sure if the iptables bit has caused the change from error 408 to error 403.
Thanks; I apperecitae your help .
Michael Collins wrote:
On Sat, Nov 14, 2009 at 5:18 PM, Samuel Abekah-Mensah <abeka@greatiam.com <mailto:abeka@greatiam.com>> wrote:
Hello
Please pardon me if the solution to this is somewhere already that I have been unable to locate. I have just got a straight out-of-the-box build of FS. According to the wiki, I should be able to test using user IDs 1001 and 1002. However, I am get the above error. If I, however, un-tick register with domain I do net get the error but does not communicate either. Is there a conf that I should have done ?
I am using X-lite3
Is NAT involved or are the x-lite clients on the same LAN? Also, you might want to turn on a SIP trace at the console to see if there are any clues. -MC
</div>