Hello I have tried the same setup but this time using a windows build FS1.0.4 on an XP machine and all is fine. The sample 1001 and 1002 IDs work without any tweaking at all. Could the problem be with the linux build 1.0.4.? I am running on an FC11 machine. On the FC11 box I used the svn link to build using the ff: bootstarp.sh configure withoout libcurl to eliinate the spidermonkey lib error make make install Did I miss anything ? In a nutshell I can get the sample test to work using a windows-based version Thanks d Samuel 'Otis' Abekah-Mensah wrote:

<div class="moz-text-flowed" style="font-family: -moz-fixed">Hello

thanks so much. The machines are on the same lan , 2 have static IP with one on DHCP just for variation . I do get there errors on stating FS 1. Error stacksize too large 4194303 offers advise to run ./freeswitch -wate 2. Error checking for PMP [GENERAL ERROR] and 3. [WARNING] sofia_reg.c:1788: Can't register a pointer I do not know if any of this is could help The 2 boxes I run X-lite from are windows 2k service pack 4

Oh I ahve had a go and I am now getting Error 403 - Forbidden on the Xlite clients side.

I have also tried using Zoiper but it seems to register but then comes up with an error "bearercapability "

Thanks for your time, Michael and may thanks Brian. I am not sure if the iptables bit has caused the change from error 408 to error 403.

Thanks; I apperecitae your help .

Michael Collins wrote:

...

On Sat, Nov 14, 2009 at 5:18 PM, Samuel Abekah-Mensah <abeka@greatiam.com <mailto:abeka@greatiam.com>> wrote:

Hello

Please pardon me if the solution to this is somewhere already that I have been unable to locate. I have just got a straight out-of-the-box build of FS. According to the wiki, I should be able to test using user IDs 1001 and 1002. However, I am get the above error. If I, however, un-tick register with domain I do net get the error but does not communicate either. Is there a conf that I should have done ?

I am using X-lite3

Is NAT involved or are the x-lite clients on the same LAN? Also, you might want to turn on a SIP trace at the console to see if there are any clues. -MC

</div>

Thank you so much for your responses. I have resolved the problem somehow. I copied the default.xml from the root conf folder, the sample 1001 and 1002 .xml on a windows build to the Fedora 11 machine and that worked. I guessed the rejection was with the configuration on theFedora box.even though it was more straight -out-of-the-box. No one is seeking help on this so it must be something I did. I am reinstalling FC11 from scartch and see if I can reproduce the error after FS-1.0.4 install. Thanks folks . Michael Collins wrote:

Try doing this: http://wiki.freeswitch.org/wiki/Quick_and_Dirty_Install

-MC

On Tue, Nov 17, 2009 at 7:12 AM, Sam Abekah-Mensah <abeka@greatiam.com <mailto:abeka@greatiam.com>> wrote:

Hello

I have tried the same setup but this time using a windows build FS1.0.4 on an XP machine and all is fine. The sample 1001 and 1002 IDs work without any tweaking at all. Could the problem be with the linux build 1.0.4.? I am running on an FC11 machine.

On the FC11 box I used the svn link to build using the ff:

bootstarp.sh configure withoout libcurl to eliinate the spidermonkey lib error make make install

Did I miss anything ?

Thanks. I will look up how to debug on the wiki. Kinda late now with my setup; got to learn it anyway. Thanks for the direction. Brian West wrote:

<div class="moz-text-flowed" style="font-family: -moz-fixed">403 is Forbidden, So its not really an error you're just getting told NO. You should follow the guide on the wiki on how to debug.

1. Turn on SIP Trace. sofia profile xxx siptrace on 2. Press F8

The error logs are very verbose and usually point to the problem.

/b

On Nov 18, 2009, at 4:43 AM, Sam Abekah-Mensah wrote:

...

Thank you so much for your responses.

I have resolved the problem somehow. I copied the default.xml from the root conf folder, the sample 1001 and 1002 .xml on a windows build to the Fedora 11 machine and that worked. I guessed the rejection was with the configuration on theFedora box.even though it was more straight -out-of-the-box. No one is seeking help on this so it must be something I did.

I am reinstalling FC11 from scartch and see if I can reproduce the error after FS-1.0.4 install.

Thanks folks

</div>