Re: [Freeswitch-users] Diff between the transfer and bridge application?I run freeswitch in the multi domain mode. I am getting complaints about cross domain calls. For example, a DID should go to ext 21@xxx1.voice2net.ca and it does but it also goes to 21@xxx2.voice2net.ca My dial plan bridges as follows; <action application="bridge" data="{sip_invite_domain=xxx1.voice2net.ca,presence_id=21@xxx1.voice2net.ca}user/21@xxx1.voice2net.ca"/> Registrations are fine and most calling works perfectly, but I get this a few times a day. I commented out the following to support multiple domains <!--all inbound reg will look in this domain for the users --> <!--<param name="force-register-domain" value="$${domain}"/>--> <!--force the domain in subscriptions to this value --> <!--<param name="force-subscription-domain" value="$${domain}"/>--> <!--all inbound reg will stored in the db using this domain --> <!--<param name="force-register-db-domain" value="$${domain}"/>--> Any thoughts?? Darcy Primrose