Hi, San A200 FXO is woking with wanpipe, and freeswitch detects and init : 2010-07-01 09:07:15.427539 [NOTICE] switch_loadable_module.c:145 Adding Endpoint 'loopback' 2010-07-01 09:07:15.428061 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/modules.conf. 2010-07-01 09:07:15.428125 [NOTICE] zap_io.c:3058 Modules configured: 1 2010-07-01 09:07:15.428137 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/openzap.conf. 2010-07-01 09:07:15.428161 [DEBUG] zap_io.c:2588 found config for span 2010-07-01 09:07:15.428404 [INFO] zap_io.c:2859 Loading IO from /usr/local/freeswitch/mod/ozmod_wanpipe.so [wanpipe] 2010-07-01 09:07:15.428418 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/wanpipe.conf. 2010-07-01 09:07:15.428467 [INFO] zap_io.c:2605 auto-loaded 'wanpipe' 2010-07-01 09:07:15.428494 [DEBUG] zap_io.c:2626 created span 1 (FXO) of type wanpipe 2010-07-01 09:07:15.428503 [DEBUG] zap_io.c:2639 span 1 [name]=[OpenZAP] 2010-07-01 09:07:15.428510 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:1] 2010-07-01 09:07:15.428518 [DEBUG] zap_io.c:2668 setting trunk type to 'FXO' start(KEWL) 2010-07-01 09:07:15.428570 [INFO] ozmod_wanpipe.c:330 configuring device s1c1 as OpenZAP device 1:1 fd:41 DTMF: hardware 2010-07-01 09:07:15.428587 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:2] 2010-07-01 09:07:15.428632 [INFO] ozmod_wanpipe.c:330 configuring device s1c2 as OpenZAP device 1:2 fd:42 DTMF: hardware 2010-07-01 09:07:15.428643 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:3] 2010-07-01 09:07:15.428695 [INFO] ozmod_wanpipe.c:330 configuring device s1c3 as OpenZAP device 1:3 fd:43 DTMF: hardware 2010-07-01 09:07:15.428707 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:4] 2010-07-01 09:07:15.428748 [INFO] ozmod_wanpipe.c:330 configuring device s1c4 as OpenZAP device 1:4 fd:44 DTMF: hardware 2010-07-01 09:07:15.428774 [INFO] zap_io.c:2783 Configured 4 channel(s) 2010-07-01 09:07:15.428920 [INFO] zap_io.c:2876 Loading SIG from /usr/local/freeswitch/mod/ozmod_analog.so 2010-07-01 09:07:15.428932 [INFO] zap_io.c:2992 auto-loaded 'analog' 2010-07-01 09:07:15.428943 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:1 2010-07-01 09:07:15.428957 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:2 2010-07-01 09:07:15.428963 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:3 2010-07-01 09:07:15.428970 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:4 2010-07-01 09:07:15.428977 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/tones.conf. 2010-07-01 09:07:15.429003 [DEBUG] zap_io.c:551 added tone generation [dial] = [v=-7;%(1000,0,350,440)] 2010-07-01 09:07:15.429028 [DEBUG] zap_io.c:549 added tone detect [dial] = [350,440] 2010-07-01 09:07:15.429037 [DEBUG] zap_io.c:551 added tone generation [ring] = [v=-7;%(2000,4000,440,480)] 2010-07-01 09:07:15.429045 [DEBUG] zap_io.c:549 added tone detect [ring] = [440,480] 2010-07-01 09:07:15.429053 [DEBUG] zap_io.c:551 added tone generation [busy] = [v=-7;%(500,500,480,620)] 2010-07-01 09:07:15.429062 [DEBUG] zap_io.c:549 added tone detect [busy] = [480,620] 2010-07-01 09:07:15.429070 [DEBUG] zap_io.c:551 added tone generation [attn] = [v=0;%(100,100,1400,2060,2450,2600)] 2010-07-01 09:07:15.429078 [DEBUG] zap_io.c:549 added tone detect [attn] = [1400,2060,2450,2600] 2010-07-01 09:07:15.429086 [DEBUG] zap_io.c:551 added tone generation [callwaiting-sas] = [v=0;%(300,0,440)] 2010-07-01 09:07:15.429095 [DEBUG] zap_io.c:549 added tone detect [callwaiting-sas] = [440] 2010-07-01 09:07:15.429104 [DEBUG] zap_io.c:551 added tone generation [callwaiting-cas] = [v=0;%(80,0,2750,2130)] 2010-07-01 09:07:15.429113 [DEBUG] zap_io.c:549 added tone detect [callwaiting-cas] = [2750,2130] 2010-07-01 09:07:15.429125 [DEBUG] zap_io.c:549 added tone detect [fail1] = [913.8] 2010-07-01 09:07:15.429134 [DEBUG] zap_io.c:549 added tone detect [fail2] = [1370.6] 2010-07-01 09:07:15.429141 [DEBUG] zap_io.c:549 added tone detect [fail3] = [1776.7] 2010-07-01 09:07:15.429219 [NOTICE] switch_loadable_module.c:145 Adding Endpoint 'openzap' 2010-07-01 09:07:15.429254 [NOTICE] switch_loadable_module.c:251 Adding Application 'disable_ec' 2010-07-01 09:07:15.429290 [NOTICE] switch_loadable_module.c:251 Adding Application 'disable_dtmf' 2010-07-01 09:07:15.429332 [NOTICE] switch_loadable_module.c:251 Adding Application 'enable_dtmf' 2010-07-01 09:07:15.429381 [NOTICE] switch_loadable_module.c:273 Adding API Function 'oz' openzap.conf: [span wanpipe FXO] name => OpenZAP fxo-channel => 1:1 fxo-channel => 1:2 fxo-channel => 1:3 fxo-channel => 1:4 openzap.conf.xml: configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <boost_spans> </boost_spans> <analog_spans> <span id="FXO"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration> wanrouter status Devices currently active: wanpipe1 Wanpipe Config: Device name | Protocol Map | Adapter | IRQ | Slot/IO | If's | CLK | Baud rate | wanpipe1 | N/A | A200/A400/B600/B700| 177 | 4 | 1 | N/A | 0 | Wanrouter Status: Device name | Protocol | Station | Status | wanpipe1 | A-ANALOG | N/A | Connected | My questions, is how can I use this trunk, line 1-4, to dial ? I couldn't find a similar example using A200 Analog, could you please send me an example? Thanks, -:D