2010-07-01 09:07:15.427539 [NOTICE] switch_loadable_module.c:145 Adding Endpoint 'loopback'

2010-07-01 09:07:15.428061 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/modules.conf.

2010-07-01 09:07:15.428125 [NOTICE] zap_io.c:3058 Modules configured: 1

2010-07-01 09:07:15.428137 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/openzap.conf.

2010-07-01 09:07:15.428161 [DEBUG] zap_io.c:2588 found config for span

2010-07-01 09:07:15.428404 [INFO] zap_io.c:2859 Loading IO from /usr/local/freeswitch/mod/ozmod_wanpipe.so [wanpipe]

2010-07-01 09:07:15.428418 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/wanpipe.conf.

2010-07-01 09:07:15.428467 [INFO] zap_io.c:2605 auto-loaded 'wanpipe'

2010-07-01 09:07:15.428494 [DEBUG] zap_io.c:2626 created span 1 (FXO) of type wanpipe

2010-07-01 09:07:15.428503 [DEBUG] zap_io.c:2639 span 1 [name]=[OpenZAP]

2010-07-01 09:07:15.428510 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:1]

2010-07-01 09:07:15.428518 [DEBUG] zap_io.c:2668 setting trunk type to 'FXO' start(KEWL)

2010-07-01 09:07:15.428570 [INFO] ozmod_wanpipe.c:330 configuring device s1c1 as OpenZAP device 1:1 fd:41 DTMF: hardware

2010-07-01 09:07:15.428587 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:2]

2010-07-01 09:07:15.428632 [INFO] ozmod_wanpipe.c:330 configuring device s1c2 as OpenZAP device 1:2 fd:42 DTMF: hardware

2010-07-01 09:07:15.428643 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:3]

2010-07-01 09:07:15.428695 [INFO] ozmod_wanpipe.c:330 configuring device s1c3 as OpenZAP device 1:3 fd:43 DTMF: hardware

2010-07-01 09:07:15.428707 [DEBUG] zap_io.c:2639 span 1 [fxo-channel]=[1:4]

2010-07-01 09:07:15.428748 [INFO] ozmod_wanpipe.c:330 configuring device s1c4 as OpenZAP device 1:4 fd:44 DTMF: hardware

2010-07-01 09:07:15.428774 [INFO] zap_io.c:2783 Configured 4 channel(s)

2010-07-01 09:07:15.428920 [INFO] zap_io.c:2876 Loading SIG from /usr/local/freeswitch/mod/ozmod_analog.so

2010-07-01 09:07:15.428932 [INFO] zap_io.c:2992 auto-loaded 'analog'

2010-07-01 09:07:15.428943 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:1

2010-07-01 09:07:15.428957 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:2

2010-07-01 09:07:15.428963 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:3

2010-07-01 09:07:15.428970 [DEBUG] ozmod_analog.c:184 Enabling call waiting for channel 1:4

2010-07-01 09:07:15.428977 [DEBUG] zap_config.c:56 Configuration file is /usr/local/freeswitch/conf/tones.conf.

2010-07-01 09:07:15.429003 [DEBUG] zap_io.c:551 added tone generation [dial] = [v=-7;%(1000,0,350,440)]

2010-07-01 09:07:15.429028 [DEBUG] zap_io.c:549 added tone detect [dial] = [350,440]

2010-07-01 09:07:15.429037 [DEBUG] zap_io.c:551 added tone generation [ring] = [v=-7;%(2000,4000,440,480)]

2010-07-01 09:07:15.429045 [DEBUG] zap_io.c:549 added tone detect [ring] = [440,480]

2010-07-01 09:07:15.429053 [DEBUG] zap_io.c:551 added tone generation [busy] = [v=-7;%(500,500,480,620)]

2010-07-01 09:07:15.429062 [DEBUG] zap_io.c:549 added tone detect [busy] = [480,620]

2010-07-01 09:07:15.429070 [DEBUG] zap_io.c:551 added tone generation [attn] = [v=0;%(100,100,1400,2060,2450,2600)]

2010-07-01 09:07:15.429078 [DEBUG] zap_io.c:549 added tone detect [attn] = [1400,2060,2450,2600]

2010-07-01 09:07:15.429086 [DEBUG] zap_io.c:551 added tone generation [callwaiting-sas] = [v=0;%(300,0,440)]

2010-07-01 09:07:15.429095 [DEBUG] zap_io.c:549 added tone detect [callwaiting-sas] = [440]

2010-07-01 09:07:15.429104 [DEBUG] zap_io.c:551 added tone generation [callwaiting-cas] = [v=0;%(80,0,2750,2130)]

2010-07-01 09:07:15.429113 [DEBUG] zap_io.c:549 added tone detect [callwaiting-cas] = [2750,2130]

2010-07-01 09:07:15.429125 [DEBUG] zap_io.c:549 added tone detect [fail1] = [913.8]

2010-07-01 09:07:15.429134 [DEBUG] zap_io.c:549 added tone detect [fail2] = [1370.6]

2010-07-01 09:07:15.429141 [DEBUG] zap_io.c:549 added tone detect [fail3] = [1776.7]

2010-07-01 09:07:15.429219 [NOTICE] switch_loadable_module.c:145 Adding Endpoint 'openzap'

2010-07-01 09:07:15.429254 [NOTICE] switch_loadable_module.c:251 Adding Application 'disable_ec'

2010-07-01 09:07:15.429290 [NOTICE] switch_loadable_module.c:251 Adding Application 'disable_dtmf'

2010-07-01 09:07:15.429332 [NOTICE] switch_loadable_module.c:251 Adding Application 'enable_dtmf'

2010-07-01 09:07:15.429381 [NOTICE] switch_loadable_module.c:273 Adding API Function 'oz'

[span wanpipe FXO]

name => OpenZAP

fxo-channel => 1:1

fxo-channel => 1:2

fxo-channel => 1:3

fxo-channel => 1:4

configuration name="openzap.conf" description="OpenZAP Configuration">

  <settings>

    <param name="debug" value="0"/>

    <!--<param name="hold-music" value="$${moh_uri}"/>-->

    <!--<param name="enable-analog-option" value="call-swap"/>-->

    <!--<param name="enable-analog-option" value="3-way"/>-->

  </settings>

  <boost_spans>

  </boost_spans>

  <analog_spans>

          <span id="FXO">

        <!--<param name="hold-music" value="$${moh_uri}"/>-->

        <param name="dialplan" value="XML"/>

        <param name="context" value="default"/>

         <!-- regex to stop dialing when it matches -->

        <!--<param name="dial-regex" value="5555"/>-->

        <!-- regex to stop dialing when it does not match -->

        <!--<param name="fail-dial-regex" value="^5"/>-->

</span>

  </analog_spans>

</configuration>

 wanrouter status

Devices currently active:

wanpipe1

Wanpipe Config:

Device name | Protocol Map | Adapter  | IRQ | Slot/IO | If's | CLK | Baud rate |

wanpipe1    | N/A          | A200/A400/B600/B700| 177 | 4       | 1    | N/A | 0         |

Wanrouter Status:

Device name | Protocol | Station | Status        |

wanpipe1    | A-ANALOG | N/A     | Connected     |