13 Nov
2008
13 Nov
'08
2:59 p.m.
If you tell FS to use Port 5090 then FS will be contacted through port 5090. But ports are not always symmetrical on both sides. The UA (e.g. Zoiper) will use an available port on his side, that can be 5060 but often is 2051 or even a higher port. Imagine, you may have several local phones with private Ip registered in your company under one external IP. It is then clear, that each phone has to use it's own port to be contacted from external. Best regards Peter henkoegema schrieb:
Brian West-3 wrote:
Because thats the contact's port number.
But I programmed port 5090.