Thanks Jerry, for making the wancfg_fs configuration available. On Wed, Jan 13, 2010 at 9:45 PM, Jerry Richards <jerry.richards@teotech.com>wrote:
Here are my instructions to install the wanpipe driver and I have not had your problem:
1) Download the following Wanpipe driver tarball wanpipe-<version>.tgz
2) Store the wanpipe-<version>.tgz file in the /opt folder.
3) tar xvfz wanpipe-<version>.tgz
4) cd wanpipe-<version>
5) make openzap
6) make install
7) make install_pri
8) wanrouter hwprobe // confirms successful wanpipe installation
9) /usr/sbin/wancfg_fs // starts wanpipe configuration utility
10) 1=NO // Change Freeswitch Configuration Directory
11) 1=T1 // Select Media Type
12) 1=YES (keep) // Configure Port 1 T1, B8ZS, ESF
13) 1=NORMAL // Select Clock
14) 1=NATIONAL // Select Switchtype
15) 1=CPE // Select Signaling Type
16) 1 // Input Group #
17) 1=YES // Enable H/W DTMF Detect
18) 1=YES // Enable FAX Detect
19) 1=YES=CONTINUE // Configuration Complete
20) 1=YES // Save Configuration
21) 1=YES // Wanrouter start on reboot
22) 1=YES // smg_ctrl start/stop on wanrouter start
23) Done.
Jerry
------------------------------ *From:* Magesh R [mailto:magesh.freeswitch@gmail.com] *Sent:* Tuesday, January 12, 2010 8:21 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Sangoma PRI installation for FreeSWITCH
Dear All, I have installed Sangoma PRI card in machine with following steps, * wget ftp://ftp.sangoma.com/linux/custom/3.5/wanpipe-3.5.8.7.tgz * tar -xvfz wanpipe-3.5.8.7.tgz * cd wanpipe-3.5.8.7 * make openzap * make install * make install_pri
I have executed "wanrouter hwprobe" command it prints the following details,
1 . AFT-A102-SH : SLOT=4 : BUS=3 : IRQ=11 : CPU=A : PORT=1 : HWEC=0 : V=36 2 . AFT-A102-SH : SLOT=4 : BUS=3 : IRQ=11 : CPU=A : PORT=2 : HWEC=0 : V=36
Card Cnt: A101-2=1
Next I have executed wancfg_fs script to configure the sangoma for freeswitch. It creates the following configuration files * wanpipe1.conf * wanpipe2.conf * smg_prid.conf * openzap.conf * openzap.conf.xml I have attached those files. I have started the wanrouter and printed the wanrouter status, Wanrouter Status:
Device name | Protocol | Station | Status | wanpipe1 | AFT TE1 | N/A | Connected | wanpipe2 | AFT TE1 | N/A | Disconnected |
Next I have started the smg_ctrl, but it failed to start. It prints the following things, smg_ctrl start
Starting processes... Loading SCTP...OK Starting sangoma_prid...OK sangoma_prid failed to start check /var/log/sangoma_mgd.log for errors
Stopping running processes... safe_sangoma not running... sangoma_prid is stopped Removing PID files...done
I have checked /var/log/sangoma_mgd.log file. But nothing was there.
Could any please tell me where I made mistake?
Thanks, Mag
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org