Sorry I hit 'send' by mistake... Hi, Is it possible to originate calls from specific A500 ports with FreeSWITCH? I am using a A504 (8 BRI interfaces), and I want some outbound calls to be made from specific BRI interfaces. I tried to modify OpenZAP config as follows: conf/openzap.conf [span wanpipe boostbri1] trunk_type => bri b-channel => 1:1-2 b-channel => 2:1-2 b-channel => 3:1-2 b-channel => 4:1-2 b-channel => 5:1-2 b-channel => 6:1-2 [span wanpipe boostbri2] trunk_type => bri b-channel => 7:1-2 b-channel => 8:1-2 conf/autoload_configs/openzap.conf.xml: <boost_spans> <span name="boostbri1"> <param name="dialplan" value="XML"/> <param name="context" value="isdn"/> </span> <span name="boostbri2"> <param name="dialplan" value="XML"/> <param name="context" value="isdn"/> </span> </boost_spans> When I try to originate call I am getting errors: freeswitch@emo-voip> originate openzap/2/a/123456 music API CALL [originate(openzap/2/a/123456 music)] output: -ERR NORMAL_CIRCUIT_CONGESTION 2009-09-04 09:23:34.87253 [CRIT] ozmod_ss7_boost.c:244 SPAN is not online. 2009-09-04 09:23:34.87253 [ERR] mod_openzap.c:1043 No channels available 2009-09-04 09:23:34.87253 [ERR] switch_ivr_originate.c:1510 Cannot create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION] Then I tried to modify the /etc/wanpipe/smg_bri.conf: ;Sangoma AFT-A500 port 11 [slot:8 bus:1 span:7] group=2 country=europe operator=etsi connection_type=point_to_point signalling=bri_nt spans=7 ;Sangoma AFT-A500 port 12 [slot:8 bus:1 span:8] group=2 country=europe operator=etsi connection_type=point_to_point signalling=bri_nt spans=8 i.e. changed 'group' to 2, but this doesn't help either. Marc Celsie from Sangoma's techdesk told me that I should ' dial X@gY with X being the number and Y being the group number'. How originate command should look like in this case? originate openzap/1/a/123456@g2 someExt ? I tried this syntax but with no effect. Marc also told me that there is a bug in FS which prevents groups from working. Should I fill bug report or feature request? Best regards, Vassil Panayotov