Sorry I hit 'send' by mistake...

Hi,

Is it possible to originate calls from specific A500 ports with FreeSWITCH?
I am using a A504 (8 BRI interfaces), and I want some outbound calls to be made from specific BRI interfaces.

I tried to modify OpenZAP config as follows:

conf/openzap.conf

[span wanpipe boostbri1]
trunk_type => bri
b-channel => 1:1-2
b-channel => 2:1-2
b-channel => 3:1-2
b-channel => 4:1-2
b-channel => 5:1-2
b-channel => 6:1-2

[span wanpipe boostbri2]
trunk_type => bri
b-channel => 7:1-2
b-channel => 8:1-2

conf/autoload_configs/openzap.

conf.xml:

<boost_spans>
    <span name="boostbri1">
      <param name="dialplan" value="XML"/>
      <param name="context" value="isdn"/>
      </span>

    <span name="boostbri2">
      <param name="dialplan" value="XML"/>
      <param name="context" value="isdn"/>
    </span>

</boost_spans>

When I try to originate call I am getting errors:

freeswitch@emo-voip> originate openzap/2/a/123456 music
API CALL [originate(openzap/2/a/123456 music)] output:
-ERR NORMAL_CIRCUIT_CONGESTION

2009-09-04 09:23:34.87253 [CRIT] ozmod_ss7_boost.c:244 SPAN is not online.
2009-09-04 09:23:34.87253 [ERR] mod_openzap.c:1043 No channels available
2009-09-04 09:23:34.87253 [ERR] switch_ivr_originate.c:1510 Cannot create outgoing channel of type [openzap] cause: [NORMAL_CIRCUIT_CONGESTION]

Then I tried to modify the /etc/wanpipe/smg_bri.conf:

;Sangoma AFT-A500 port 11 [slot:8 bus:1 span:7]
group=2
country=europe
operator=etsi
connection_type=point_to_point
signalling=bri_nt
spans=7

;Sangoma AFT-A500 port 12 [slot:8 bus:1 span:8]
group=2
country=europe
operator=etsi
connection_type=point_to_point
signalling=bri_nt
spans=8

i.e. changed 'group' to 2, but this doesn't help either.

Marc Celsie from Sangoma's techdesk told me that I should ' dial X@gY with X being the number and Y being the group number'.

How originate command should look like in this case?
originate openzap/1/a/123456@g2 someExt ?

I tried this syntax but with no effect. Marc also told me that there is a bug in FS which prevents groups from working.

Should I fill bug report or feature request?

Best regards,
Vassil Panayotov