I have an A104D on a box here. I'll need some time but I will see if I can reproduce your symptoms. I'll let you know what I find out. -MC On Wed, Jan 6, 2010 at 9:59 AM, Jerry Richards <jerry.richards@teotech.com>wrote:
When I attempt an internal-to-PSTN call, there are no Q931 packets sent out the PRI (I confirmed this using the Sangoma wanpipemon utility). I suspect this has something to do with my XML configuration. Below are my openzap/wanpipe configurations (which should all be defaulted). Do you seen anything wrong with these defaults, which might cause the following FS console error?
zap_io.c:1197 outgoing_call method not implemented!
*openzap.conf: *[span wanpipe smg_prid] name => smg_prid trunk_type =>t1 b-channel => 1:1-23
*autoload_configs/openzap.conf.xml:* <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> <!--<param name="hold-music" value="$${moh_uri}"/>--> <!--<param name="enable-analog-option" value="call-swap"/>--> <!--<param name="enable-analog-option" value="3-way"/>--> </settings> <boost_spans> <span id="smg_prid"> <!--<param name="hold-music" value="$${moh_uri}"/>--> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </boost_spans> <analog_spans> </analog_spans> </configuration>
*wanpipe.conf:* [defaults] codec_ms => 20 wink_ms => 150 flash_ms => 750
Thanks and Best Regards, Jerry
------------------------------ *From:* Michael Collins [mailto:msc@freeswitch.org] *Sent:* Tuesday, January 05, 2010 4:33 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] DESTINATION_OUT_OF_ORDER
On Mon, Jan 4, 2010 at 3:49 PM, Jerry Richards <jerry.richards@teotech.com
wrote:
Hello,
I have one FS instance that is working well with a PRI and running FS version 1.0.5pre9. Originally, it was running FS version 1.0.4 and I then upgraded it.
Now, I am trying to bring up another FS instance (basically a clone of the first), but the PRI does not work. When I attempt to make an internal-to-PSTN call, I get a "502 Bad Gateway" reply. I verified that both servers are using the latest Sangoma Wanpipe driver, and I copied the conf XML file tree from the old server to the new one. I think the problem has to do with the openzap module, but I'm having difficulty isolating the problem. Could it have built the openzap module incorrectly? Another difference is that I installed 1.0.5pre9 from scratch on the new server (i.e. it never had 1.0.4 running on it).
I put the FS log into the pastebin when an outbound call attempt is made:
http://pastebin.freeswitch.org/11675
Could someone give me a pointer on what to try next?
Jerry, I noticed this line: (OpenZAP/1:1/3491028@g1)
Is your carrier wanting full ten digit phone numbers? Try adding the area code on this and see what happens. The error usually would be something like "invalid number format" but I've seen carriers do stupid things like this. Try that first and see if it makes a difference. If not you'll need to turn on Q931 debugging as per the Sangoma wiki. (See http://wiki.freeswitch.org/wiki/OpenZAP#Debugging_PRI_With_wanpipemon for the link.)
-MC
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org