On Wed, Jan 6, 2010 at 9:59 AM, Jerry Richards <jerry.richards@teotech.com> wrote:

When I attempt an internal-to-PSTN call, there are no Q931 packets sent out the PRI (I confirmed this using the Sangoma wanpipemon utility). I suspect this has something to do with my XML configuration. Below are my openzap/wanpipe configurations (which should all be defaulted). Do you seen anything wrong with these defaults, which might cause the following FS console error?

zap_io.c:1197 outgoing_call method not implemented!

openzap.conf:
[span wanpipe smg_prid]
name => smg_prid
trunk_type =>t1
b-channel => 1:1-23

autoload_configs/openzap.conf.xml:
<configuration name="openzap.conf" description="OpenZAP Configuration">
  <settings>
    <param name="debug" value="9"/>
    
    
    
</settings>
<boost_spans>
    <span id="smg_prid">
      
      <param name="dialplan" value="XML"/>
      <param name="context" value="default"/>
      
      
      
      
    </span>
</boost_spans>
<analog_spans>
</analog_spans>
</configuration>

wanpipe.conf:
[defaults]
codec_ms => 20
wink_ms => 150
flash_ms => 750

Thanks and Best Regards,

Jerry

From: Michael Collins [mailto:msc@freeswitch.org]
Sent: Tuesday, January 05, 2010 4:33 PM
To: freeswitch-users@lists.freeswitch.org
Subject: Re: [Freeswitch-users] DESTINATION_OUT_OF_ORDER

On Mon, Jan 4, 2010 at 3:49 PM, Jerry Richards <jerry.richards@teotech.com> wrote:

Hello,

I have one FS instance that is working well with a PRI and running FS
version 1.0.5pre9. Originally, it was running FS version 1.0.4 and I then
upgraded it.

Now, I am trying to bring up another FS instance (basically a clone of the
first), but the PRI does not work. When I attempt to make an
internal-to-PSTN call, I get a "502 Bad Gateway" reply. I verified that
both servers are using the latest Sangoma Wanpipe driver, and I copied the
conf XML file tree from the old server to the new one. I think the problem
has to do with the openzap module, but I'm having difficulty isolating the
problem. Could it have built the openzap module incorrectly? Another
difference is that I installed 1.0.5pre9 from scratch on the new server
(i.e. it never had 1.0.4 running on it).

I put the FS log into the pastebin when an outbound call attempt is made:

http://pastebin.freeswitch.org/11675

Could someone give me a pointer on what to try next?

Jerry, I noticed this line:
(OpenZAP/1:1/3491028@g1)

Is your carrier wanting full ten digit phone numbers? Try adding the area code on this and see what happens. The error usually would be something like "invalid number format" but I've seen carriers do stupid things like this. Try that first and see if it makes a difference. If not you'll need to turn on Q931 debugging as per the Sangoma wiki. (See http://wiki.freeswitch.org/wiki/OpenZAP#Debugging_PRI_With_wanpipemon for the link.)

-MC

_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
http://www.freeswitch.org