Hi Rupa I've got similar settings here, but I can't make them work, nothing happens when I press R: The settings are DTMP over VoIP connections: Send settings [ ]Auto [X] Audio [ ] RFC 2833 [X] SIP Info Call Transfer Use the R key to initiate call ( ) Yes (X) No transfer with the SIP Refer Method Transfer Call by On-Hook (X) Yes ( ) No Derive Target address ( ) from SIP URL (X) from SIP Contact Header Find Target address automatically ( ) Yes (X) No Hook Flash (R-key) Application Type: dtmf-relay Application Signal: 16 That's all the settings, I had to set 'send settings' from auto to audio+SIP Info otherwise the R-Flash settings were disabled. But all in all, I think a *1 or something during the call would be a better method, because I should be able to make that work on al types of phones, right? Best regards Fribse /Running Freeswitch on pfSense running on a VMWare ESXi 4.0
11-02-2010 kl. 14:28 skrev Rupa Schomaker <rupa@rupa.com> i meddelelsen <b39273531002110528p42218d07q95e97485139315f1@mail.gmail.com>:
My Siemens A580 has options for controlling the R key. It seems that you can either have it setup for transfer or as a hook flash. Default is as a transfer key. I haven't succeeded in getting it to work for transfer and it is wayyyyy down low on my list of things to do with the phone.
From the web UI:
Call Transfer Use the R key to initiate call transfer with the SIP Refer method.:Yes No Transfer Call by On-Hook:Yes No Derive target address:from SIP URL from SIP contact header Find target addr. automatically:Yes No Hook Flash (R-key) R key settings are disabled because the R key is being used for call transfer. On Wed, Feb 10, 2010 at 11:45 PM, mailinglist <mailinglist@fribert.dk> wrote: Sorry for the repost, but the previous thread just died :-) I'm trying to get the possibility of transfering an incoming call from one extension to another, and give the possibility of turning it into a conference. I don't have a 'transfer' button. I do have an 'R' button on the Siemens handsets, and a 'Flash' button on the Sipura. The 'Flash' button gives me a new dialtone, gives the caller MOH, and then I can dial the new extension, and transfer the call, but not create a conference. But the Siemens handset does not have a 'flash', and pressing the R doesn't do anything. It might be two different features 'transfer' and 'conference'... But I thought that using the bind_meta_app would accomplish both. It's on an incoming call from the outside. So the situation: The Public folder has an entry that matches the dialed number, and does a transfer to 8202. Then the dialplan matches the 8202 with a group, and the phone rings. Somebody picks it up, finds out that it needs to be transferred to another extension, or transferred to a conference with a second extension. How do I construct that? Best regards Fribse /Running Freeswitch on pfSense running on a VMWare ESXi 4.0 _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- -Rupa